[Thu Jan 19 03:55:32 2012] Detection parameters:
  Position = (1074.3, 349.3) = 3 32 41.92 -27 52 2.0
  Extent = 0.5" x 0.5", rotation angle = 45 degrees
  Source counts = 12.1 +/- 3.6
  Background counts = 0.9
  Rate = 0.0002 +/- 7e-05

[Thu Jan 19 03:55:33 2012] Off-axis axis estimate = 5.15'
[Thu Jan 19 04:30:32 2012] Using EEF radius (= 1.24 ")to estimate initial spatial extent for simple fitting
[Thu Jan 19 04:30:32 2012] Initial guess for spatial extent in simple fitting = 1.24"
[Thu Jan 19 04:30:32 2012] source mask rpix=2.5, npix_max = 36, mask sum = 33, frac = 0.904
[Thu Jan 19 04:30:32 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 1.24"
[Thu Jan 19 04:53:49 2012] fullrun_ccd1_acisf12234_pi14-548_cl_pass0_src12.ximg exists
[Thu Jan 19 04:53:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12234_pi14-548_cl_pass0_src12.csv
[Thu Jan 19 04:53:49 2012] fullrun_ccd1_acisf12234_pi14-548_cl_pass0_src12_1.ximg exists
[Thu Jan 19 04:53:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12234_pi14-548_cl_pass0_src12.csv
[Thu Jan 19 04:53:49 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12234_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12234_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 04:53:49 2012] fullrun_ccd1_acisf12234_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Thu Jan 19 04:53:49 2012] fullrun_ccd1_acisf12234_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Jan 19 04:53:49 2012] Fit fullrun_ccd1_acisf12234_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Thu Jan 19 05:30:57 2012] Spatial fit model total counts = 16.291600, observed total counts = 16.000000
[Thu Jan 19 05:30:57 2012] Offset between fit and detection position for source 11 = 1.725543 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.725543 pixels
  Position = (1076.0, 349.1) = 3 32 41.88 -27 52 2.3
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 16.3 +/- 4.0
  Background counts = 0.0
  Rate = 0.0003 +/- 8e-05
[Thu Jan 19 05:30:57 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 05:30:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 05:30:57 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 05:30:57 2012] Source does appear to be extended
[Thu Jan 19 05:30:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 06:02:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 19 06:02:40 2012] Initial guess for spatial extent in simple fitting = 0.83"
[Thu Jan 19 06:02:40 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.728
[Thu Jan 19 06:02:40 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 0.83"
[Thu Jan 19 06:25:37 2012] fullrun_ccd1_acisf12234_pi14-548_cl_pass1_src12.ximg exists
[Thu Jan 19 06:25:37 2012] fullrun_ccd1_acisf12234_pi14-548_cl_pass1_src12_1.ximg exists
[Thu Jan 19 06:25:37 2012] Fit fullrun_ccd1_acisf12234_pi14-548_cl_pass1_src12 appears to have run properly
[Thu Jan 19 06:25:37 2012] fullrun_ccd1_acisf12234_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Thu Jan 19 06:25:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12234_pi14-548_cl_pass1_tfrozen_src12.csv
[Thu Jan 19 06:25:37 2012] fullrun_ccd1_acisf12234_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Jan 19 06:25:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12234_pi14-548_cl_pass1_tfrozen_src12.csv
[Thu Jan 19 06:25:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12234_pi14-548_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12234_pi14-548_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 07:25:06 2012] Spatial fit model total counts = 15.476600, observed total counts = 17.000000
[Thu Jan 19 07:25:06 2012] Offset between fit and detection position for source 11 = 0.201643 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.201643 pixels
  Position = (1075.9, 349.3) = 3 32 41.88 -27 52 2.2
  Extent = 0.9 (0.6-1.0)", rotation angle = 0
  Source counts = 15.7 +/- 4.0
  Background counts = 0.0
  Rate = 0.0003 +/- 8e-05
[Thu Jan 19 07:25:06 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 07:25:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 07:25:06 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 07:25:06 2012] Source does appear to be extended
[Thu Jan 19 07:25:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 07:35:48 2012] Writing source region out to fullrun_ccd1_acisf12234_pi14-548_pass1_cl_src11_src.reg
[Thu Jan 19 07:35:48 2012] Extracting stamp from image fullrun_ccd1_acisf12234_pi14-548_cl_sm2.00.img.gz, (1036, 310) - (1116, 389)
[Thu Jan 19 07:35:48 2012] Writing fullrun_ccd1_acisf12234_pi14-548_pass1_cl_src11.gif
[Thu Jan 19 07:41:54 2012] Size of ../../acisf12234/products/events/fullrun_ccd1_acisf12234_pi14-548_pass1_cl_src11_src.evt.gz[events] = 16 counts
[Thu Jan 19 07:41:54 2012] Mean chipx,y = (11.75, 398.62)
[Thu Jan 19 07:41:54 2012] Mean tdetx,y = (4733.38, 4118.75)
[Thu Jan 19 07:41:54 2012] chipx,y range = (2.00-24.00, 380.00-418.00)
[Thu Jan 19 07:41:54 2012] Size of ../../acisf12234/products/events/fullrun_ccd1_acisf12234_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 19 counts
[Thu Jan 19 07:41:55 2012] Not generating rmf since there are only 15 counts
[Thu Jan 19 07:41:55 2012] arf not found, will run specextract
[Thu Jan 19 07:42:16 2012] ../../acisf12234/products/spectra/fullrun_ccd1_acisf12234_pi14-548_pass1_cl_src11.warf not found
[Thu Jan 19 07:42:16 2012] ../../acisf12234/products/spectra/fullrun_ccd1_acisf12234_pi14-548_pass1_cl_src11.wrmf not found
[Thu Jan 19 07:42:16 2012] Removal of ../../acisf12234/products/spectra/fullrun_ccd1_acisf12234_pi14-548_pass1_cl_src11.soff failed
[Thu Jan 19 07:46:46 2012] Spectrum 11 has only 16 counts, deleting rmf
[Thu Jan 19 07:46:46 2012] 96.9121
[Thu Jan 19 08:15:58 2012] Updating aperture counts using extracted products
[Thu Jan 19 08:15:58 2012] Error reading totcts from fullrun_ccd1_acisf12234_pi14-548_pass1_cl_src11_src.pi.gz
[Thu Jan 19 08:15:58 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 08:15:58 2012] Using photon index=1.80, rate=0.00032, arf fullrun_ccd1_acisf12234_pi14-548_pass1_cl_src11.arf
[Thu Jan 19 08:15:58 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 08:15:58 2012] Updating source flux to 8e-15
[Thu Jan 19 08:16:14 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting