[Wed Jan 18 22:15:34 2012] Detection parameters:
  Position = (924.9, 772.1) = 3 32 27.00 -27 41 5.6
  Extent = 2.0" x 1.5", rotation angle = 137 degrees
  Source counts = 158.8 +/- 13.0
  Background counts = 11.2
  Rate = 0.006 +/- 0.0005

[Wed Jan 18 22:15:35 2012] Off-axis axis estimate = 6.96'
[Wed Jan 18 22:17:28 2012] Using EEF radius (= 2.16 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 22:17:28 2012] Initial guess for spatial extent in simple fitting = 2.16"
[Wed Jan 18 22:17:28 2012] source mask rpix=4.4, npix_max = 95, mask sum = 100, frac = 1.048
[Wed Jan 18 22:17:28 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 2.16"
[Wed Jan 18 22:35:35 2012] fullrun_ccd0_acisf12231_pi14-548_cl_pass0_src3.ximg exists
[Wed Jan 18 22:35:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12231_pi14-548_cl_pass0_src3.csv
[Wed Jan 18 22:35:35 2012] fullrun_ccd0_acisf12231_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Jan 18 22:35:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12231_pi14-548_cl_pass0_src3.csv
[Wed Jan 18 22:35:35 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12231_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12231_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 22:35:35 2012] fullrun_ccd0_acisf12231_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Jan 18 22:35:35 2012] fullrun_ccd0_acisf12231_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jan 18 22:35:35 2012] Fit fullrun_ccd0_acisf12231_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jan 18 23:04:23 2012] Spatial fit model total counts = 169.204000, observed total counts = 170.000000
[Wed Jan 18 23:04:23 2012] Offset between fit and detection position for source 3 = 1.011346 pixels
[Wed Jan 18 23:04:23 2012] 168.222300 total counts/ 20.090300 bgd. counts: snr = 33.048799
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.011346 pixels
  Position = (925.7, 772.8) = 3 32 26.99 -27 41 5.5
  Extent = 2.1 (1.7-2.5)", rotation angle = 0
  Source counts = 148.1 +/- 13.0
  Background counts = 20.1
  Rate = 0.006 +/- 0.0005
[Wed Jan 18 23:04:23 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 23:04:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 23:04:23 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 23:04:23 2012] Source does appear to be extended
[Wed Jan 18 23:04:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 23:04:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 18 23:04:39 2012] Initial guess for spatial extent in simple fitting = 2.06"
[Wed Jan 18 23:04:39 2012] source mask rpix=4.2, npix_max = 88, mask sum = 81, frac = 0.920
[Wed Jan 18 23:04:39 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 2.06"
[Wed Jan 18 23:28:11 2012] fullrun_ccd0_acisf12231_pi14-548_cl_pass1_src3.ximg exists
[Wed Jan 18 23:28:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12231_pi14-548_cl_pass1_src3.csv
[Wed Jan 18 23:28:11 2012] fullrun_ccd0_acisf12231_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Jan 18 23:28:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12231_pi14-548_cl_pass1_src3.csv
[Wed Jan 18 23:28:11 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12231_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12231_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 23:28:11 2012] fullrun_ccd0_acisf12231_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Jan 18 23:28:11 2012] fullrun_ccd0_acisf12231_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jan 18 23:28:11 2012] Fit fullrun_ccd0_acisf12231_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Jan 18 23:52:15 2012] Spatial fit model total counts = 167.451000, observed total counts = 168.000000
[Wed Jan 18 23:52:15 2012] Offset between fit and detection position for source 3 = 0.150391 pixels
[Wed Jan 18 23:52:15 2012] 165.845900 total counts/ 29.090900 bgd. counts: snr = 25.355060
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.150391 pixels
  Position = (925.7, 772.9) = 3 32 26.99 -27 41 5.5
  Extent = 1.9 (1.6-2.3)", rotation angle = 0
  Source counts = 136.8 +/- 12.9
  Background counts = 29.1
  Rate = 0.006 +/- 0.0005
[Wed Jan 18 23:52:15 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 23:52:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 23:52:15 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 23:52:15 2012] Source does appear to be extended
[Wed Jan 18 23:52:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 23:52:31 2012] Writing source region out to fullrun_ccd0_acisf12231_pi14-548_pass1_cl_src3_src.reg
[Wed Jan 18 23:52:31 2012] Extracting stamp from image fullrun_ccd0_acisf12231_pi14-548_cl_sm2.00.img.gz, (838, 685) - (1014, 861)
[Wed Jan 18 23:52:31 2012] Writing fullrun_ccd0_acisf12231_pi14-548_pass1_cl_src3.gif
[Wed Jan 18 23:53:36 2012] Size of ../../acisf12231/products/events/fullrun_ccd0_acisf12231_pi14-548_pass1_cl_src3_src.evt.gz[events] = 170 counts
[Wed Jan 18 23:53:36 2012] Mean chipx,y = (684.92, 312.22)
[Wed Jan 18 23:53:36 2012] Mean tdetx,y = (3373.22, 4447.08)
[Wed Jan 18 23:53:36 2012] chipx,y range = (656.00-710.00, 290.00-338.00)
[Wed Jan 18 23:53:36 2012] Size of ../../acisf12231/products/events/fullrun_ccd0_acisf12231_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 91 counts
[Wed Jan 18 23:53:37 2012] rmf not found, will run specextract
[Wed Jan 18 23:53:37 2012] arf not found, will run specextract
[Wed Jan 18 23:53:58 2012] ../../acisf12231/products/spectra/fullrun_ccd0_acisf12231_pi14-548_pass1_cl_src3.warf not found
[Wed Jan 18 23:53:58 2012] ../../acisf12231/products/spectra/fullrun_ccd0_acisf12231_pi14-548_pass1_cl_src3.wrmf not found
[Wed Jan 18 23:53:58 2012] Removal of ../../acisf12231/products/spectra/fullrun_ccd0_acisf12231_pi14-548_pass1_cl_src3.soff failed
[Wed Jan 18 23:59:08 2012] Keeping rmf generated by specextract
[Wed Jan 18 23:59:08 2012] 175.105
[Thu Jan 19 00:18:58 2012] Updating aperture counts using extracted products
[Thu Jan 19 00:18:58 2012] Error reading totcts from fullrun_ccd0_acisf12231_pi14-548_pass1_cl_src3_src.pi.gz
[Thu Jan 19 00:18:58 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 00:18:58 2012] Using photon index=1.80, rate=0.00553, arf fullrun_ccd0_acisf12231_pi14-548_pass1_cl_src3.arf
[Thu Jan 19 00:18:58 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 00:18:58 2012] Updating source flux to 7.6e-14
[Thu Jan 19 00:19:06 2012] Reading fit data from acisf12231/analysis//spectral/fullrun_ccd0_acisf12231_pi14-548_pass1_cl_src3_pl.csv
[Thu Jan 19 00:19:06 2012] Spectral fit parameter nH value = 5.18746e+14
[Thu Jan 19 00:19:06 2012] Spectral fit parameter PhoIndex value = 1.94522
[Thu Jan 19 00:19:06 2012] Failed to get F(0.3-8.0) from acisf12231/analysis//spectral/fullrun_ccd0_acisf12231_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Thu Jan 19 00:19:06 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jan 19 00:19:06 2012] Using Nh = 5.2e+14, photon index=1.95, rate=0.00553, arf fullrun_ccd0_acisf12231_pi14-548_pass1_cl_src3.arf
[Thu Jan 19 00:19:06 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Jan 19 00:19:06 2012] Updating source flux to 7.6e-14