[Tue Mar 13 11:00:46 2012] Detection parameters:
  Position = (838.5, 852.5) = 23 19 25.12 -42 14 32.2
  Extent = 1.0" x 0.7", rotation angle = 20 degrees
  Source counts = 274.1 +/- 16.8
  Background counts = 7.9
  Rate = 0.009 +/- 0.0006

[Tue Mar 13 11:00:48 2012] Off-axis axis estimate = 5.34'
[Tue Mar 13 11:01:31 2012] Using EEF radius (= 1.32 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:01:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 13 11:01:31 2012] Initial guess for spatial extent in simple fitting = 1.32"
[Tue Mar 13 11:01:31 2012] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.206
[Tue Mar 13 11:01:31 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 1.32"
[Tue Mar 13 11:01:32 2012] fullrun_ccd0_acisf12240_pi14-548_cl_pass0_src1.ximg exists
[Tue Mar 13 11:01:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12240_pi14-548_cl_pass0_src1.csv
[Tue Mar 13 11:01:32 2012] fullrun_ccd0_acisf12240_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Mar 13 11:01:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12240_pi14-548_cl_pass0_src1.csv
[Tue Mar 13 11:01:32 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12240_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12240_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:01:32 2012] fullrun_ccd0_acisf12240_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 13 11:01:32 2012] fullrun_ccd0_acisf12240_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 13 11:01:32 2012] Fit fullrun_ccd0_acisf12240_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 13 11:01:41 2012] Spatial fit model total counts = 283.416000, observed total counts = 284.000000
[Tue Mar 13 11:01:41 2012] Offset between fit and detection position for source 1 = 0.956747 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.956747 pixels
  Position = (839.2, 853.1) = 23 19 25.11 -42 14 32.1
  Extent = 1.4 (1.3-1.5)", rotation angle = 0
  Source counts = 281.0 +/- 16.8
  Background counts = 0.0
  Rate = 0.009 +/- 0.0006
[Tue Mar 13 11:01:41 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:01:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:01:41 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:01:41 2012] Source does appear to be extended
[Tue Mar 13 11:01:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:02:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:02:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 13 11:02:05 2012] Initial guess for spatial extent in simple fitting = 1.39"
[Tue Mar 13 11:02:05 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.952
[Tue Mar 13 11:02:05 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 1.39"
[Tue Mar 13 11:02:05 2012] fullrun_ccd0_acisf12240_pi14-548_cl_pass1_src1.ximg exists
[Tue Mar 13 11:02:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12240_pi14-548_cl_pass1_src1.csv
[Tue Mar 13 11:02:05 2012] fullrun_ccd0_acisf12240_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Mar 13 11:02:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12240_pi14-548_cl_pass1_src1.csv
[Tue Mar 13 11:02:05 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12240_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12240_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:02:05 2012] fullrun_ccd0_acisf12240_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 13 11:02:05 2012] fullrun_ccd0_acisf12240_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 13 11:02:05 2012] Fit fullrun_ccd0_acisf12240_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Mar 13 11:02:15 2012] Spatial fit model total counts = 283.158000, observed total counts = 286.000000
[Tue Mar 13 11:02:15 2012] Offset between fit and detection position for source 1 = 0.027955 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.027955 pixels
  Position = (839.2, 853.1) = 23 19 25.11 -42 14 32.1
  Extent = 1.4 (1.3-1.4)", rotation angle = 0
  Source counts = 280.5 +/- 16.7
  Background counts = 0.0
  Rate = 0.009 +/- 0.0006
[Tue Mar 13 11:02:15 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:02:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:02:15 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:02:15 2012] Source does appear to be extended
[Tue Mar 13 11:02:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:02:40 2012] Not overwriting source region fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src1_src.reg
[Tue Mar 13 11:02:40 2012] Extracting stamp from image fullrun_ccd0_acisf12240_pi14-548_cl_sm2.00.img.gz, (776, 789) - (903, 917)
[Tue Mar 13 11:02:40 2012] Writing fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src1.gif
[Tue Mar 13 11:02:41 2012] ../../acisf12240/products/events/fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src1_src.evt and ../../acisf12240/products/events/fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Mar 13 11:02:41 2012] Size of ../../acisf12240/products/events/fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src1_src.evt.gz[events] = 283 counts
[Tue Mar 13 11:02:41 2012] Mean chipx,y = (702.97, 542.78)
[Tue Mar 13 11:02:41 2012] Mean tdetx,y = (3603.78, 4429.03)
[Tue Mar 13 11:02:41 2012] chipx,y range = (682.00-726.00, 522.00-564.00)
[Tue Mar 13 11:02:41 2012] Size of ../../acisf12240/products/events/fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 55 counts
[Tue Mar 13 11:02:41 2012] ../../acisf12240/products/images/fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src1_src.img and ../../acisf12240/products/images/fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Mar 13 11:02:41 2012] ../../acisf12240/products/spectra/fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src1_src.pi and ../../acisf12240/products/spectra/fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Mar 13 11:02:44 2012] ../../acisf12240/products/lightcurves/fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src1_src.lc and ../../acisf12240/products/lightcurves/fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Mar 13 11:03:40 2012] Keeping rmf generated by specextract
[Tue Mar 13 11:03:40 2012] 184.571
[Tue Mar 13 11:06:50 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:06:50 2012] Error reading totcts from fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Mar 13 11:06:50 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:06:50 2012] Using photon index=1.80, rate=0.00945, arf fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src1.arf
[Tue Mar 13 11:06:50 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Mar 13 11:06:50 2012] Updating source flux to 1.2e-13
[Tue Mar 13 11:07:05 2012] Reading fit data from acisf12240/analysis//spectral/fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src1_pl.csv
[Tue Mar 13 11:07:05 2012] Spectral fit parameter nH value = 7.18427e+21
[Tue Mar 13 11:07:05 2012] Spectral fit parameter PhoIndex value = 2.3484
[Tue Mar 13 11:07:05 2012] Failed to get F(0.3-8.0) from acisf12240/analysis//spectral/fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Mar 13 11:07:05 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:07:05 2012] Using Nh = 7.2e+21, photon index=2.35, rate=0.00945, arf fullrun_ccd0_acisf12240_pi14-548_pass1_cl_src1.arf
[Tue Mar 13 11:07:05 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Mar 13 11:07:05 2012] Updating source flux to 1.1e-13