[Wed Feb 29 00:06:04 2012] Detection parameters:
  Position = (981.2, 640.2) = 3 31 52.51 -27 46 40.0
  Extent = 1.7" x 1.0", rotation angle = 118 degrees
  Source counts = 12.4 +/- 3.9
  Background counts = 2.6
  Rate = 0.0004 +/- 0.0001

[Wed Feb 29 00:06:05 2012] Off-axis axis estimate = 7.78'
[Wed Feb 29 00:46:32 2012] Using EEF radius (= 2.68 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 00:46:32 2012] Initial guess for spatial extent in simple fitting = 2.68"
[Wed Feb 29 00:46:32 2012] source mask rpix=5.5, npix_max = 141, mask sum = 144, frac = 1.017
[Wed Feb 29 00:46:32 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 2.68"
[Wed Feb 29 01:00:50 2012] fullrun_ccd2_acisf12232_pi14-548_cl_pass0_src10.ximg exists
[Wed Feb 29 01:00:50 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf12232_pi14-548_cl_pass0_src10.csv
[Wed Feb 29 01:00:50 2012] fullrun_ccd2_acisf12232_pi14-548_cl_pass0_src10_1.ximg exists
[Wed Feb 29 01:00:50 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf12232_pi14-548_cl_pass0_src10.csv
[Wed Feb 29 01:00:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12232_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12232_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 01:00:50 2012] fullrun_ccd2_acisf12232_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Wed Feb 29 01:00:50 2012] fullrun_ccd2_acisf12232_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Feb 29 01:00:50 2012] Fit fullrun_ccd2_acisf12232_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Feb 29 01:19:56 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 31.494380 pixels away
[Wed Feb 29 01:19:56 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 01:19:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 01:19:56 2012] Assessing source extent using major
[Wed Feb 29 01:19:56 2012] Source does appear to be extended
[Wed Feb 29 01:19:56 2012] Computing asymmetry using major and minor axis, asym = 1.62
[Wed Feb 29 01:19:56 2012] Source is asymmetric
[Wed Feb 29 01:53:05 2012] Using EEF radius (= 2.68 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 01:53:05 2012] Initial guess for spatial extent in simple fitting = 2.68"
[Wed Feb 29 01:53:05 2012] source mask rpix=5.5, npix_max = 141, mask sum = 144, frac = 1.017
[Wed Feb 29 01:53:05 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 2.68"
[Wed Feb 29 02:07:16 2012] fullrun_ccd2_acisf12232_pi14-548_cl_pass1_src10.ximg exists
[Wed Feb 29 02:07:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12232_pi14-548_cl_pass1_src10.csv
[Wed Feb 29 02:07:16 2012] fullrun_ccd2_acisf12232_pi14-548_cl_pass1_src10_1.ximg exists
[Wed Feb 29 02:07:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12232_pi14-548_cl_pass1_src10.csv
[Wed Feb 29 02:07:16 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12232_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12232_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 02:07:17 2012] fullrun_ccd2_acisf12232_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Wed Feb 29 02:07:17 2012] fullrun_ccd2_acisf12232_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Feb 29 02:07:17 2012] Fit fullrun_ccd2_acisf12232_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Feb 29 02:28:21 2012] Spatial fit model total counts = 23.657000, observed total counts = 24.000000
[Wed Feb 29 02:28:21 2012] Offset between fit and detection position for source 7 = 1.880556 pixels
[Wed Feb 29 02:28:21 2012] 23.684300 total counts/ 11.933700 bgd. counts: snr = 3.401516
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 1.880556 pixels
  Position = (983.0, 640.0) = 3 31 52.46 -27 46 40.3
  Extent = 1.6 (0.7-2.5)", rotation angle = 0
  Source counts = 11.8 +/- 4.9
  Background counts = 11.9
  Rate = 0.0004 +/- 0.0001
[Wed Feb 29 02:28:21 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 02:28:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 02:28:21 2012] Assessing source extent using major axis lower bound
[Wed Feb 29 02:28:21 2012] Source does appear to be extended
[Wed Feb 29 02:28:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 29 02:48:10 2012] Writing source region out to fullrun_ccd2_acisf12232_pi14-548_pass1_cl_src7_src.reg
[Wed Feb 29 02:48:10 2012] Extracting stamp from image fullrun_ccd2_acisf12232_pi14-548_cl_sm2.00.img.gz, (910, 566) - (1057, 714)
[Wed Feb 29 02:48:10 2012] Writing fullrun_ccd2_acisf12232_pi14-548_pass1_cl_src7.gif
[Wed Feb 29 02:52:43 2012] Size of ../../acisf12232/products/events/fullrun_ccd2_acisf12232_pi14-548_pass1_cl_src7_src.evt.gz[events] = 21 counts
[Wed Feb 29 02:52:43 2012] Mean chipx,y = (790.10, 420.38)
[Wed Feb 29 02:52:43 2012] Mean tdetx,y = (3481.38, 3295.90)
[Wed Feb 29 02:52:43 2012] chipx,y range = (764.00-808.00, 400.00-442.00)
[Wed Feb 29 02:52:43 2012] Size of ../../acisf12232/products/events/fullrun_ccd2_acisf12232_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 51 counts
[Wed Feb 29 02:52:44 2012] Not generating rmf since there are only 11 counts
[Wed Feb 29 02:52:44 2012] arf not found, will run specextract
[Wed Feb 29 02:53:07 2012] ../../acisf12232/products/spectra/fullrun_ccd2_acisf12232_pi14-548_pass1_cl_src7.warf not found
[Wed Feb 29 02:53:07 2012] ../../acisf12232/products/spectra/fullrun_ccd2_acisf12232_pi14-548_pass1_cl_src7.wrmf not found
[Wed Feb 29 02:53:07 2012] Removal of ../../acisf12232/products/spectra/fullrun_ccd2_acisf12232_pi14-548_pass1_cl_src7.soff failed
[Wed Feb 29 03:03:31 2012] Spectrum 7 has only 12 counts, deleting rmf
[Wed Feb 29 03:03:31 2012] 164.899
[Wed Feb 29 03:12:29 2012] Updating aperture counts using extracted products
[Wed Feb 29 03:12:29 2012] Error reading totcts from fullrun_ccd2_acisf12232_pi14-548_pass1_cl_src7_src.pi.gz
[Wed Feb 29 03:12:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 29 03:12:29 2012] Using photon index=1.80, rate=0.000357, arf fullrun_ccd2_acisf12232_pi14-548_pass1_cl_src7.arf
[Wed Feb 29 03:12:29 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 29 03:12:29 2012] Updating source flux to 5.2e-15
[Wed Feb 29 03:12:42 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting