[Wed Feb 29 00:05:58 2012] Detection parameters:
  Position = (1126.1, 674.2) = 3 32 20.25 -27 41 51.9
  Extent = 1.3" x 0.5", rotation angle = 8 degrees
  Source counts = 10.1 +/- 3.5
  Background counts = 1.9
  Rate = 0.0003 +/- 0.0001

[Wed Feb 29 00:05:59 2012] Off-axis axis estimate = 6.38'
[Wed Feb 29 00:08:01 2012] Using EEF radius (= 1.83 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 00:08:01 2012] Initial guess for spatial extent in simple fitting = 1.83"
[Wed Feb 29 00:08:01 2012] source mask rpix=3.7, npix_max = 70, mask sum = 64, frac = 0.902
[Wed Feb 29 00:08:01 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 1.83"
[Wed Feb 29 00:30:46 2012] fullrun_ccd0_acisf12232_pi14-548_cl_pass0_src10.ximg exists
[Wed Feb 29 00:30:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12232_pi14-548_cl_pass0_src10.csv
[Wed Feb 29 00:30:46 2012] fullrun_ccd0_acisf12232_pi14-548_cl_pass0_src10_1.ximg exists
[Wed Feb 29 00:30:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12232_pi14-548_cl_pass0_src10.csv
[Wed Feb 29 00:30:46 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12232_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12232_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 00:30:46 2012] fullrun_ccd0_acisf12232_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Wed Feb 29 00:30:46 2012] fullrun_ccd0_acisf12232_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Feb 29 00:30:46 2012] Fit fullrun_ccd0_acisf12232_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Feb 29 01:19:54 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 20.105223 pixels away
[Wed Feb 29 01:19:54 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 01:19:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 01:19:54 2012] Assessing source extent using major
[Wed Feb 29 01:19:54 2012] Source does appear to be extended
[Wed Feb 29 01:19:54 2012] Computing asymmetry using major and minor axis, asym = 2.34
[Wed Feb 29 01:19:54 2012] Source is asymmetric
[Wed Feb 29 01:20:17 2012] Using EEF radius (= 1.83 ")to estimate initial spatial extent for simple fitting
[Wed Feb 29 01:20:17 2012] Initial guess for spatial extent in simple fitting = 1.83"
[Wed Feb 29 01:20:17 2012] source mask rpix=3.7, npix_max = 70, mask sum = 64, frac = 0.902
[Wed Feb 29 01:20:17 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 1.83"
[Wed Feb 29 01:38:51 2012] fullrun_ccd0_acisf12232_pi14-548_cl_pass1_src10.ximg exists
[Wed Feb 29 01:38:51 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf12232_pi14-548_cl_pass1_src10.csv
[Wed Feb 29 01:38:51 2012] fullrun_ccd0_acisf12232_pi14-548_cl_pass1_src10_1.ximg exists
[Wed Feb 29 01:38:51 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd0_acisf12232_pi14-548_cl_pass1_src10.csv
[Wed Feb 29 01:38:51 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12232_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12232_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 29 01:38:51 2012] fullrun_ccd0_acisf12232_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Wed Feb 29 01:38:51 2012] fullrun_ccd0_acisf12232_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Feb 29 01:38:51 2012] Fit fullrun_ccd0_acisf12232_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Feb 29 02:28:18 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 19.314543 pixels away
[Wed Feb 29 02:28:18 2012] Vigneting correction estimate = 1.000000
[Wed Feb 29 02:28:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 29 02:28:18 2012] Assessing source extent using major
[Wed Feb 29 02:28:18 2012] Source does appear to be extended
[Wed Feb 29 02:28:18 2012] Computing asymmetry using major and minor axis, asym = 2.34
[Wed Feb 29 02:28:18 2012] Source is asymmetric
[Wed Feb 29 02:28:41 2012] Writing source region out to fullrun_ccd0_acisf12232_pi14-548_pass1_cl_src13_src.reg
[Wed Feb 29 02:28:41 2012] Extracting stamp from image fullrun_ccd0_acisf12232_pi14-548_cl_sm2.00.img.gz, (1068, 616) - (1184, 733)
[Wed Feb 29 02:28:41 2012] Writing fullrun_ccd0_acisf12232_pi14-548_pass1_cl_src13.gif
[Wed Feb 29 02:34:16 2012] Size of ../../acisf12232/products/events/fullrun_ccd0_acisf12232_pi14-548_pass1_cl_src13_src.evt.gz[events] = 12 counts
[Wed Feb 29 02:34:16 2012] Mean chipx,y = (902.00, 306.58)
[Wed Feb 29 02:34:16 2012] Mean tdetx,y = (3367.58, 4230.00)
[Wed Feb 29 02:34:16 2012] chipx,y range = (878.00-907.00, 297.00-323.00)
[Wed Feb 29 02:34:16 2012] Size of ../../acisf12232/products/events/fullrun_ccd0_acisf12232_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 43 counts
[Wed Feb 29 02:34:18 2012] Not generating rmf since there are only 10 counts
[Wed Feb 29 02:34:18 2012] arf not found, will run specextract
[Wed Feb 29 02:34:37 2012] ../../acisf12232/products/spectra/fullrun_ccd0_acisf12232_pi14-548_pass1_cl_src13.warf not found
[Wed Feb 29 02:34:37 2012] ../../acisf12232/products/spectra/fullrun_ccd0_acisf12232_pi14-548_pass1_cl_src13.wrmf not found
[Wed Feb 29 02:34:37 2012] Removal of ../../acisf12232/products/spectra/fullrun_ccd0_acisf12232_pi14-548_pass1_cl_src13.soff failed
[Wed Feb 29 02:40:02 2012] Spectrum 13 has only 10 counts, deleting rmf
[Wed Feb 29 02:40:02 2012] 177.79
[Wed Feb 29 03:12:28 2012] Updating aperture counts using extracted products
[Wed Feb 29 03:12:28 2012] Error reading totcts from fullrun_ccd0_acisf12232_pi14-548_pass1_cl_src13_src.pi.gz
[Wed Feb 29 03:12:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 29 03:12:28 2012] Using photon index=1.80, rate=0.000307, arf fullrun_ccd0_acisf12232_pi14-548_pass1_cl_src13.arf
[Wed Feb 29 03:12:28 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 29 03:12:28 2012] Updating source flux to 4.2e-15
[Wed Feb 29 03:12:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting