[Tue Jan 17 15:35:37 2012] Detection parameters:
  Position = (523.4, 929.8) = 3 32 32.77 -27 51 51.2
  Extent = 0.8" x 0.7", rotation angle = 9 degrees
  Source counts = 14.9 +/- 4.0
  Background counts = 1.1
  Rate = 0.0004 +/- 0.0001

[Tue Jan 17 15:35:38 2012] Off-axis axis estimate = 3.97'
[Tue Jan 17 16:15:08 2012] Using EEF radius (= 0.82 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 16:15:08 2012] Initial guess for spatial extent in simple fitting = 0.82"
[Tue Jan 17 16:15:08 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.064
[Tue Jan 17 16:15:08 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 0.82"
[Tue Jan 17 16:21:33 2012] fullrun_ccd3_acisf12230_pi14-548_cl_pass0_src3.ximg exists
[Tue Jan 17 16:21:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12230_pi14-548_cl_pass0_src3.csv
[Tue Jan 17 16:21:33 2012] fullrun_ccd3_acisf12230_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Jan 17 16:21:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12230_pi14-548_cl_pass0_src3.csv
[Tue Jan 17 16:21:33 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12230_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12230_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 16:21:33 2012] fullrun_ccd3_acisf12230_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Jan 17 16:21:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12230_pi14-548_cl_pass0_tfrozen_src3.csv
[Tue Jan 17 16:21:33 2012] fullrun_ccd3_acisf12230_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jan 17 16:21:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12230_pi14-548_cl_pass0_tfrozen_src3.csv
[Tue Jan 17 16:21:33 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12230_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12230_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 16:30:05 2012] Spatial fit model total counts = 15.623700, observed total counts = 17.000000
[Tue Jan 17 16:30:05 2012] Offset between fit and detection position for source 4 = 0.753042 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.753042 pixels
  Position = (523.9, 930.4) = 3 32 32.77 -27 51 51.1
  Extent = 1.0 (0.8-1.3)", rotation angle = 0
  Source counts = 15.2 +/- 3.9
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Tue Jan 17 16:30:05 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 16:30:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 16:30:05 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 16:30:05 2012] Source does appear to be extended
[Tue Jan 17 16:30:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 17:09:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 17:09:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 17:09:43 2012] Initial guess for spatial extent in simple fitting = 1.05"
[Tue Jan 17 17:09:43 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.088
[Tue Jan 17 17:09:43 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 1.05"
[Tue Jan 17 17:16:02 2012] fullrun_ccd3_acisf12230_pi14-548_cl_pass1_src3.ximg exists
[Tue Jan 17 17:16:02 2012] fullrun_ccd3_acisf12230_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Jan 17 17:16:02 2012] Fit fullrun_ccd3_acisf12230_pi14-548_cl_pass1_src3 appears to have run properly
[Tue Jan 17 17:16:02 2012] fullrun_ccd3_acisf12230_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Jan 17 17:16:02 2012] fullrun_ccd3_acisf12230_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jan 17 17:16:02 2012] Fit fullrun_ccd3_acisf12230_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jan 17 17:24:00 2012] Spatial fit model total counts = 15.643400, observed total counts = 16.000000
[Tue Jan 17 17:24:00 2012] Offset between fit and detection position for source 4 = 0.043919 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.043919 pixels
  Position = (524.0, 930.4) = 3 32 32.77 -27 51 51.1
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 15.7 +/- 4.0
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Tue Jan 17 17:24:00 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 17:24:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 17:24:00 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 17:24:00 2012] Source does appear to be extended
[Tue Jan 17 17:24:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 17:50:10 2012] Writing source region out to fullrun_ccd3_acisf12230_pi14-548_pass1_cl_src4_src.reg
[Tue Jan 17 17:50:10 2012] Extracting stamp from image fullrun_ccd3_acisf12230_pi14-548_cl_sm2.00.img.gz, (479, 886) - (569, 975)
[Tue Jan 17 17:50:10 2012] Writing fullrun_ccd3_acisf12230_pi14-548_pass1_cl_src4.gif
[Tue Jan 17 17:51:22 2012] Size of ../../acisf12230/products/events/fullrun_ccd3_acisf12230_pi14-548_pass1_cl_src4_src.evt.gz[events] = 16 counts
[Tue Jan 17 17:51:22 2012] Mean chipx,y = (798.94, 565.44)
[Tue Jan 17 17:51:22 2012] Mean tdetx,y = (4566.56, 3859.94)
[Tue Jan 17 17:51:22 2012] chipx,y range = (781.00-816.00, 548.00-587.00)
[Tue Jan 17 17:51:22 2012] Size of ../../acisf12230/products/events/fullrun_ccd3_acisf12230_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 30 counts
[Tue Jan 17 17:51:23 2012] Not generating rmf since there are only 15 counts
[Tue Jan 17 17:51:23 2012] arf not found, will run specextract
[Tue Jan 17 17:51:48 2012] ../../acisf12230/products/spectra/fullrun_ccd3_acisf12230_pi14-548_pass1_cl_src4.warf not found
[Tue Jan 17 17:51:48 2012] ../../acisf12230/products/spectra/fullrun_ccd3_acisf12230_pi14-548_pass1_cl_src4.wrmf not found
[Tue Jan 17 17:51:48 2012] Removal of ../../acisf12230/products/spectra/fullrun_ccd3_acisf12230_pi14-548_pass1_cl_src4.soff failed
[Tue Jan 17 18:00:44 2012] Spectrum 4 has only 16 counts, deleting rmf
[Tue Jan 17 18:00:44 2012] 192.849
[Tue Jan 17 18:01:29 2012] Updating aperture counts using extracted products
[Tue Jan 17 18:01:29 2012] Error reading totcts from fullrun_ccd3_acisf12230_pi14-548_pass1_cl_src4_src.pi.gz
[Tue Jan 17 18:01:29 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 18:01:29 2012] Using photon index=1.80, rate=0.000463, arf fullrun_ccd3_acisf12230_pi14-548_pass1_cl_src4.arf
[Tue Jan 17 18:01:29 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 18:01:29 2012] Updating source flux to 5.8e-15
[Tue Jan 17 18:01:43 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jan 17 18:01:44 2012] acisf12230/analysis//spectral/fullrun_ccd3_acisf12230_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete