[Sat Oct 15 16:15:18 2011] Detection parameters:
  Position = (689.8, 156.1) = 0 55 6.25 -37 37 54.0
  Extent = 0.8" x 0.5", rotation angle = 9 degrees
  Source counts = 14.4 +/- 4.0
  Background counts = 1.6
  Rate = 0.0002 +/- 6e-05

[Sat Oct 15 16:15:18 2011] Off-axis axis estimate = 2.74'
[Sat Oct 15 17:22:42 2011] Using EEF radius (= 0.53 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 17:22:42 2011] Initial guess for spatial extent in simple fitting = 0.53"
[Sat Oct 15 17:22:42 2011] source mask rpix=1.1, npix_max = 9, mask sum = 12, frac = 1.204
[Sat Oct 15 17:22:42 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.53"
[Sat Oct 15 17:38:36 2011] fullrun_ccd2_acisf12238_pi14-548_cl_pass0_src10.ximg exists
[Sat Oct 15 17:38:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12238_pi14-548_cl_pass0_src10.csv
[Sat Oct 15 17:38:36 2011] fullrun_ccd2_acisf12238_pi14-548_cl_pass0_src10_1.ximg exists
[Sat Oct 15 17:38:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12238_pi14-548_cl_pass0_src10.csv
[Sat Oct 15 17:38:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12238_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12238_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 17:38:36 2011] fullrun_ccd2_acisf12238_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sat Oct 15 17:38:36 2011] fullrun_ccd2_acisf12238_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Oct 15 17:38:36 2011] Fit fullrun_ccd2_acisf12238_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Oct 15 18:17:00 2011] Spatial fit model total counts = 17.857900, observed total counts = 18.000000
[Sat Oct 15 18:17:00 2011] Offset between fit and detection position for source 18 = 0.636268 pixels
[Sat Oct 15 18:17:00 2011] 18.380200 total counts/ 4.177900 bgd. counts: snr = 6.948318
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.636268 pixels
  Position = (690.2, 156.6) = 0 55 6.26 -37 37 54.0
  Extent = 0.7 (0.4-1.1)", rotation angle = 0
  Source counts = 14.2 +/- 4.3
  Background counts = 4.2
  Rate = 0.0002 +/- 7e-05
[Sat Oct 15 18:17:00 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 18:17:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 18:17:00 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 18:17:00 2011] Source does appear to be extended
[Sat Oct 15 18:17:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 19:21:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 19:21:42 2011] Initial guess for spatial extent in simple fitting = 0.67"
[Sat Oct 15 19:21:42 2011] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.870
[Sat Oct 15 19:21:42 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.67"
[Sat Oct 15 19:35:57 2011] fullrun_ccd2_acisf12238_pi14-548_cl_pass1_src10.ximg exists
[Sat Oct 15 19:35:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12238_pi14-548_cl_pass1_src10.csv
[Sat Oct 15 19:35:57 2011] fullrun_ccd2_acisf12238_pi14-548_cl_pass1_src10_1.ximg exists
[Sat Oct 15 19:35:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12238_pi14-548_cl_pass1_src10.csv
[Sat Oct 15 19:35:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12238_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12238_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 19:35:57 2011] fullrun_ccd2_acisf12238_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Sat Oct 15 19:35:57 2011] fullrun_ccd2_acisf12238_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Oct 15 19:35:57 2011] Fit fullrun_ccd2_acisf12238_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Oct 15 20:13:15 2011] Spatial fit model total counts = 17.666600, observed total counts = 18.000000
[Sat Oct 15 20:13:15 2011] Offset between fit and detection position for source 18 = 0.089041 pixels
[Sat Oct 15 20:13:15 2011] 18.125760 total counts/ 4.844860 bgd. counts: snr = 6.033744
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.089041 pixels
  Position = (690.3, 156.6) = 0 55 6.25 -37 37 54.0
  Extent = 0.6 (0.4-1.1)", rotation angle = 0
  Source counts = 13.3 +/- 4.3
  Background counts = 4.8
  Rate = 0.0002 +/- 7e-05
[Sat Oct 15 20:13:15 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 20:13:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 20:13:15 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 20:13:15 2011] Source does appear to be extended
[Sat Oct 15 20:13:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 20:41:55 2011] Writing source region out to fullrun_ccd2_acisf12238_pi14-548_pass1_cl_src18_src.reg
[Sat Oct 15 20:41:55 2011] Extracting stamp from image fullrun_ccd2_acisf12238_pi14-548_cl_sm2.00.img.gz, (662, 128) - (719, 185)
[Sat Oct 15 20:41:55 2011] Writing fullrun_ccd2_acisf12238_pi14-548_pass1_cl_src18.gif
[Sat Oct 15 20:47:31 2011] Size of ../../acisf12238/products/events/fullrun_ccd2_acisf12238_pi14-548_pass1_cl_src18_src.evt.gz[events] = 16 counts
[Sat Oct 15 20:47:31 2011] Mean chipx,y = (49.06, 707.56)
[Sat Oct 15 20:47:31 2011] Mean tdetx,y = (3768.56, 4036.94)
[Sat Oct 15 20:47:31 2011] chipx,y range = (35.00-65.00, 695.00-728.00)
[Sat Oct 15 20:47:31 2011] Size of ../../acisf12238/products/events/fullrun_ccd2_acisf12238_pi14-548_pass1_cl_src18_bgd.evt.gz[events] = 18 counts
[Sat Oct 15 20:47:32 2011] Not generating rmf since there are only 13 counts
[Sat Oct 15 20:47:32 2011] arf not found, will run specextract
[Sat Oct 15 20:47:58 2011] ../../acisf12238/products/spectra/fullrun_ccd2_acisf12238_pi14-548_pass1_cl_src18.warf not found
[Sat Oct 15 20:47:58 2011] ../../acisf12238/products/spectra/fullrun_ccd2_acisf12238_pi14-548_pass1_cl_src18.wrmf not found
[Sat Oct 15 20:47:58 2011] Removal of ../../acisf12238/products/spectra/fullrun_ccd2_acisf12238_pi14-548_pass1_cl_src18.soff failed
[Sat Oct 15 20:51:36 2011] Spectrum 18 has only 13 counts, deleting rmf
[Sat Oct 15 20:51:36 2011] 196.195
[Sat Oct 15 21:03:06 2011] Updating aperture counts using extracted products
[Sat Oct 15 21:03:06 2011] Error reading totcts from fullrun_ccd2_acisf12238_pi14-548_pass1_cl_src18_src.pi.gz
[Sat Oct 15 21:03:06 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 21:03:06 2011] Using photon index=1.80, rate=0.000211, arf fullrun_ccd2_acisf12238_pi14-548_pass1_cl_src18.arf
[Sat Oct 15 21:03:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 21:03:06 2011] Updating source flux to 2.5e-15
[Sat Oct 15 21:03:18 2011] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 15 21:03:19 2011] acisf12238/analysis//spectral/fullrun_ccd2_acisf12238_pi14-548_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete