[Wed Feb 29 00:06:06 2012] Detection parameters:
  Position = (313.4, 847.7) = 3 32 37.74 -27 52 12.6
  Extent = 1.1" x 0.5", rotation angle = 2 degrees
  Source counts = 38.1 +/- 6.3
  Background counts = 1.9
  Rate = 0.001 +/- 0.0002

[Wed Feb 29 00:06:07 2012] Off-axis axis estimate = 4.77'
[Wed Feb 29 01:00:50 2012] Using EEF radius (= 1.09 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 01:00:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 29 01:00:50 2012] Initial guess for spatial extent in simple fitting = 1.09"
[Wed Feb 29 01:00:50 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.848
[Wed Feb 29 01:00:50 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 1.09"
[Wed Feb 29 01:12:08 2012] fullrun_ccd3_acisf12232_pi14-548_cl_pass0_src1.ximg exists
[Wed Feb 29 01:12:08 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12232_pi14-548_cl_pass0_src1.csv
[Wed Feb 29 01:12:08 2012] fullrun_ccd3_acisf12232_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Feb 29 01:12:08 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12232_pi14-548_cl_pass0_src1.csv
[Wed Feb 29 01:12:08 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12232_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12232_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 01:12:08 2012] fullrun_ccd3_acisf12232_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Feb 29 01:12:08 2012] fullrun_ccd3_acisf12232_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Feb 29 01:12:08 2012] Fit fullrun_ccd3_acisf12232_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Feb 29 01:19:57 2012] Spatial fit model total counts = 43.103500, observed total counts = 43.000000
[Wed Feb 29 01:19:57 2012] Offset between fit and detection position for source 2 = 0.879786 pixels
[Wed Feb 29 01:19:57 2012] 43.809500 total counts/ 13.987400 bgd. counts: snr = 7.973881
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.879786 pixels
  Position = (314.1, 848.2) = 3 32 37.73 -27 52 12.6
  Extent = 0.7 (0.5-1.3)", rotation angle = 0
  Source counts = 29.8 +/- 6.6
  Background counts = 14.0
  Rate = 0.0009 +/- 0.0002
[Wed Feb 29 01:19:57 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 01:19:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 01:19:57 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 01:19:57 2012] Source does appear to be extended
[Wed Feb 29 01:19:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 02:07:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 29 02:07:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 29 02:07:17 2012] Initial guess for spatial extent in simple fitting = 0.67"
[Wed Feb 29 02:07:17 2012] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.143
[Wed Feb 29 02:07:17 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.67"
[Wed Feb 29 02:18:12 2012] fullrun_ccd3_acisf12232_pi14-548_cl_pass1_src1.ximg exists
[Wed Feb 29 02:18:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12232_pi14-548_cl_pass1_src1.csv
[Wed Feb 29 02:18:12 2012] fullrun_ccd3_acisf12232_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Feb 29 02:18:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12232_pi14-548_cl_pass1_src1.csv
[Wed Feb 29 02:18:12 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12232_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12232_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 02:18:12 2012] fullrun_ccd3_acisf12232_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Feb 29 02:18:12 2012] fullrun_ccd3_acisf12232_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Feb 29 02:18:12 2012] Fit fullrun_ccd3_acisf12232_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Feb 29 02:28:22 2012] Spatial fit model total counts = 42.192600, observed total counts = 42.000000
[Wed Feb 29 02:28:22 2012] Offset between fit and detection position for source 2 = 0.061462 pixels
[Wed Feb 29 02:28:22 2012] 42.628000 total counts/ 13.110700 bgd. counts: snr = 8.151991
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.061462 pixels
  Position = (314.1, 848.2) = 3 32 37.73 -27 52 12.6
  Extent = 0.7 (0.5-1.2)", rotation angle = 0
  Source counts = 29.5 +/- 6.5
  Background counts = 13.1
  Rate = 0.0009 +/- 0.0002
[Wed Feb 29 02:28:22 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 02:28:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 02:28:22 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 02:28:22 2012] Source does appear to be extended
[Wed Feb 29 02:28:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 03:03:31 2012] Writing source region out to fullrun_ccd3_acisf12232_pi14-548_pass1_cl_src2_src.reg
[Wed Feb 29 03:03:31 2012] Extracting stamp from image fullrun_ccd3_acisf12232_pi14-548_cl_sm2.00.img.gz, (284, 818) - (344, 879)
[Wed Feb 29 03:03:31 2012] Writing fullrun_ccd3_acisf12232_pi14-548_pass1_cl_src2.gif
[Wed Feb 29 03:03:33 2012] Size of ../../acisf12232/products/events/fullrun_ccd3_acisf12232_pi14-548_pass1_cl_src2_src.evt.gz[events] = 34 counts
[Wed Feb 29 03:03:33 2012] Mean chipx,y = (933.91, 437.68)
[Wed Feb 29 03:03:33 2012] Mean tdetx,y = (4694.32, 3994.91)
[Wed Feb 29 03:03:33 2012] chipx,y range = (917.00-951.00, 418.00-457.00)
[Wed Feb 29 03:03:33 2012] Size of ../../acisf12232/products/events/fullrun_ccd3_acisf12232_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 18 counts
[Wed Feb 29 03:03:34 2012] Not generating rmf since there are only 29 counts
[Wed Feb 29 03:03:34 2012] arf not found, will run specextract
[Wed Feb 29 03:03:58 2012] ../../acisf12232/products/spectra/fullrun_ccd3_acisf12232_pi14-548_pass1_cl_src2.warf not found
[Wed Feb 29 03:03:58 2012] ../../acisf12232/products/spectra/fullrun_ccd3_acisf12232_pi14-548_pass1_cl_src2.wrmf not found
[Wed Feb 29 03:03:58 2012] Removal of ../../acisf12232/products/spectra/fullrun_ccd3_acisf12232_pi14-548_pass1_cl_src2.soff failed
[Wed Feb 29 03:11:40 2012] Spectrum 2 has only 30 counts, deleting rmf
[Wed Feb 29 03:11:40 2012] 190.671
[Wed Feb 29 03:12:29 2012] Updating aperture counts using extracted products
[Wed Feb 29 03:12:29 2012] Error reading totcts from fullrun_ccd3_acisf12232_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Feb 29 03:12:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 29 03:12:29 2012] Using photon index=1.80, rate=0.000897, arf fullrun_ccd3_acisf12232_pi14-548_pass1_cl_src2.arf
[Wed Feb 29 03:12:29 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 29 03:12:29 2012] Updating source flux to 1.1e-14
[Wed Feb 29 03:12:48 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Feb 29 03:12:49 2012] acisf12232/analysis//spectral/fullrun_ccd3_acisf12232_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete