[Sat Oct 15 16:14:46 2011] Detection parameters:
  Position = (563.3, 601.0) = 0 54 46.01 -37 45 20.9
  Extent = 1.5" x 1.1", rotation angle = 116 degrees
  Source counts = 44.7 +/- 7.1
  Background counts = 6.3
  Rate = 0.0007 +/- 0.0001

[Sat Oct 15 16:14:46 2011] Off-axis axis estimate = 6.79'
[Sat Oct 15 16:38:38 2011] Using EEF radius (= 2.06 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 16:38:38 2011] Initial guess for spatial extent in simple fitting = 2.06"
[Sat Oct 15 16:38:38 2011] source mask rpix=4.2, npix_max = 87, mask sum = 90, frac = 1.026
[Sat Oct 15 16:38:38 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 2.06"
[Sat Oct 15 17:22:41 2011] fullrun_ccd1_acisf12238_pi14-548_cl_pass0_src13.ximg exists
[Sat Oct 15 17:22:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12238_pi14-548_cl_pass0_src13.csv
[Sat Oct 15 17:22:41 2011] fullrun_ccd1_acisf12238_pi14-548_cl_pass0_src13_1.ximg exists
[Sat Oct 15 17:22:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12238_pi14-548_cl_pass0_src13.csv
[Sat Oct 15 17:22:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12238_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12238_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 17:22:41 2011] fullrun_ccd1_acisf12238_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Sat Oct 15 17:22:41 2011] fullrun_ccd1_acisf12238_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Oct 15 17:22:41 2011] Fit fullrun_ccd1_acisf12238_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Sat Oct 15 18:16:58 2011] Spatial fit model total counts = 55.181100, observed total counts = 56.000000
[Sat Oct 15 18:16:58 2011] Offset between fit and detection position for source 23 = 0.970588 pixels
[Sat Oct 15 18:16:58 2011] 54.212380 total counts/ 5.836880 bgd. counts: snr = 20.023274
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.970588 pixels
  Position = (563.7, 601.8) = 0 54 46.01 -37 45 20.7
  Extent = 1.6 (1.2-2.1)", rotation angle = 0
  Source counts = 48.4 +/- 7.4
  Background counts = 5.8
  Rate = 0.0008 +/- 0.0001
[Sat Oct 15 18:16:58 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 18:16:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 18:16:58 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 18:16:58 2011] Source does appear to be extended
[Sat Oct 15 18:16:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 18:34:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 18:34:12 2011] Initial guess for spatial extent in simple fitting = 1.64"
[Sat Oct 15 18:34:12 2011] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.950
[Sat Oct 15 18:34:12 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 1.64"
[Sat Oct 15 19:21:42 2011] fullrun_ccd1_acisf12238_pi14-548_cl_pass1_src13.ximg exists
[Sat Oct 15 19:21:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12238_pi14-548_cl_pass1_src13.csv
[Sat Oct 15 19:21:42 2011] fullrun_ccd1_acisf12238_pi14-548_cl_pass1_src13_1.ximg exists
[Sat Oct 15 19:21:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12238_pi14-548_cl_pass1_src13.csv
[Sat Oct 15 19:21:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12238_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12238_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 19:21:42 2011] fullrun_ccd1_acisf12238_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Sat Oct 15 19:21:42 2011] fullrun_ccd1_acisf12238_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Oct 15 19:21:42 2011] Fit fullrun_ccd1_acisf12238_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Oct 15 20:13:13 2011] Spatial fit model total counts = 53.797100, observed total counts = 54.000000
[Sat Oct 15 20:13:13 2011] Offset between fit and detection position for source 23 = 0.183327 pixels
[Sat Oct 15 20:13:13 2011] 53.009800 total counts/ 11.675700 bgd. counts: snr = 12.096703
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.183327 pixels
  Position = (563.7, 601.7) = 0 54 46.01 -37 45 20.8
  Extent = 1.4 (1.1-1.8)", rotation angle = 0
  Source counts = 41.3 +/- 7.3
  Background counts = 11.7
  Rate = 0.0007 +/- 0.0001
[Sat Oct 15 20:13:13 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 20:13:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 20:13:13 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 20:13:13 2011] Source does appear to be extended
[Sat Oct 15 20:13:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 20:22:37 2011] Writing source region out to fullrun_ccd1_acisf12238_pi14-548_pass1_cl_src23_src.reg
[Sat Oct 15 20:22:37 2011] Extracting stamp from image fullrun_ccd1_acisf12238_pi14-548_cl_sm2.00.img.gz, (498, 536) - (629, 667)
[Sat Oct 15 20:22:37 2011] Writing fullrun_ccd1_acisf12238_pi14-548_pass1_cl_src23.gif
[Sat Oct 15 20:29:30 2011] Size of ../../acisf12238/products/events/fullrun_ccd1_acisf12238_pi14-548_pass1_cl_src23_src.evt.gz[events] = 51 counts
[Sat Oct 15 20:29:30 2011] Mean chipx,y = (605.76, 579.82)
[Sat Oct 15 20:29:30 2011] Mean tdetx,y = (4552.18, 4712.76)
[Sat Oct 15 20:29:30 2011] chipx,y range = (585.00-626.00, 557.00-602.00)
[Sat Oct 15 20:29:30 2011] Size of ../../acisf12238/products/events/fullrun_ccd1_acisf12238_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 76 counts
[Sat Oct 15 20:29:31 2011] Not generating rmf since there are only 41 counts
[Sat Oct 15 20:29:31 2011] arf not found, will run specextract
[Sat Oct 15 20:29:55 2011] ../../acisf12238/products/spectra/fullrun_ccd1_acisf12238_pi14-548_pass1_cl_src23.warf not found
[Sat Oct 15 20:29:55 2011] ../../acisf12238/products/spectra/fullrun_ccd1_acisf12238_pi14-548_pass1_cl_src23.wrmf not found
[Sat Oct 15 20:29:55 2011] Removal of ../../acisf12238/products/spectra/fullrun_ccd1_acisf12238_pi14-548_pass1_cl_src23.soff failed
[Sat Oct 15 20:41:54 2011] Spectrum 23 has only 41 counts, deleting rmf
[Sat Oct 15 20:41:54 2011] 182.371
[Sat Oct 15 21:03:05 2011] Updating aperture counts using extracted products
[Sat Oct 15 21:03:05 2011] Error reading totcts from fullrun_ccd1_acisf12238_pi14-548_pass1_cl_src23_src.pi.gz
[Sat Oct 15 21:03:06 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 21:03:06 2011] Using photon index=1.80, rate=0.000656, arf fullrun_ccd1_acisf12238_pi14-548_pass1_cl_src23.arf
[Sat Oct 15 21:03:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 21:03:06 2011] Updating source flux to 8.3e-15
[Sat Oct 15 21:03:17 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 15 21:03:18 2011] acisf12238/analysis//spectral/fullrun_ccd1_acisf12238_pi14-548_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete