[Tue Jan 17 15:35:29 2012] Detection parameters:
  Position = (576.4, 949.8) = 3 32 38.09 -27 39 46.4
  Extent = 2.7" x 2.1", rotation angle = 108 degrees
  Source counts = 116.0 +/- 11.5
  Background counts = 17.0
  Rate = 0.003 +/- 0.0003

[Tue Jan 17 15:35:31 2012] Off-axis axis estimate = 8.68'
[Tue Jan 17 15:37:30 2012] Using EEF radius (= 3.33 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 15:37:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 15:37:30 2012] Initial guess for spatial extent in simple fitting = 3.33"
[Tue Jan 17 15:37:30 2012] source mask rpix=6.8, npix_max = 210, mask sum = 210, frac = 0.996
[Tue Jan 17 15:37:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.33"
[Tue Jan 17 15:59:31 2012] fullrun_ccd0_acisf12230_pi14-548_cl_pass0_src1.ximg exists
[Tue Jan 17 15:59:31 2012] fullrun_ccd0_acisf12230_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Jan 17 15:59:31 2012] Fit fullrun_ccd0_acisf12230_pi14-548_cl_pass0_src1 appears to have run properly
[Tue Jan 17 15:59:31 2012] fullrun_ccd0_acisf12230_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan 17 15:59:31 2012] fullrun_ccd0_acisf12230_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan 17 15:59:31 2012] Fit fullrun_ccd0_acisf12230_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan 17 16:30:02 2012] Spatial fit model total counts = 166.505000, observed total counts = 162.000000
[Tue Jan 17 16:30:02 2012] Offset between fit and detection position for source 1 = 2.428325 pixels
[Tue Jan 17 16:30:02 2012] 165.944900 total counts/ 41.083900 bgd. counts: snr = 19.480091
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.428325 pixels
  Position = (575.5, 952.1) = 3 32 38.14 -27 39 45.6
  Extent = 3.5" x 2.3", rotation angle = 63
  Source counts = 124.9 +/- 12.9
  Background counts = 41.1
  Rate = 0.004 +/- 0.0004
[Tue Jan 17 16:30:02 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 16:30:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 16:30:02 2012] Assessing source extent using major
[Tue Jan 17 16:30:02 2012] Source does appear to be extended
[Tue Jan 17 16:30:02 2012] Computing asymmetry using major and minor axis, asym = 1.55
[Tue Jan 17 16:30:02 2012] Source is asymmetric
[Tue Jan 17 16:30:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 16:30:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 16:30:20 2012] Initial guess for spatial extent in simple fitting = 2.87"
[Tue Jan 17 16:30:20 2012] source mask rpix=5.8, npix_max = 160, mask sum = 156, frac = 0.969
[Tue Jan 17 16:30:20 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 2.87"
[Tue Jan 17 16:53:52 2012] fullrun_ccd0_acisf12230_pi14-548_cl_pass1_src1.ximg exists
[Tue Jan 17 16:53:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12230_pi14-548_cl_pass1_src1.csv
[Tue Jan 17 16:53:52 2012] fullrun_ccd0_acisf12230_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Jan 17 16:53:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12230_pi14-548_cl_pass1_src1.csv
[Tue Jan 17 16:53:52 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12230_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12230_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 16:53:52 2012] fullrun_ccd0_acisf12230_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan 17 16:53:52 2012] fullrun_ccd0_acisf12230_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan 17 16:53:52 2012] Fit fullrun_ccd0_acisf12230_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan 17 17:23:57 2012] Spatial fit model total counts = 154.988000, observed total counts = 155.000000
[Tue Jan 17 17:23:57 2012] Offset between fit and detection position for source 1 = 0.256845 pixels
[Tue Jan 17 17:23:57 2012] 154.672800 total counts/ 31.354800 bgd. counts: snr = 22.022897
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.256845 pixels
  Position = (575.3, 952.0) = 3 32 38.15 -27 39 45.6
  Extent = 2.9 (2.3-3.4)", rotation angle = 0
  Source counts = 123.3 +/- 12.4
  Background counts = 31.4
  Rate = 0.004 +/- 0.0004
[Tue Jan 17 17:23:57 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 17:23:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 17:23:57 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 17:23:57 2012] Source does appear to be extended
[Tue Jan 17 17:23:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 17:24:16 2012] Writing source region out to fullrun_ccd0_acisf12230_pi14-548_pass1_cl_src1_src.reg
[Tue Jan 17 17:24:16 2012] Extracting stamp from image fullrun_ccd0_acisf12230_pi14-548_cl_sm2.00.img.gz, (444, 821) - (706, 1083)
[Tue Jan 17 17:24:16 2012] Writing fullrun_ccd0_acisf12230_pi14-548_pass1_cl_src1.gif
[Tue Jan 17 17:24:18 2012] Size of ../../acisf12230/products/events/fullrun_ccd0_acisf12230_pi14-548_pass1_cl_src1_src.evt.gz[events] = 149 counts
[Tue Jan 17 17:24:18 2012] Mean chipx,y = (269.54, 409.55)
[Tue Jan 17 17:24:18 2012] Mean tdetx,y = (3470.55, 4862.46)
[Tue Jan 17 17:24:18 2012] chipx,y range = (237.00-300.00, 380.00-439.00)
[Tue Jan 17 17:24:18 2012] Size of ../../acisf12230/products/events/fullrun_ccd0_acisf12230_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 197 counts
[Tue Jan 17 17:24:19 2012] rmf not found, will run specextract
[Tue Jan 17 17:24:19 2012] arf not found, will run specextract
[Tue Jan 17 17:24:45 2012] ../../acisf12230/products/spectra/fullrun_ccd0_acisf12230_pi14-548_pass1_cl_src1.warf not found
[Tue Jan 17 17:24:45 2012] ../../acisf12230/products/spectra/fullrun_ccd0_acisf12230_pi14-548_pass1_cl_src1.wrmf not found
[Tue Jan 17 17:24:45 2012] Removal of ../../acisf12230/products/spectra/fullrun_ccd0_acisf12230_pi14-548_pass1_cl_src1.soff failed
[Tue Jan 17 17:34:15 2012] Keeping rmf generated by specextract
[Tue Jan 17 17:34:15 2012] 158.547
[Tue Jan 17 18:01:28 2012] Updating aperture counts using extracted products
[Tue Jan 17 18:01:28 2012] Error reading totcts from fullrun_ccd0_acisf12230_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Jan 17 18:01:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 18:01:28 2012] Using photon index=1.80, rate=0.00365, arf fullrun_ccd0_acisf12230_pi14-548_pass1_cl_src1.arf
[Tue Jan 17 18:01:28 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 18:01:28 2012] Updating source flux to 5.6e-14
[Tue Jan 17 18:01:37 2012] Reading fit data from acisf12230/analysis//spectral/fullrun_ccd0_acisf12230_pi14-548_pass1_cl_src1_pl.csv
[Tue Jan 17 18:01:37 2012] Spectral fit parameter nH value = 1.32195e+21
[Tue Jan 17 18:01:37 2012] Spectral fit parameter PhoIndex value = 2.17389
[Tue Jan 17 18:01:37 2012] Failed to get F(0.3-8.0) from acisf12230/analysis//spectral/fullrun_ccd0_acisf12230_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jan 17 18:01:37 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 18:01:37 2012] Using Nh = 1.3e+21, photon index=2.17, rate=0.00365, arf fullrun_ccd0_acisf12230_pi14-548_pass1_cl_src1.arf
[Tue Jan 17 18:01:37 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 18:01:37 2012] Updating source flux to 4.7e-14