[Tue Mar 13 11:00:47 2012] Detection parameters:
  Position = (1286.2, 743.4) = 23 19 5.29 -42 15 26.0
  Extent = 0.5" x 0.5", rotation angle = 136 degrees
  Source counts = 18.4 +/- 4.4
  Background counts = 0.6
  Rate = 0.0006 +/- 0.0001

[Tue Mar 13 11:00:48 2012] Off-axis axis estimate = 2.20'
[Tue Mar 13 11:01:31 2012] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:01:31 2012] Initial guess for spatial extent in simple fitting = 0.45"
[Tue Mar 13 11:01:31 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.119
[Tue Mar 13 11:01:31 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 0.45"
[Tue Mar 13 11:01:32 2012] fullrun_ccd0_acisf12240_pi14-548_cl_pass0_src3.ximg exists
[Tue Mar 13 11:01:32 2012] fullrun_ccd0_acisf12240_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Mar 13 11:01:32 2012] Fit fullrun_ccd0_acisf12240_pi14-548_cl_pass0_src3 appears to have run properly
[Tue Mar 13 11:01:32 2012] fullrun_ccd0_acisf12240_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Mar 13 11:01:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12240_pi14-548_cl_pass0_tfrozen_src3.csv
[Tue Mar 13 11:01:32 2012] fullrun_ccd0_acisf12240_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Mar 13 11:01:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12240_pi14-548_cl_pass0_tfrozen_src3.csv
[Tue Mar 13 11:01:32 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12240_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12240_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:01:41 2012] Spatial fit model total counts = 19.152100, observed total counts = 22.000000
[Tue Mar 13 11:01:41 2012] Offset between fit and detection position for source 5 = 0.770304 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.770304 pixels
  Position = (1286.6, 744.1) = 23 19 5.29 -42 15 26.0
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 18.4 +/- 4.3
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Tue Mar 13 11:01:41 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:01:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:01:41 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:01:41 2012] Source does appear to be extended
[Tue Mar 13 11:01:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:02:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:02:05 2012] Initial guess for spatial extent in simple fitting = 0.42"
[Tue Mar 13 11:02:05 2012] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.810
[Tue Mar 13 11:02:05 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 0.42"
[Tue Mar 13 11:02:05 2012] fullrun_ccd0_acisf12240_pi14-548_cl_pass1_src3.ximg exists
[Tue Mar 13 11:02:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12240_pi14-548_cl_pass1_src3.csv
[Tue Mar 13 11:02:05 2012] fullrun_ccd0_acisf12240_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Mar 13 11:02:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12240_pi14-548_cl_pass1_src3.csv
[Tue Mar 13 11:02:05 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12240_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12240_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:02:06 2012] fullrun_ccd0_acisf12240_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Mar 13 11:02:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12240_pi14-548_cl_pass1_tfrozen_src3.csv
[Tue Mar 13 11:02:06 2012] fullrun_ccd0_acisf12240_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Mar 13 11:02:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12240_pi14-548_cl_pass1_tfrozen_src3.csv
[Tue Mar 13 11:02:06 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12240_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12240_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:02:15 2012] Spatial fit model total counts = 17.960100, observed total counts = 22.000000
[Tue Mar 13 11:02:15 2012] Offset between fit and detection position for source 5 = 0.024391 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.024391 pixels
  Position = (1286.6, 744.1) = 23 19 5.29 -42 15 25.9
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 17.4 +/- 4.2
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Tue Mar 13 11:02:15 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:02:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:02:15 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:02:15 2012] Source does appear to be extended
[Tue Mar 13 11:02:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:02:40 2012] Not overwriting source region fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src5_src.reg
[Tue Mar 13 11:02:40 2012] Extracting stamp from image fullrun_ccd0_acisf12240_pi14-548_cl_sm2.00.img.gz, (1267, 724) - (1306, 764)
[Tue Mar 13 11:02:40 2012] Writing fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src5.gif
[Tue Mar 13 11:02:50 2012] ../../acisf12240/products/events/fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src5_src.evt and ../../acisf12240/products/events/fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Tue Mar 13 11:02:50 2012] Size of ../../acisf12240/products/events/fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src5_src.evt.gz[events] = 18 counts
[Tue Mar 13 11:02:50 2012] Mean chipx,y = (861.33, 976.78)
[Tue Mar 13 11:02:50 2012] Mean tdetx,y = (4037.78, 4270.67)
[Tue Mar 13 11:02:50 2012] chipx,y range = (844.00-876.00, 962.00-995.00)
[Tue Mar 13 11:02:50 2012] Size of ../../acisf12240/products/events/fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 7 counts
[Tue Mar 13 11:02:50 2012] ../../acisf12240/products/images/fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src5_src.img and ../../acisf12240/products/images/fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Tue Mar 13 11:02:50 2012] ../../acisf12240/products/spectra/fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src5_src.pi and ../../acisf12240/products/spectra/fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Tue Mar 13 11:02:50 2012] Not generating rmf since there are only 17 counts
[Tue Mar 13 11:02:52 2012] ../../acisf12240/products/lightcurves/fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src5_src.lc and ../../acisf12240/products/lightcurves/fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Tue Mar 13 11:03:40 2012] 201.437
[Tue Mar 13 11:06:50 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:06:50 2012] Error reading totcts from fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src5_src.pi.gz
[Tue Mar 13 11:06:50 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:06:50 2012] Using photon index=1.80, rate=0.000585, arf fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src5.arf
[Tue Mar 13 11:06:50 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Mar 13 11:06:50 2012] Updating source flux to 6.9e-15
[Tue Mar 13 11:06:54 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting