[Tue Jan 17 04:51:13 2012] Detection parameters:
  Position = (312.5, 848.8) = 3 32 37.73 -27 52 12.5
  Extent = 0.8" x 0.5", rotation angle = 17 degrees
  Source counts = 85.7 +/- 9.4
  Background counts = 2.3
  Rate = 0.002 +/- 0.0002

[Tue Jan 17 04:51:14 2012] Off-axis axis estimate = 4.77'
[Tue Jan 17 06:00:27 2012] Using EEF radius (= 1.09 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 06:00:27 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 06:00:27 2012] Initial guess for spatial extent in simple fitting = 1.09"
[Tue Jan 17 06:00:27 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.019
[Tue Jan 17 06:00:27 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 1.09"
[Tue Jan 17 06:06:49 2012] fullrun_ccd3_acisf12227_pi14-548_cl_pass0_src1.ximg exists
[Tue Jan 17 06:06:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12227_pi14-548_cl_pass0_src1.csv
[Tue Jan 17 06:06:49 2012] fullrun_ccd3_acisf12227_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Jan 17 06:06:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12227_pi14-548_cl_pass0_src1.csv
[Tue Jan 17 06:06:49 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12227_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12227_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 06:06:49 2012] fullrun_ccd3_acisf12227_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan 17 06:06:49 2012] fullrun_ccd3_acisf12227_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan 17 06:06:49 2012] Fit fullrun_ccd3_acisf12227_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan 17 06:17:59 2012] Spatial fit model total counts = 87.590200, observed total counts = 91.000000
[Tue Jan 17 06:17:59 2012] Offset between fit and detection position for source 3 = 0.673994 pixels
[Tue Jan 17 06:17:59 2012] 88.369937 total counts/ 0.704737 bgd. counts: snr = 104.427214
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.673994 pixels
  Position = (313.0, 849.3) = 3 32 37.73 -27 52 12.5
  Extent = 0.9 (0.7-0.9)", rotation angle = 0
  Source counts = 87.7 +/- 9.4
  Background counts = 0.7
  Rate = 0.002 +/- 0.0002
[Tue Jan 17 06:17:59 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 06:17:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 06:17:59 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 06:17:59 2012] Source does appear to be extended
[Tue Jan 17 06:17:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 07:16:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 07:16:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 07:16:39 2012] Initial guess for spatial extent in simple fitting = 0.87"
[Tue Jan 17 07:16:39 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.965
[Tue Jan 17 07:16:39 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 0.87"
[Tue Jan 17 07:23:06 2012] fullrun_ccd3_acisf12227_pi14-548_cl_pass1_src1.ximg exists
[Tue Jan 17 07:23:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12227_pi14-548_cl_pass1_src1.csv
[Tue Jan 17 07:23:06 2012] fullrun_ccd3_acisf12227_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Jan 17 07:23:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12227_pi14-548_cl_pass1_src1.csv
[Tue Jan 17 07:23:06 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12227_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12227_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 07:23:06 2012] fullrun_ccd3_acisf12227_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan 17 07:23:06 2012] fullrun_ccd3_acisf12227_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan 17 07:23:06 2012] Fit fullrun_ccd3_acisf12227_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan 17 07:39:30 2012] Spatial fit model total counts = 90.223300, observed total counts = 91.000000
[Tue Jan 17 07:39:30 2012] Offset between fit and detection position for source 3 = 0.090008 pixels
[Tue Jan 17 07:39:30 2012] 90.519390 total counts/ 4.744990 bgd. counts: snr = 39.376765
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.090008 pixels
  Position = (313.1, 849.3) = 3 32 37.73 -27 52 12.5
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 85.8 +/- 9.5
  Background counts = 4.7
  Rate = 0.002 +/- 0.0002
[Tue Jan 17 07:39:30 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 07:39:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 07:39:30 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 07:39:30 2012] Source does appear to be extended
[Tue Jan 17 07:39:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 08:19:19 2012] Writing source region out to fullrun_ccd3_acisf12227_pi14-548_pass1_cl_src3_src.reg
[Tue Jan 17 08:19:19 2012] Extracting stamp from image fullrun_ccd3_acisf12227_pi14-548_cl_sm2.00.img.gz, (275, 811) - (351, 887)
[Tue Jan 17 08:19:19 2012] Writing fullrun_ccd3_acisf12227_pi14-548_pass1_cl_src3.gif
[Tue Jan 17 08:19:21 2012] Size of ../../acisf12227/products/events/fullrun_ccd3_acisf12227_pi14-548_pass1_cl_src3_src.evt.gz[events] = 88 counts
[Tue Jan 17 08:19:21 2012] Mean chipx,y = (933.34, 437.50)
[Tue Jan 17 08:19:21 2012] Mean tdetx,y = (4694.50, 3994.34)
[Tue Jan 17 08:19:21 2012] chipx,y range = (912.00-954.00, 417.00-458.00)
[Tue Jan 17 08:19:21 2012] Size of ../../acisf12227/products/events/fullrun_ccd3_acisf12227_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 32 counts
[Tue Jan 17 08:19:22 2012] Not generating rmf since there are only 85 counts
[Tue Jan 17 08:19:22 2012] arf not found, will run specextract
[Tue Jan 17 08:19:50 2012] ../../acisf12227/products/spectra/fullrun_ccd3_acisf12227_pi14-548_pass1_cl_src3.warf not found
[Tue Jan 17 08:19:50 2012] ../../acisf12227/products/spectra/fullrun_ccd3_acisf12227_pi14-548_pass1_cl_src3.wrmf not found
[Tue Jan 17 08:19:50 2012] Removal of ../../acisf12227/products/spectra/fullrun_ccd3_acisf12227_pi14-548_pass1_cl_src3.soff failed
[Tue Jan 17 08:34:20 2012] Spectrum 3 has only 86 counts, deleting rmf
[Tue Jan 17 08:34:20 2012] 190.649
[Tue Jan 17 08:35:06 2012] Updating aperture counts using extracted products
[Tue Jan 17 08:35:06 2012] Error reading totcts from fullrun_ccd3_acisf12227_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Jan 17 08:35:06 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 08:35:06 2012] Using photon index=1.80, rate=0.00158, arf fullrun_ccd3_acisf12227_pi14-548_pass1_cl_src3.arf
[Tue Jan 17 08:35:06 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 08:35:06 2012] Updating source flux to 2e-14
[Tue Jan 17 08:35:18 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jan 17 08:35:19 2012] acisf12227/analysis//spectral/fullrun_ccd3_acisf12227_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete