[Tue Jan 17 15:35:33 2012] Detection parameters:
  Position = (1071.3, 606.4) = 3 32 43.23 -27 49 14.4
  Extent = 0.6" x 0.5", rotation angle = 122 degrees
  Source counts = 14.2 +/- 3.9
  Background counts = 0.8
  Rate = 0.0004 +/- 0.0001

[Tue Jan 17 15:35:33 2012] Off-axis axis estimate = 3.77'
[Tue Jan 17 15:59:31 2012] Using EEF radius (= 0.76 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 15:59:31 2012] Initial guess for spatial extent in simple fitting = 0.76"
[Tue Jan 17 15:59:31 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.951
[Tue Jan 17 15:59:31 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 0.76"
[Tue Jan 17 16:08:57 2012] fullrun_ccd1_acisf12230_pi14-548_cl_pass0_src5.ximg exists
[Tue Jan 17 16:08:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12230_pi14-548_cl_pass0_src5.csv
[Tue Jan 17 16:08:57 2012] fullrun_ccd1_acisf12230_pi14-548_cl_pass0_src5_1.ximg exists
[Tue Jan 17 16:08:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12230_pi14-548_cl_pass0_src5.csv
[Tue Jan 17 16:08:57 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12230_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12230_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 16:08:57 2012] fullrun_ccd1_acisf12230_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Tue Jan 17 16:08:57 2012] fullrun_ccd1_acisf12230_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Jan 17 16:08:57 2012] Fit fullrun_ccd1_acisf12230_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Jan 17 16:30:03 2012] Spatial fit model total counts = 14.495100, observed total counts = 15.000000
[Tue Jan 17 16:30:03 2012] Offset between fit and detection position for source 12 = 0.816823 pixels
[Tue Jan 17 16:30:03 2012] 14.495600 total counts/ 0.000000 bgd. counts: snr = 236529941.215248
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.816823 pixels
  Position = (1071.8, 607.0) = 3 32 43.23 -27 49 14.3
  Extent = 0.8 (0.6-0.9)", rotation angle = 0
  Source counts = 14.5 +/- 3.8
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Tue Jan 17 16:30:03 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 16:30:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 16:30:03 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 16:30:03 2012] Source does appear to be extended
[Tue Jan 17 16:30:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 16:53:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 16:53:52 2012] Initial guess for spatial extent in simple fitting = 0.77"
[Tue Jan 17 16:53:52 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.941
[Tue Jan 17 16:53:52 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 0.77"
[Tue Jan 17 17:02:47 2012] fullrun_ccd1_acisf12230_pi14-548_cl_pass1_src5.ximg exists
[Tue Jan 17 17:02:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12230_pi14-548_cl_pass1_src5.csv
[Tue Jan 17 17:02:47 2012] fullrun_ccd1_acisf12230_pi14-548_cl_pass1_src5_1.ximg exists
[Tue Jan 17 17:02:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12230_pi14-548_cl_pass1_src5.csv
[Tue Jan 17 17:02:47 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12230_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12230_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 17:02:47 2012] fullrun_ccd1_acisf12230_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Tue Jan 17 17:02:47 2012] fullrun_ccd1_acisf12230_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Jan 17 17:02:47 2012] Fit fullrun_ccd1_acisf12230_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Jan 17 17:23:58 2012] Spatial fit model total counts = 14.713000, observed total counts = 15.000000
[Tue Jan 17 17:23:58 2012] Offset between fit and detection position for source 12 = 0.142334 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.142334 pixels
  Position = (1071.7, 606.9) = 3 32 43.23 -27 49 14.4
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 14.7 +/- 3.8
  Background counts = 0.0
  Rate = 0.0004 +/- 0.0001
[Tue Jan 17 17:23:58 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 17:23:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 17:23:58 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 17:23:58 2012] Source does appear to be extended
[Tue Jan 17 17:23:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 17:34:16 2012] Writing source region out to fullrun_ccd1_acisf12230_pi14-548_pass1_cl_src12_src.reg
[Tue Jan 17 17:34:16 2012] Extracting stamp from image fullrun_ccd1_acisf12230_pi14-548_cl_sm2.00.img.gz, (1038, 573) - (1106, 641)
[Tue Jan 17 17:34:16 2012] Writing fullrun_ccd1_acisf12230_pi14-548_pass1_cl_src12.gif
[Tue Jan 17 17:36:10 2012] Size of ../../acisf12230/products/events/fullrun_ccd1_acisf12230_pi14-548_pass1_cl_src12_src.evt.gz[events] = 15 counts
[Tue Jan 17 17:36:10 2012] Mean chipx,y = (171.73, 654.40)
[Tue Jan 17 17:36:10 2012] Mean tdetx,y = (4477.60, 4278.73)
[Tue Jan 17 17:36:10 2012] chipx,y range = (153.00-188.00, 636.00-670.00)
[Tue Jan 17 17:36:10 2012] Size of ../../acisf12230/products/events/fullrun_ccd1_acisf12230_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 16 counts
[Tue Jan 17 17:36:11 2012] Not generating rmf since there are only 14 counts
[Tue Jan 17 17:36:11 2012] arf not found, will run specextract
[Tue Jan 17 17:36:34 2012] ../../acisf12230/products/spectra/fullrun_ccd1_acisf12230_pi14-548_pass1_cl_src12.warf not found
[Tue Jan 17 17:36:34 2012] ../../acisf12230/products/spectra/fullrun_ccd1_acisf12230_pi14-548_pass1_cl_src12.wrmf not found
[Tue Jan 17 17:36:34 2012] Removal of ../../acisf12230/products/spectra/fullrun_ccd1_acisf12230_pi14-548_pass1_cl_src12.soff failed
[Tue Jan 17 17:38:44 2012] Spectrum 12 has only 15 counts, deleting rmf
[Tue Jan 17 17:38:44 2012] 197.879
[Tue Jan 17 18:01:28 2012] Updating aperture counts using extracted products
[Tue Jan 17 18:01:28 2012] Error reading totcts from fullrun_ccd1_acisf12230_pi14-548_pass1_cl_src12_src.pi.gz
[Tue Jan 17 18:01:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 18:01:28 2012] Using photon index=1.80, rate=0.000435, arf fullrun_ccd1_acisf12230_pi14-548_pass1_cl_src12.arf
[Tue Jan 17 18:01:28 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 18:01:28 2012] Updating source flux to 5.3e-15
[Tue Jan 17 18:01:37 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jan 17 18:01:38 2012] acisf12230/analysis//spectral/fullrun_ccd1_acisf12230_pi14-548_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete