[Thu Jan 19 03:55:38 2012] Detection parameters:
  Position = (729.8, 842.6) = 3 32 20.79 -27 52 22.6
  Extent = 0.7" x 0.6", rotation angle = 7 degrees
  Source counts = 11.5 +/- 3.6
  Background counts = 1.5
  Rate = 0.0002 +/- 7e-05

[Thu Jan 19 03:55:39 2012] Off-axis axis estimate = 4.55'
[Thu Jan 19 05:14:09 2012] Using EEF radius (= 1.01 ")to estimate initial spatial extent for simple fitting
[Thu Jan 19 05:14:09 2012] Initial guess for spatial extent in simple fitting = 1.01"
[Thu Jan 19 05:14:09 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.960
[Thu Jan 19 05:14:09 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 1.01"
[Thu Jan 19 05:22:22 2012] fullrun_ccd3_acisf12234_pi14-548_cl_pass0_src8.ximg exists
[Thu Jan 19 05:22:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12234_pi14-548_cl_pass0_src8.csv
[Thu Jan 19 05:22:22 2012] fullrun_ccd3_acisf12234_pi14-548_cl_pass0_src8_1.ximg exists
[Thu Jan 19 05:22:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12234_pi14-548_cl_pass0_src8.csv
[Thu Jan 19 05:22:22 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12234_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12234_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 05:22:22 2012] fullrun_ccd3_acisf12234_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Thu Jan 19 05:22:22 2012] fullrun_ccd3_acisf12234_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Jan 19 05:22:22 2012] Fit fullrun_ccd3_acisf12234_pi14-548_cl_pass0_tfrozen_src8 appears to have run properly
[Thu Jan 19 05:31:00 2012] Spatial fit model total counts = 15.279400, observed total counts = 16.000000
[Thu Jan 19 05:31:00 2012] Offset between fit and detection position for source 5 = 0.655105 pixels
[Thu Jan 19 05:31:00 2012] 15.526210 total counts/ 3.087710 bgd. counts: snr = 7.078639
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.655105 pixels
  Position = (730.4, 842.9) = 3 32 20.79 -27 52 22.6
  Extent = 0.9 (0.5-1.4)", rotation angle = 0
  Source counts = 12.4 +/- 3.9
  Background counts = 3.1
  Rate = 0.0003 +/- 8e-05
[Thu Jan 19 05:31:00 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 05:31:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 05:31:00 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 05:31:00 2012] Source does appear to be extended
[Thu Jan 19 05:31:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 06:55:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 19 06:55:05 2012] Initial guess for spatial extent in simple fitting = 0.91"
[Thu Jan 19 06:55:05 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.899
[Thu Jan 19 06:55:05 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 0.91"
[Thu Jan 19 07:04:17 2012] fullrun_ccd3_acisf12234_pi14-548_cl_pass1_src8.ximg exists
[Thu Jan 19 07:04:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12234_pi14-548_cl_pass1_src8.csv
[Thu Jan 19 07:04:17 2012] fullrun_ccd3_acisf12234_pi14-548_cl_pass1_src8_1.ximg exists
[Thu Jan 19 07:04:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12234_pi14-548_cl_pass1_src8.csv
[Thu Jan 19 07:04:17 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12234_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12234_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 07:04:17 2012] fullrun_ccd3_acisf12234_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Thu Jan 19 07:04:17 2012] fullrun_ccd3_acisf12234_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Jan 19 07:04:17 2012] Fit fullrun_ccd3_acisf12234_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Thu Jan 19 07:25:09 2012] Spatial fit model total counts = 15.206000, observed total counts = 16.000000
[Thu Jan 19 07:25:09 2012] Offset between fit and detection position for source 5 = 0.052288 pixels
[Thu Jan 19 07:25:09 2012] 15.288450 total counts/ 2.677250 bgd. counts: snr = 7.707472
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.052288 pixels
  Position = (730.4, 842.9) = 3 32 20.79 -27 52 22.6
  Extent = 0.9 (0.5-1.4)", rotation angle = 0
  Source counts = 12.6 +/- 3.9
  Background counts = 2.7
  Rate = 0.0003 +/- 8e-05
[Thu Jan 19 07:25:09 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 07:25:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 07:25:09 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 07:25:09 2012] Source does appear to be extended
[Thu Jan 19 07:25:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 08:01:20 2012] Writing source region out to fullrun_ccd3_acisf12234_pi14-548_pass1_cl_src5_src.reg
[Thu Jan 19 08:01:20 2012] Extracting stamp from image fullrun_ccd3_acisf12234_pi14-548_cl_sm2.00.img.gz, (689, 801) - (772, 885)
[Thu Jan 19 08:01:20 2012] Writing fullrun_ccd3_acisf12234_pi14-548_pass1_cl_src5.gif
[Thu Jan 19 08:05:32 2012] Size of ../../acisf12234/products/events/fullrun_ccd3_acisf12234_pi14-548_pass1_cl_src5_src.evt.gz[events] = 15 counts
[Thu Jan 19 08:05:32 2012] Mean chipx,y = (533.67, 651.20)
[Thu Jan 19 08:05:32 2012] Mean tdetx,y = (4480.80, 3594.67)
[Thu Jan 19 08:05:32 2012] chipx,y range = (520.00-555.00, 629.00-669.00)
[Thu Jan 19 08:05:32 2012] Size of ../../acisf12234/products/events/fullrun_ccd3_acisf12234_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 31 counts
[Thu Jan 19 08:05:33 2012] Not generating rmf since there are only 12 counts
[Thu Jan 19 08:05:33 2012] arf not found, will run specextract
[Thu Jan 19 08:05:59 2012] ../../acisf12234/products/spectra/fullrun_ccd3_acisf12234_pi14-548_pass1_cl_src5.warf not found
[Thu Jan 19 08:05:59 2012] ../../acisf12234/products/spectra/fullrun_ccd3_acisf12234_pi14-548_pass1_cl_src5.wrmf not found
[Thu Jan 19 08:05:59 2012] Removal of ../../acisf12234/products/spectra/fullrun_ccd3_acisf12234_pi14-548_pass1_cl_src5.soff failed
[Thu Jan 19 08:15:13 2012] Spectrum 5 has only 13 counts, deleting rmf
[Thu Jan 19 08:15:13 2012] 181.974
[Thu Jan 19 08:15:59 2012] Updating aperture counts using extracted products
[Thu Jan 19 08:15:59 2012] Error reading totcts from fullrun_ccd3_acisf12234_pi14-548_pass1_cl_src5_src.pi.gz
[Thu Jan 19 08:15:59 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 08:15:59 2012] Using photon index=1.80, rate=0.000257, arf fullrun_ccd3_acisf12234_pi14-548_pass1_cl_src5.arf
[Thu Jan 19 08:15:59 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 08:15:59 2012] Updating source flux to 3.4e-15
[Thu Jan 19 08:16:22 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jan 19 08:16:23 2012] acisf12234/analysis//spectral/fullrun_ccd3_acisf12234_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete