[Thu Jan 19 03:55:35 2012] Detection parameters:
  Position = (495.6, 340.6) = 3 32 10.94 -27 48 55.9
  Extent = 0.6" x 0.5", rotation angle = 62 degrees
  Source counts = 10.1 +/- 3.3
  Background counts = 0.9
  Rate = 0.0002 +/- 7e-05

[Thu Jan 19 03:55:36 2012] Off-axis axis estimate = 3.69'
[Thu Jan 19 04:53:49 2012] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Thu Jan 19 04:53:49 2012] Initial guess for spatial extent in simple fitting = 0.74"
[Thu Jan 19 04:53:49 2012] source mask rpix=1.5, npix_max = 16, mask sum = 15, frac = 0.928
[Thu Jan 19 04:53:49 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 0.74"
[Thu Jan 19 05:14:09 2012] fullrun_ccd2_acisf12234_pi14-548_cl_pass0_src15.ximg exists
[Thu Jan 19 05:14:09 2012] fullrun_ccd2_acisf12234_pi14-548_cl_pass0_src15_1.ximg exists
[Thu Jan 19 05:14:09 2012] Fit fullrun_ccd2_acisf12234_pi14-548_cl_pass0_src15 appears to have run properly
[Thu Jan 19 05:14:09 2012] fullrun_ccd2_acisf12234_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Thu Jan 19 05:14:09 2012] fullrun_ccd2_acisf12234_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Jan 19 05:14:09 2012] Fit fullrun_ccd2_acisf12234_pi14-548_cl_pass0_tfrozen_src15 appears to have run properly
[Thu Jan 19 05:30:59 2012] Spatial fit model total counts = 12.688300, observed total counts = 13.000000
[Thu Jan 19 05:30:59 2012] Offset between fit and detection position for source 23 = 0.861017 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.861017 pixels
  Position = (496.2, 341.2) = 3 32 10.94 -27 48 55.8
  Extent = 0.7 (0.5-0.8)", rotation angle = 0
  Source counts = 12.0 +/- 3.5
  Background counts = 0.0
  Rate = 0.0002 +/- 7e-05
[Thu Jan 19 05:30:59 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 05:30:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 05:30:59 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 05:30:59 2012] Source does appear to be extended
[Thu Jan 19 05:30:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 06:25:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 19 06:25:37 2012] Initial guess for spatial extent in simple fitting = 0.67"
[Thu Jan 19 06:25:37 2012] source mask rpix=1.4, npix_max = 13, mask sum = 15, frac = 1.090
[Thu Jan 19 06:25:37 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 0.67"
[Thu Jan 19 06:55:05 2012] fullrun_ccd2_acisf12234_pi14-548_cl_pass1_src15.ximg exists
[Thu Jan 19 06:55:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12234_pi14-548_cl_pass1_src15.csv
[Thu Jan 19 06:55:05 2012] fullrun_ccd2_acisf12234_pi14-548_cl_pass1_src15_1.ximg exists
[Thu Jan 19 06:55:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12234_pi14-548_cl_pass1_src15.csv
[Thu Jan 19 06:55:05 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12234_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12234_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 06:55:05 2012] fullrun_ccd2_acisf12234_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Thu Jan 19 06:55:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12234_pi14-548_cl_pass1_tfrozen_src15.csv
[Thu Jan 19 06:55:05 2012] fullrun_ccd2_acisf12234_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Thu Jan 19 06:55:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12234_pi14-548_cl_pass1_tfrozen_src15.csv
[Thu Jan 19 06:55:05 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12234_pi14-548_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12234_pi14-548_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 07:25:08 2012] Spatial fit model total counts = 11.606100, observed total counts = 13.000000
[Thu Jan 19 07:25:08 2012] Offset between fit and detection position for source 23 = 0.004184 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.004184 pixels
  Position = (496.2, 341.2) = 3 32 10.94 -27 48 55.8
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 10.9 +/- 3.3
  Background counts = 0.0
  Rate = 0.0002 +/- 7e-05
[Thu Jan 19 07:25:08 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 07:25:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 07:25:08 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 07:25:08 2012] Source does appear to be extended
[Thu Jan 19 07:25:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 07:46:46 2012] Writing source region out to fullrun_ccd2_acisf12234_pi14-548_pass1_cl_src23_src.reg
[Thu Jan 19 07:46:46 2012] Extracting stamp from image fullrun_ccd2_acisf12234_pi14-548_cl_sm2.00.img.gz, (465, 311) - (527, 372)
[Thu Jan 19 07:46:46 2012] Writing fullrun_ccd2_acisf12234_pi14-548_pass1_cl_src23.gif
[Thu Jan 19 07:54:04 2012] Size of ../../acisf12234/products/events/fullrun_ccd2_acisf12234_pi14-548_pass1_cl_src23_src.evt.gz[events] = 11 counts
[Thu Jan 19 07:54:04 2012] Mean chipx,y = (506.73, 919.18)
[Thu Jan 19 07:54:04 2012] Mean tdetx,y = (3980.18, 3579.27)
[Thu Jan 19 07:54:04 2012] chipx,y range = (490.00-523.00, 907.00-939.00)
[Thu Jan 19 07:54:04 2012] Size of ../../acisf12234/products/events/fullrun_ccd2_acisf12234_pi14-548_pass1_cl_src23_bgd.evt.gz[events] = 19 counts
[Thu Jan 19 07:54:05 2012] Not generating rmf since there are only 10 counts
[Thu Jan 19 07:54:05 2012] arf not found, will run specextract
[Thu Jan 19 07:54:43 2012] ../../acisf12234/products/spectra/fullrun_ccd2_acisf12234_pi14-548_pass1_cl_src23.warf not found
[Thu Jan 19 07:54:43 2012] ../../acisf12234/products/spectra/fullrun_ccd2_acisf12234_pi14-548_pass1_cl_src23.wrmf not found
[Thu Jan 19 07:54:43 2012] Removal of ../../acisf12234/products/spectra/fullrun_ccd2_acisf12234_pi14-548_pass1_cl_src23.soff failed
[Thu Jan 19 08:01:20 2012] Spectrum 23 has only 11 counts, deleting rmf
[Thu Jan 19 08:01:20 2012] 171.967
[Thu Jan 19 08:15:58 2012] Updating aperture counts using extracted products
[Thu Jan 19 08:15:58 2012] Error reading totcts from fullrun_ccd2_acisf12234_pi14-548_pass1_cl_src23_src.pi.gz
[Thu Jan 19 08:15:58 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 08:15:58 2012] Using photon index=1.80, rate=0.000222, arf fullrun_ccd2_acisf12234_pi14-548_pass1_cl_src23.arf
[Thu Jan 19 08:15:58 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 08:15:58 2012] Updating source flux to 3e-15
[Thu Jan 19 08:16:19 2012] Source 23 has fewer than 100.000000 counts, skipping spectral fitting