[Tue Jan 17 15:35:37 2012] Detection parameters:
  Position = (278.8, 906.7) = 3 32 41.84 -27 52 2.5
  Extent = 0.6" x 0.5", rotation angle = 162 degrees
  Source counts = 11.4 +/- 3.5
  Background counts = 0.6
  Rate = 0.0003 +/- 0.0001

[Tue Jan 17 15:35:38 2012] Off-axis axis estimate = 5.13'
[Tue Jan 17 16:15:08 2012] Using EEF radius (= 1.23 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 16:15:08 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 16:15:08 2012] Initial guess for spatial extent in simple fitting = 1.23"
[Tue Jan 17 16:15:08 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.995
[Tue Jan 17 16:15:08 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 1.23"
[Tue Jan 17 16:21:33 2012] fullrun_ccd3_acisf12230_pi14-548_cl_pass0_src6.ximg exists
[Tue Jan 17 16:21:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12230_pi14-548_cl_pass0_src6.csv
[Tue Jan 17 16:21:33 2012] fullrun_ccd3_acisf12230_pi14-548_cl_pass0_src6_1.ximg exists
[Tue Jan 17 16:21:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12230_pi14-548_cl_pass0_src6.csv
[Tue Jan 17 16:21:33 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12230_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12230_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 16:21:33 2012] fullrun_ccd3_acisf12230_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Tue Jan 17 16:21:33 2012] fullrun_ccd3_acisf12230_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Jan 17 16:21:33 2012] Fit fullrun_ccd3_acisf12230_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Tue Jan 17 16:30:05 2012] Spatial fit model total counts = 17.794500, observed total counts = 19.000000
[Tue Jan 17 16:30:05 2012] Offset between fit and detection position for source 3 = 0.767962 pixels
[Tue Jan 17 16:30:05 2012] 17.383090 total counts/ 8.079990 bgd. counts: snr = 3.272821
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.767962 pixels
  Position = (279.6, 906.7) = 3 32 41.83 -27 52 2.8
  Extent = 0.8" x 0.3", rotation angle = 356
  Source counts = 9.3 +/- 4.2
  Background counts = 8.1
  Rate = 0.0003 +/- 0.0001
[Tue Jan 17 16:30:05 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 16:30:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 16:30:05 2012] Assessing source extent using major
[Tue Jan 17 16:30:05 2012] Source does appear to be extended
[Tue Jan 17 16:30:05 2012] Computing asymmetry using major and minor axis, asym = 2.61
[Tue Jan 17 16:30:05 2012] Source is asymmetric
[Tue Jan 17 17:09:43 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 17:09:43 2012] Initial guess for spatial extent in simple fitting = 0.56"
[Tue Jan 17 17:09:43 2012] Spatial fitting skipped for pass 1: source                                 has 9.3 net counts, is at off-axis angle 5.1'
[Tue Jan 17 17:24:00 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 17:24:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 17:24:00 2012] Assessing source extent using major
[Tue Jan 17 17:24:00 2012] Source does appear to be extended
[Tue Jan 17 17:24:00 2012] Computing asymmetry using major and minor axis, asym = 2.61
[Tue Jan 17 17:24:00 2012] Source is asymmetric
[Tue Jan 17 17:50:10 2012] Writing source region out to fullrun_ccd3_acisf12230_pi14-548_pass1_cl_src3_src.reg
[Tue Jan 17 17:50:10 2012] Extracting stamp from image fullrun_ccd3_acisf12230_pi14-548_cl_sm2.00.img.gz, (243, 870) - (316, 943)
[Tue Jan 17 17:50:10 2012] Writing fullrun_ccd3_acisf12230_pi14-548_pass1_cl_src3.gif
[Tue Jan 17 17:53:11 2012] Size of ../../acisf12230/products/events/fullrun_ccd3_acisf12230_pi14-548_pass1_cl_src3_src.evt.gz[events] = 11 counts
[Tue Jan 17 17:53:11 2012] Mean chipx,y = (979.73, 397.91)
[Tue Jan 17 17:53:11 2012] Mean tdetx,y = (4734.09, 4040.73)
[Tue Jan 17 17:53:11 2012] chipx,y range = (961.00-996.00, 382.00-419.00)
[Tue Jan 17 17:53:11 2012] Size of ../../acisf12230/products/events/fullrun_ccd3_acisf12230_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 12 counts
[Tue Jan 17 17:53:12 2012] Not generating rmf since there are only 9 counts
[Tue Jan 17 17:53:12 2012] arf not found, will run specextract
[Tue Jan 17 17:53:39 2012] ../../acisf12230/products/spectra/fullrun_ccd3_acisf12230_pi14-548_pass1_cl_src3.warf not found
[Tue Jan 17 17:53:39 2012] ../../acisf12230/products/spectra/fullrun_ccd3_acisf12230_pi14-548_pass1_cl_src3.wrmf not found
[Tue Jan 17 17:53:39 2012] Removal of ../../acisf12230/products/spectra/fullrun_ccd3_acisf12230_pi14-548_pass1_cl_src3.soff failed
[Tue Jan 17 18:00:44 2012] Spectrum 3 has only 9 counts, deleting rmf
[Tue Jan 17 18:00:44 2012] 189.862
[Tue Jan 17 18:01:29 2012] Updating aperture counts using extracted products
[Tue Jan 17 18:01:29 2012] Error reading totcts from fullrun_ccd3_acisf12230_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Jan 17 18:01:29 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 18:01:29 2012] Using photon index=1.80, rate=0.000275, arf fullrun_ccd3_acisf12230_pi14-548_pass1_cl_src3.arf
[Tue Jan 17 18:01:29 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 18:01:29 2012] Updating source flux to 3.5e-15
[Tue Jan 17 18:01:43 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jan 17 18:01:44 2012] acisf12230/analysis//spectral/fullrun_ccd3_acisf12230_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete