[Sat Oct 15 16:14:46 2011] Detection parameters:
  Position = (602.2, 1100.2) = 0 54 44.40 -37 41 15.2
  Extent = 0.5" x 0.5", rotation angle = 141 degrees
  Source counts = 22.5 +/- 4.9
  Background counts = 1.5
  Rate = 0.0004 +/- 8e-05

[Sat Oct 15 16:14:46 2011] Off-axis axis estimate = 3.07'
[Sat Oct 15 16:38:38 2011] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 16:38:38 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Sat Oct 15 16:38:38 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.027
[Sat Oct 15 16:38:38 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 0.60"
[Sat Oct 15 17:22:41 2011] fullrun_ccd1_acisf12238_pi14-548_cl_pass0_src20.ximg exists
[Sat Oct 15 17:22:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12238_pi14-548_cl_pass0_src20.csv
[Sat Oct 15 17:22:41 2011] fullrun_ccd1_acisf12238_pi14-548_cl_pass0_src20_1.ximg exists
[Sat Oct 15 17:22:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12238_pi14-548_cl_pass0_src20.csv
[Sat Oct 15 17:22:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12238_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12238_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 17:22:41 2011] fullrun_ccd1_acisf12238_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Sat Oct 15 17:22:41 2011] fullrun_ccd1_acisf12238_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Oct 15 17:22:41 2011] Fit fullrun_ccd1_acisf12238_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Sat Oct 15 18:16:58 2011] Spatial fit model total counts = 27.278500, observed total counts = 28.000000
[Sat Oct 15 18:16:58 2011] Offset between fit and detection position for source 17 = 0.678549 pixels
[Sat Oct 15 18:16:58 2011] 26.612930 total counts/ 4.222730 bgd. counts: snr = 10.895855
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.678549 pixels
  Position = (602.7, 1100.7) = 0 54 44.40 -37 41 15.2
  Extent = 0.6 (0.5-0.8)", rotation angle = 0
  Source counts = 22.4 +/- 5.2
  Background counts = 4.2
  Rate = 0.0004 +/- 8e-05
[Sat Oct 15 18:16:58 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 18:16:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 18:16:58 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 18:16:58 2011] Source does appear to be extended
[Sat Oct 15 18:16:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 18:34:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 18:34:12 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Sat Oct 15 18:34:12 2011] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.739
[Sat Oct 15 18:34:12 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 0.61"
[Sat Oct 15 19:21:42 2011] fullrun_ccd1_acisf12238_pi14-548_cl_pass1_src20.ximg exists
[Sat Oct 15 19:21:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12238_pi14-548_cl_pass1_src20.csv
[Sat Oct 15 19:21:42 2011] fullrun_ccd1_acisf12238_pi14-548_cl_pass1_src20_1.ximg exists
[Sat Oct 15 19:21:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12238_pi14-548_cl_pass1_src20.csv
[Sat Oct 15 19:21:42 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12238_pi14-548_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12238_pi14-548_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 19:21:42 2011] fullrun_ccd1_acisf12238_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Sat Oct 15 19:21:42 2011] fullrun_ccd1_acisf12238_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Sat Oct 15 19:21:42 2011] Fit fullrun_ccd1_acisf12238_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Sat Oct 15 20:13:13 2011] Spatial fit model total counts = 24.586100, observed total counts = 28.000000
[Sat Oct 15 20:13:13 2011] Offset between fit and detection position for source 17 = 0.250086 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.250086 pixels
  Position = (602.7, 1100.4) = 0 54 44.40 -37 41 15.4
  Extent = 0.9 (0.7-1.1)" x 0.5 (0.4-0.7)", rotation angle = 77 (50-101) degrees
  Source counts = 23.8 +/- 4.9
  Background counts = 0.0
  Rate = 0.0004 +/- 8e-05
[Sat Oct 15 20:13:13 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 20:13:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 20:13:13 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 20:13:13 2011] Source does appear to be extended
[Sat Oct 15 20:13:13 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.98
[Sat Oct 15 20:22:37 2011] Writing source region out to fullrun_ccd1_acisf12238_pi14-548_pass1_cl_src17_src.reg
[Sat Oct 15 20:22:37 2011] Extracting stamp from image fullrun_ccd1_acisf12238_pi14-548_cl_sm2.00.img.gz, (562, 1060) - (643, 1141)
[Sat Oct 15 20:22:37 2011] Writing fullrun_ccd1_acisf12238_pi14-548_pass1_cl_src17.gif
[Sat Oct 15 20:32:52 2011] Size of ../../acisf12238/products/events/fullrun_ccd1_acisf12238_pi14-548_pass1_cl_src17_src.evt.gz[events] = 24 counts
[Sat Oct 15 20:32:52 2011] Mean chipx,y = (121.88, 723.38)
[Sat Oct 15 20:32:52 2011] Mean tdetx,y = (4408.62, 4228.88)
[Sat Oct 15 20:32:52 2011] chipx,y range = (107.00-142.00, 704.00-737.00)
[Sat Oct 15 20:32:52 2011] Size of ../../acisf12238/products/events/fullrun_ccd1_acisf12238_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 34 counts
[Sat Oct 15 20:32:53 2011] Not generating rmf since there are only 23 counts
[Sat Oct 15 20:32:53 2011] arf not found, will run specextract
[Sat Oct 15 20:33:17 2011] ../../acisf12238/products/spectra/fullrun_ccd1_acisf12238_pi14-548_pass1_cl_src17.warf not found
[Sat Oct 15 20:33:17 2011] ../../acisf12238/products/spectra/fullrun_ccd1_acisf12238_pi14-548_pass1_cl_src17.wrmf not found
[Sat Oct 15 20:33:17 2011] Removal of ../../acisf12238/products/spectra/fullrun_ccd1_acisf12238_pi14-548_pass1_cl_src17.soff failed
[Sat Oct 15 20:41:54 2011] Spectrum 17 has only 24 counts, deleting rmf
[Sat Oct 15 20:41:54 2011] 200.366
[Sat Oct 15 21:03:05 2011] Updating aperture counts using extracted products
[Sat Oct 15 21:03:05 2011] Error reading totcts from fullrun_ccd1_acisf12238_pi14-548_pass1_cl_src17_src.pi.gz
[Sat Oct 15 21:03:06 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 21:03:06 2011] Using photon index=1.80, rate=0.000378, arf fullrun_ccd1_acisf12238_pi14-548_pass1_cl_src17.arf
[Sat Oct 15 21:03:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 21:03:06 2011] Updating source flux to 4.4e-15
[Sat Oct 15 21:03:17 2011] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 15 21:03:18 2011] acisf12238/analysis//spectral/fullrun_ccd1_acisf12238_pi14-548_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete