[Sun Nov  6 10:36:04 2011] Detection parameters:
  Position = (1156.7, 577.4) = 1 8 38.27 35 40 26.8
  Extent = 0.9" x 0.8", rotation angle = 22 degrees
  Source counts = 510.7 +/- 25.7
  Background counts = 152.3
  Rate = 0.005 +/- 0.0003

[Sun Nov  6 10:36:04 2011] Off-axis axis estimate = 10.00'
[Sun Nov  6 11:08:31 2011] Using EEF radius (= 4.43 ")to estimate initial spatial extent for simple fitting
[Sun Nov  6 11:08:31 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Nov  6 11:08:31 2011] Initial guess for spatial extent in simple fitting = 4.43"
[Sun Nov  6 11:08:31 2011] source mask rpix=9.0, npix_max = 360, mask sum = 345, frac = 0.956
[Sun Nov  6 11:08:31 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.43"
[Sun Nov  6 11:44:28 2011] fullrun_ccd6_acisf12239_pi14-548_cl_pass0_src1.ximg exists
[Sun Nov  6 11:44:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12239_pi14-548_cl_pass0_src1.csv
[Sun Nov  6 11:44:28 2011] fullrun_ccd6_acisf12239_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Nov  6 11:44:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12239_pi14-548_cl_pass0_src1.csv
[Sun Nov  6 11:44:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12239_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12239_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov  6 11:44:28 2011] fullrun_ccd6_acisf12239_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Nov  6 11:44:28 2011] fullrun_ccd6_acisf12239_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Nov  6 11:44:28 2011] Fit fullrun_ccd6_acisf12239_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Nov  6 12:18:55 2011] Spatial fit model total counts = 858.443000, observed total counts = 859.000000
[Sun Nov  6 12:18:55 2011] Offset between fit and detection position for source 3 = 1.966823 pixels
[Sun Nov  6 12:18:55 2011] 857.610000 total counts/ 118.020000 bgd. counts: snr = 68.079009
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.966823 pixels
  Position = (1157.9, 579.0) = 1 8 38.24 35 40 27.3
  Extent = 5.0 (4.7-5.3)", rotation angle = 0
  Source counts = 739.6 +/- 29.3
  Background counts = 118.0
  Rate = 0.008 +/- 0.0003
[Sun Nov  6 12:18:55 2011] Vigneting correction estimate = 1.000000
[Sun Nov  6 12:18:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov  6 12:18:55 2011] Assessing source extent using major axis lower bound
[Sun Nov  6 12:18:55 2011] Source does appear to be extended
[Sun Nov  6 12:18:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov  6 12:41:04 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Nov  6 12:41:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Nov  6 12:41:04 2011] Initial guess for spatial extent in simple fitting = 4.99"
[Sun Nov  6 12:41:04 2011] source mask rpix=10.1, npix_max = 452, mask sum = 462, frac = 1.021
[Sun Nov  6 12:41:04 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.99"
[Sun Nov  6 13:15:20 2011] fullrun_ccd6_acisf12239_pi14-548_cl_pass1_src1.ximg exists
[Sun Nov  6 13:15:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12239_pi14-548_cl_pass1_src1.csv
[Sun Nov  6 13:15:20 2011] fullrun_ccd6_acisf12239_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Nov  6 13:15:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12239_pi14-548_cl_pass1_src1.csv
[Sun Nov  6 13:15:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12239_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12239_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov  6 13:15:20 2011] fullrun_ccd6_acisf12239_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Nov  6 13:15:20 2011] fullrun_ccd6_acisf12239_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Nov  6 13:15:20 2011] Fit fullrun_ccd6_acisf12239_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Nov  6 13:48:43 2011] Spatial fit model total counts = 868.082000, observed total counts = 869.000000
[Sun Nov  6 13:48:43 2011] Offset between fit and detection position for source 3 = 0.194753 pixels
[Sun Nov  6 13:48:43 2011] 867.130000 total counts/ 105.631000 bgd. counts: snr = 74.092396
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.194753 pixels
  Position = (1157.8, 579.2) = 1 8 38.24 35 40 27.4
  Extent = 5.1 (4.8-5.4)", rotation angle = 0
  Source counts = 761.5 +/- 29.4
  Background counts = 105.6
  Rate = 0.008 +/- 0.0003
[Sun Nov  6 13:48:43 2011] Vigneting correction estimate = 1.000000
[Sun Nov  6 13:48:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov  6 13:48:43 2011] Assessing source extent using major axis lower bound
[Sun Nov  6 13:48:43 2011] Source does appear to be extended
[Sun Nov  6 13:48:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov  6 13:53:28 2011] Writing source region out to fullrun_ccd6_acisf12239_pi14-548_pass1_cl_src3_src.reg
[Sun Nov  6 13:53:28 2011] Extracting stamp from image fullrun_ccd6_acisf12239_pi14-548_cl_sm2.00.img.gz, (925, 346) - (1305, 812)
[Sun Nov  6 13:53:28 2011] Writing fullrun_ccd6_acisf12239_pi14-548_pass1_cl_src3.gif
[Sun Nov  6 13:53:30 2011] Size of ../../acisf12239/products/events/fullrun_ccd6_acisf12239_pi14-548_pass1_cl_src3_src.evt.gz[events] = 853 counts
[Sun Nov  6 13:53:30 2011] Mean chipx,y = (20.57, 607.14)
[Sun Nov  6 13:53:30 2011] Mean tdetx,y = (2895.57, 2309.14)
[Sun Nov  6 13:53:30 2011] chipx,y range = (2.00-70.00, 559.00-658.00)
[Sun Nov  6 13:53:30 2011] Size of ../../acisf12239/products/events/fullrun_ccd6_acisf12239_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 762 counts
[Sun Nov  6 13:53:31 2011] rmf not found, will run specextract
[Sun Nov  6 13:53:31 2011] arf not found, will run specextract
[Sun Nov  6 13:54:04 2011] ../../acisf12239/products/spectra/fullrun_ccd6_acisf12239_pi14-548_pass1_cl_src3.warf not found
[Sun Nov  6 13:54:04 2011] ../../acisf12239/products/spectra/fullrun_ccd6_acisf12239_pi14-548_pass1_cl_src3.wrmf not found
[Sun Nov  6 13:54:04 2011] Removal of ../../acisf12239/products/spectra/fullrun_ccd6_acisf12239_pi14-548_pass1_cl_src3.soff failed
[Sun Nov  6 14:07:05 2011] Keeping rmf generated by specextract
[Sun Nov  6 14:07:05 2011] 124.846
[Sun Nov  6 14:18:44 2011] Updating aperture counts using extracted products
[Sun Nov  6 14:18:44 2011] Error reading totcts from fullrun_ccd6_acisf12239_pi14-548_pass1_cl_src3_src.pi.gz
[Sun Nov  6 14:18:44 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov  6 14:18:44 2011] Using photon index=1.80, rate=0.00775, arf fullrun_ccd6_acisf12239_pi14-548_pass1_cl_src3.arf
[Sun Nov  6 14:18:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Nov  6 14:18:44 2011] Updating source flux to 1.3e-13
[Sun Nov  6 14:19:12 2011] Reading fit data from acisf12239/analysis//spectral/fullrun_ccd6_acisf12239_pi14-548_pass1_cl_src3_pl.csv
[Sun Nov  6 14:19:12 2011] Spectral fit parameter nH value = 2.02283e+20
[Sun Nov  6 14:19:12 2011] Spectral fit parameter PhoIndex value = 1.59282
[Sun Nov  6 14:19:12 2011] Failed to get F(0.3-8.0) from acisf12239/analysis//spectral/fullrun_ccd6_acisf12239_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sun Nov  6 14:19:12 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov  6 14:19:12 2011] Using Nh = 2e+20, photon index=1.59, rate=0.00775, arf fullrun_ccd6_acisf12239_pi14-548_pass1_cl_src3.arf
[Sun Nov  6 14:19:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Nov  6 14:19:12 2011] Updating source flux to 1.4e-13