[Thu Jan 19 03:55:27 2012] Detection parameters:
  Position = (649.5, 933.2) = 3 32 38.15 -27 39 45.0
  Extent = 3.3" x 2.6", rotation angle = 170 degrees
  Source counts = 174.3 +/- 14.6
  Background counts = 37.7
  Rate = 0.004 +/- 0.0003

[Thu Jan 19 03:55:29 2012] Off-axis axis estimate = 8.65'
[Thu Jan 19 03:57:59 2012] Using EEF radius (= 3.31 ")to estimate initial spatial extent for simple fitting
[Thu Jan 19 03:57:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 19 03:57:59 2012] Initial guess for spatial extent in simple fitting = 3.31"
[Thu Jan 19 03:57:59 2012] source mask rpix=6.7, npix_max = 208, mask sum = 210, frac = 1.008
[Thu Jan 19 03:57:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.31"
[Thu Jan 19 04:30:31 2012] fullrun_ccd0_acisf12234_pi14-548_cl_pass0_src1.ximg exists
[Thu Jan 19 04:30:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12234_pi14-548_cl_pass0_src1.csv
[Thu Jan 19 04:30:31 2012] fullrun_ccd0_acisf12234_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Jan 19 04:30:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12234_pi14-548_cl_pass0_src1.csv
[Thu Jan 19 04:30:31 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12234_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12234_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 04:30:31 2012] fullrun_ccd0_acisf12234_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Jan 19 04:30:31 2012] fullrun_ccd0_acisf12234_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jan 19 04:30:31 2012] Fit fullrun_ccd0_acisf12234_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jan 19 05:30:55 2012] Spatial fit model total counts = 220.088000, observed total counts = 221.000000
[Thu Jan 19 05:30:55 2012] Offset between fit and detection position for source 1 = 1.489317 pixels
[Thu Jan 19 05:30:55 2012] 219.742600 total counts/ 51.413600 bgd. counts: snr = 23.475775
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.489317 pixels
  Position = (650.6, 934.1) = 3 32 38.12 -27 39 44.8
  Extent = 2.8 (2.5-3.2)", rotation angle = 0
  Source counts = 168.3 +/- 14.8
  Background counts = 51.4
  Rate = 0.003 +/- 0.0003
[Thu Jan 19 05:30:55 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 05:30:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 05:30:55 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 05:30:55 2012] Source does appear to be extended
[Thu Jan 19 05:30:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 05:31:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jan 19 05:31:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jan 19 05:31:20 2012] Initial guess for spatial extent in simple fitting = 2.81"
[Thu Jan 19 05:31:20 2012] source mask rpix=5.7, npix_max = 154, mask sum = 156, frac = 1.012
[Thu Jan 19 05:31:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.81"
[Thu Jan 19 06:02:40 2012] fullrun_ccd0_acisf12234_pi14-548_cl_pass1_src1.ximg exists
[Thu Jan 19 06:02:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12234_pi14-548_cl_pass1_src1.csv
[Thu Jan 19 06:02:40 2012] fullrun_ccd0_acisf12234_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Jan 19 06:02:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12234_pi14-548_cl_pass1_src1.csv
[Thu Jan 19 06:02:40 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12234_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12234_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jan 19 06:02:40 2012] fullrun_ccd0_acisf12234_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Jan 19 06:02:40 2012] fullrun_ccd0_acisf12234_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jan 19 06:02:40 2012] Fit fullrun_ccd0_acisf12234_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jan 19 07:25:04 2012] Spatial fit model total counts = 214.213000, observed total counts = 213.000000
[Thu Jan 19 07:25:04 2012] Offset between fit and detection position for source 1 = 0.080418 pixels
[Thu Jan 19 07:25:04 2012] 213.966400 total counts/ 52.473400 bgd. counts: snr = 22.293800
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.080418 pixels
  Position = (650.7, 934.1) = 3 32 38.12 -27 39 44.9
  Extent = 2.6 (2.3-3.1)", rotation angle = 0
  Source counts = 161.5 +/- 14.6
  Background counts = 52.5
  Rate = 0.003 +/- 0.0003
[Thu Jan 19 07:25:04 2012] Vigneting correction estimate = 1.000000
[Thu Jan 19 07:25:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jan 19 07:25:04 2012] Assessing source extent using major axis lower bound
[Thu Jan 19 07:25:04 2012] Source does appear to be extended
[Thu Jan 19 07:25:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jan 19 07:25:28 2012] Writing source region out to fullrun_ccd0_acisf12234_pi14-548_pass1_cl_src1_src.reg
[Thu Jan 19 07:25:28 2012] Extracting stamp from image fullrun_ccd0_acisf12234_pi14-548_cl_sm2.00.img.gz, (530, 813) - (772, 1055)
[Thu Jan 19 07:25:28 2012] Writing fullrun_ccd0_acisf12234_pi14-548_pass1_cl_src1.gif
[Thu Jan 19 07:25:32 2012] Size of ../../acisf12234/products/events/fullrun_ccd0_acisf12234_pi14-548_pass1_cl_src1_src.evt.gz[events] = 198 counts
[Thu Jan 19 07:25:32 2012] Mean chipx,y = (353.05, 321.32)
[Thu Jan 19 07:25:32 2012] Mean tdetx,y = (3382.32, 4778.95)
[Thu Jan 19 07:25:32 2012] chipx,y range = (324.00-388.00, 295.00-352.00)
[Thu Jan 19 07:25:32 2012] Size of ../../acisf12234/products/events/fullrun_ccd0_acisf12234_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 237 counts
[Thu Jan 19 07:25:33 2012] rmf not found, will run specextract
[Thu Jan 19 07:25:33 2012] arf not found, will run specextract
[Thu Jan 19 07:25:55 2012] ../../acisf12234/products/spectra/fullrun_ccd0_acisf12234_pi14-548_pass1_cl_src1.warf not found
[Thu Jan 19 07:25:55 2012] ../../acisf12234/products/spectra/fullrun_ccd0_acisf12234_pi14-548_pass1_cl_src1.wrmf not found
[Thu Jan 19 07:25:55 2012] Removal of ../../acisf12234/products/spectra/fullrun_ccd0_acisf12234_pi14-548_pass1_cl_src1.soff failed
[Thu Jan 19 07:35:47 2012] Keeping rmf generated by specextract
[Thu Jan 19 07:35:47 2012] 167.264
[Thu Jan 19 08:15:57 2012] Updating aperture counts using extracted products
[Thu Jan 19 08:15:57 2012] Error reading totcts from fullrun_ccd0_acisf12234_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Jan 19 08:15:57 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 08:15:57 2012] Using photon index=1.80, rate=0.00329, arf fullrun_ccd0_acisf12234_pi14-548_pass1_cl_src1.arf
[Thu Jan 19 08:15:57 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 08:15:57 2012] Updating source flux to 4.8e-14
[Thu Jan 19 08:16:14 2012] Reading fit data from acisf12234/analysis//spectral/fullrun_ccd0_acisf12234_pi14-548_pass1_cl_src1_pl.csv
[Thu Jan 19 08:16:14 2012] Spectral fit parameter nH value = 1.07556e+13
[Thu Jan 19 08:16:14 2012] Spectral fit parameter PhoIndex value = 1.91253
[Thu Jan 19 08:16:14 2012] Failed to get F(0.3-8.0) from acisf12234/analysis//spectral/fullrun_ccd0_acisf12234_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jan 19 08:16:14 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 08:16:14 2012] Using Nh = 1.1e+13, photon index=1.91, rate=0.00329, arf fullrun_ccd0_acisf12234_pi14-548_pass1_cl_src1.arf
[Thu Jan 19 08:16:14 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 08:16:14 2012] Updating source flux to 4.8e-14