[Sat Oct 15 16:15:51 2011] Detection parameters:
  Position = (96.1, 416.4) = 0 54 50.33 -37 38 49.5
  Extent = 0.5" x 0.5", rotation angle = 133 degrees
  Source counts = 422.4 +/- 20.6
  Background counts = 2.6
  Rate = 0.007 +/- 0.0003

[Sat Oct 15 16:15:51 2011] Off-axis axis estimate = 0.55'
[Sat Oct 15 17:38:36 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 17:38:36 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Sat Oct 15 17:38:36 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.897
[Sat Oct 15 17:38:36 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.39"
[Sat Oct 15 18:00:36 2011] fullrun_ccd3_acisf12238_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 15 18:00:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12238_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 18:00:36 2011] fullrun_ccd3_acisf12238_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 15 18:00:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12238_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 18:00:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12238_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12238_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 18:00:36 2011] fullrun_ccd3_acisf12238_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 15 18:00:36 2011] fullrun_ccd3_acisf12238_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 15 18:00:36 2011] Fit fullrun_ccd3_acisf12238_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 15 18:17:02 2011] Spatial fit model total counts = 433.402000, observed total counts = 434.000000
[Sat Oct 15 18:17:02 2011] Offset between fit and detection position for source 3 = 0.696873 pixels
[Sat Oct 15 18:17:02 2011] 433.865700 total counts/ 21.455700 bgd. counts: snr = 89.034401
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.696873 pixels
  Position = (96.6, 416.9) = 0 54 50.34 -37 38 49.5
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 412.4 +/- 20.8
  Background counts = 21.5
  Rate = 0.007 +/- 0.0003
[Sat Oct 15 18:17:02 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 18:17:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 18:17:02 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 18:17:02 2011] Source does appear to be extended
[Sat Oct 15 18:17:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 19:35:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 19:35:57 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Sat Oct 15 19:35:57 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.821
[Sat Oct 15 19:35:57 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.42"
[Sat Oct 15 19:51:16 2011] fullrun_ccd3_acisf12238_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 15 19:51:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12238_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 19:51:16 2011] fullrun_ccd3_acisf12238_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 15 19:51:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12238_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 19:51:16 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12238_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12238_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 19:51:16 2011] fullrun_ccd3_acisf12238_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 15 19:51:16 2011] fullrun_ccd3_acisf12238_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 15 19:51:16 2011] Fit fullrun_ccd3_acisf12238_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 15 20:13:17 2011] Spatial fit model total counts = 432.192000, observed total counts = 434.000000
[Sat Oct 15 20:13:17 2011] Offset between fit and detection position for source 3 = 0.003957 pixels
[Sat Oct 15 20:13:17 2011] 432.042400 total counts/ 20.813400 bgd. counts: snr = 90.138893
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.003957 pixels
  Position = (96.6, 416.9) = 0 54 50.34 -37 38 49.5
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 411.2 +/- 20.8
  Background counts = 20.8
  Rate = 0.007 +/- 0.0003
[Sat Oct 15 20:13:17 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 20:13:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 20:13:17 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 20:13:17 2011] Source does appear to be extended
[Sat Oct 15 20:13:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 20:51:37 2011] Writing source region out to fullrun_ccd3_acisf12238_pi14-548_pass1_cl_src3_src.reg
[Sat Oct 15 20:51:37 2011] Extracting stamp from image fullrun_ccd3_acisf12238_pi14-548_cl_sm2.00.img.gz, (77, 398) - (116, 436)
[Sat Oct 15 20:51:37 2011] Writing fullrun_ccd3_acisf12238_pi14-548_pass1_cl_src3.gif
[Sat Oct 15 20:51:38 2011] Size of ../../acisf12238/products/events/fullrun_ccd3_acisf12238_pi14-548_pass1_cl_src3_src.evt.gz[events] = 417 counts
[Sat Oct 15 20:51:38 2011] Mean chipx,y = (944.96, 958.66)
[Sat Oct 15 20:51:38 2011] Mean tdetx,y = (4173.34, 4005.96)
[Sat Oct 15 20:51:38 2011] chipx,y range = (927.00-963.00, 940.00-976.00)
[Sat Oct 15 20:51:38 2011] Size of ../../acisf12238/products/events/fullrun_ccd3_acisf12238_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 15 counts
[Sat Oct 15 20:51:40 2011] rmf not found, will run specextract
[Sat Oct 15 20:51:40 2011] arf not found, will run specextract
[Sat Oct 15 20:52:09 2011] ../../acisf12238/products/spectra/fullrun_ccd3_acisf12238_pi14-548_pass1_cl_src3.warf not found
[Sat Oct 15 20:52:09 2011] ../../acisf12238/products/spectra/fullrun_ccd3_acisf12238_pi14-548_pass1_cl_src3.wrmf not found
[Sat Oct 15 20:52:09 2011] Removal of ../../acisf12238/products/spectra/fullrun_ccd3_acisf12238_pi14-548_pass1_cl_src3.soff failed
[Sat Oct 15 21:02:24 2011] Keeping rmf generated by specextract
[Sat Oct 15 21:02:24 2011] 202.29
[Sat Oct 15 21:03:06 2011] Updating aperture counts using extracted products
[Sat Oct 15 21:03:06 2011] Error reading totcts from fullrun_ccd3_acisf12238_pi14-548_pass1_cl_src3_src.pi.gz
[Sat Oct 15 21:03:06 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 21:03:06 2011] Using photon index=1.80, rate=0.00653, arf fullrun_ccd3_acisf12238_pi14-548_pass1_cl_src3.arf
[Sat Oct 15 21:03:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 21:03:06 2011] Updating source flux to 7.4e-14
[Sat Oct 15 21:03:26 2011] Reading fit data from acisf12238/analysis//spectral/fullrun_ccd3_acisf12238_pi14-548_pass1_cl_src3_pl.csv
[Sat Oct 15 21:03:26 2011] Spectral fit parameter nH value = 3.75806e+21
[Sat Oct 15 21:03:26 2011] Spectral fit parameter PhoIndex value = 1.41129
[Sat Oct 15 21:03:26 2011] Failed to get F(0.3-8.0) from acisf12238/analysis//spectral/fullrun_ccd3_acisf12238_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Oct 15 21:03:26 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 21:03:26 2011] Using Nh = 3.8e+21, photon index=1.41, rate=0.00653, arf fullrun_ccd3_acisf12238_pi14-548_pass1_cl_src3.arf
[Sat Oct 15 21:03:26 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 21:03:26 2011] Updating source flux to 9.2e-14