[Thu Jan 19 03:55:28 2012] Detection parameters:
  Position = (870.5, 232.1) = 3 32 29.97 -27 45 30.0
  Extent = 0.5" x 0.5", rotation angle = 125 degrees
  Source counts = 29.7 +/- 5.6
  Background counts = 1.3
  Rate = 0.0006 +/- 0.0001

[Thu Jan 19 03:55:29 2012] Off-axis axis estimate = 2.63'
[Thu Jan 19 03:57:59 2012] Using EEF radius (= 0.51 ")to estimate initial spatial extent for simple fitting
[Thu Jan 19 03:57:59 2012] Initial guess for spatial extent in simple fitting = 0.51"
[Thu Jan 19 03:57:59 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.948
[Thu Jan 19 03:57:59 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 0.51"
[Thu Jan 19 04:30:31 2012] fullrun_ccd0_acisf12234_pi14-548_cl_pass0_src10.ximg exists
[Thu Jan 19 04:30:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12234_pi14-548_cl_pass0_src10.csv
[Thu Jan 19 04:30:31 2012] fullrun_ccd0_acisf12234_pi14-548_cl_pass0_src10_1.ximg exists
[Thu Jan 19 04:30:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12234_pi14-548_cl_pass0_src10.csv
[Thu Jan 19 04:30:31 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12234_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12234_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 04:30:31 2012] fullrun_ccd0_acisf12234_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Thu Jan 19 04:30:31 2012] fullrun_ccd0_acisf12234_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Thu Jan 19 04:30:31 2012] Fit fullrun_ccd0_acisf12234_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Thu Jan 19 05:30:55 2012] Spatial fit model total counts = 32.065600, observed total counts = 32.000000
[Thu Jan 19 05:30:55 2012] Offset between fit and detection position for source 10 = 1.011467 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.011467 pixels
  Position = (871.3, 232.7) = 3 32 29.96 -27 45 29.9
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 32.3 +/- 5.7
  Background counts = 0.0
  Rate = 0.0007 +/- 0.0001
[Thu Jan 19 05:30:55 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 05:30:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 05:30:55 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 05:30:55 2012] Source does appear to be extended
[Thu Jan 19 05:30:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 05:31:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 19 05:31:20 2012] Initial guess for spatial extent in simple fitting = 0.58"
[Thu Jan 19 05:31:20 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.795
[Thu Jan 19 05:31:20 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 0.58"
[Thu Jan 19 06:02:40 2012] fullrun_ccd0_acisf12234_pi14-548_cl_pass1_src10.ximg exists
[Thu Jan 19 06:02:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12234_pi14-548_cl_pass1_src10.csv
[Thu Jan 19 06:02:40 2012] fullrun_ccd0_acisf12234_pi14-548_cl_pass1_src10_1.ximg exists
[Thu Jan 19 06:02:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12234_pi14-548_cl_pass1_src10.csv
[Thu Jan 19 06:02:40 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12234_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12234_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 06:02:40 2012] fullrun_ccd0_acisf12234_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Thu Jan 19 06:02:40 2012] fullrun_ccd0_acisf12234_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Jan 19 06:02:40 2012] Fit fullrun_ccd0_acisf12234_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Thu Jan 19 07:25:04 2012] Spatial fit model total counts = 30.983000, observed total counts = 33.000000
[Thu Jan 19 07:25:04 2012] Offset between fit and detection position for source 10 = 0.050867 pixels
[Thu Jan 19 07:25:04 2012] 31.731440 total counts/ 1.878840 bgd. counts: snr = 21.778966
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.050867 pixels
  Position = (871.3, 232.7) = 3 32 29.96 -27 45 30.0
  Extent = 0.6 (0.5-0.7)", rotation angle = 0
  Source counts = 29.9 +/- 5.6
  Background counts = 1.9
  Rate = 0.0006 +/- 0.0001
[Thu Jan 19 07:25:04 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 07:25:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 07:25:04 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 07:25:04 2012] Source does appear to be extended
[Thu Jan 19 07:25:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 07:25:29 2012] Writing source region out to fullrun_ccd0_acisf12234_pi14-548_pass1_cl_src10_src.reg
[Thu Jan 19 07:25:29 2012] Extracting stamp from image fullrun_ccd0_acisf12234_pi14-548_cl_sm2.00.img.gz, (844, 205) - (899, 260)
[Thu Jan 19 07:25:29 2012] Writing fullrun_ccd0_acisf12234_pi14-548_pass1_cl_src10.gif
[Thu Jan 19 07:30:18 2012] Size of ../../acisf12234/products/events/fullrun_ccd0_acisf12234_pi14-548_pass1_cl_src10_src.evt.gz[events] = 31 counts
[Thu Jan 19 07:30:18 2012] Mean chipx,y = (900.00, 823.23)
[Thu Jan 19 07:30:18 2012] Mean tdetx,y = (3884.23, 4232.00)
[Thu Jan 19 07:30:18 2012] chipx,y range = (880.00-917.00, 800.00-839.00)
[Thu Jan 19 07:30:18 2012] Size of ../../acisf12234/products/events/fullrun_ccd0_acisf12234_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 7 counts
[Thu Jan 19 07:30:19 2012] Not generating rmf since there are only 29 counts
[Thu Jan 19 07:30:19 2012] arf not found, will run specextract
[Thu Jan 19 07:30:44 2012] ../../acisf12234/products/spectra/fullrun_ccd0_acisf12234_pi14-548_pass1_cl_src10.warf not found
[Thu Jan 19 07:30:44 2012] ../../acisf12234/products/spectra/fullrun_ccd0_acisf12234_pi14-548_pass1_cl_src10.wrmf not found
[Thu Jan 19 07:30:44 2012] Removal of ../../acisf12234/products/spectra/fullrun_ccd0_acisf12234_pi14-548_pass1_cl_src10.soff failed
[Thu Jan 19 07:35:47 2012] Spectrum 10 has only 30 counts, deleting rmf
[Thu Jan 19 07:35:47 2012] 198.364
[Thu Jan 19 08:15:57 2012] Updating aperture counts using extracted products
[Thu Jan 19 08:15:57 2012] Error reading totcts from fullrun_ccd0_acisf12234_pi14-548_pass1_cl_src10_src.pi.gz
[Thu Jan 19 08:15:58 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 08:15:58 2012] Using photon index=1.80, rate=0.000607, arf fullrun_ccd0_acisf12234_pi14-548_pass1_cl_src10.arf
[Thu Jan 19 08:15:58 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 08:15:58 2012] Updating source flux to 7.3e-15
[Thu Jan 19 08:16:02 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting