[Tue Jan 17 04:51:08 2012] Detection parameters:
  Position = (866.7, 227.0) = 3 32 50.16 -27 52 52.1
  Extent = 2.0" x 1.6", rotation angle = 179 degrees
  Source counts = 45.3 +/- 7.3
  Background counts = 8.7
  Rate = 0.0008 +/- 0.0001

[Tue Jan 17 04:51:08 2012] Off-axis axis estimate = 7.00'
[Tue Jan 17 05:22:04 2012] Using EEF radius (= 2.18 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 05:22:04 2012] Initial guess for spatial extent in simple fitting = 2.18"
[Tue Jan 17 05:22:04 2012] source mask rpix=4.4, npix_max = 97, mask sum = 100, frac = 1.027
[Tue Jan 17 05:22:04 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 2.18"
[Tue Jan 17 05:39:09 2012] fullrun_ccd1_acisf12227_pi14-548_cl_pass0_src3.ximg exists
[Tue Jan 17 05:39:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12227_pi14-548_cl_pass0_src3.csv
[Tue Jan 17 05:39:09 2012] fullrun_ccd1_acisf12227_pi14-548_cl_pass0_src3_1.ximg exists
[Tue Jan 17 05:39:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12227_pi14-548_cl_pass0_src3.csv
[Tue Jan 17 05:39:09 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12227_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12227_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 05:39:09 2012] fullrun_ccd1_acisf12227_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Tue Jan 17 05:39:09 2012] fullrun_ccd1_acisf12227_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jan 17 05:39:09 2012] Fit fullrun_ccd1_acisf12227_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jan 17 06:17:55 2012] Spatial fit model total counts = 51.937200, observed total counts = 52.000000
[Tue Jan 17 06:17:55 2012] Offset between fit and detection position for source 16 = 0.560053 pixels
[Tue Jan 17 06:17:55 2012] 52.194359 total counts/ 0.211759 bgd. counts: snr = 112.963219
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.560053 pixels
  Position = (866.6, 227.6) = 3 32 50.18 -27 52 52.1
  Extent = 2.2 (1.7-2.5)", rotation angle = 0
  Source counts = 52.0 +/- 7.2
  Background counts = 0.2
  Rate = 0.001 +/- 0.0001
[Tue Jan 17 06:17:55 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 06:17:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 06:17:55 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 06:17:55 2012] Source does appear to be extended
[Tue Jan 17 06:17:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 06:44:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 06:44:04 2012] Initial guess for spatial extent in simple fitting = 2.23"
[Tue Jan 17 06:44:04 2012] source mask rpix=4.5, npix_max = 101, mask sum = 100, frac = 0.986
[Tue Jan 17 06:44:04 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 2.23"
[Tue Jan 17 06:58:22 2012] fullrun_ccd1_acisf12227_pi14-548_cl_pass1_src3.ximg exists
[Tue Jan 17 06:58:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12227_pi14-548_cl_pass1_src3.csv
[Tue Jan 17 06:58:22 2012] fullrun_ccd1_acisf12227_pi14-548_cl_pass1_src3_1.ximg exists
[Tue Jan 17 06:58:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12227_pi14-548_cl_pass1_src3.csv
[Tue Jan 17 06:58:22 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12227_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12227_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 06:58:22 2012] fullrun_ccd1_acisf12227_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Tue Jan 17 06:58:22 2012] fullrun_ccd1_acisf12227_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jan 17 06:58:22 2012] Fit fullrun_ccd1_acisf12227_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jan 17 07:39:27 2012] Spatial fit model total counts = 52.090300, observed total counts = 53.000000
[Tue Jan 17 07:39:27 2012] Offset between fit and detection position for source 16 = 0.224836 pixels
[Tue Jan 17 07:39:27 2012] 52.600024 total counts/ 0.033524 bgd. counts: snr = 287.097362
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.224836 pixels
  Position = (866.7, 227.4) = 3 32 50.18 -27 52 52.2
  Extent = 2.3 (1.6-2.7)", rotation angle = 0
  Source counts = 52.6 +/- 7.3
  Background counts = 0.0
  Rate = 0.001 +/- 0.0001
[Tue Jan 17 07:39:27 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 07:39:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 07:39:27 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 07:39:27 2012] Source does appear to be extended
[Tue Jan 17 07:39:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 07:52:30 2012] Writing source region out to fullrun_ccd1_acisf12227_pi14-548_pass1_cl_src16_src.reg
[Tue Jan 17 07:52:30 2012] Extracting stamp from image fullrun_ccd1_acisf12227_pi14-548_cl_sm2.00.img.gz, (762, 122) - (972, 332)
[Tue Jan 17 07:52:30 2012] Writing fullrun_ccd1_acisf12227_pi14-548_pass1_cl_src16.gif
[Tue Jan 17 07:53:33 2012] Size of ../../acisf12227/products/events/fullrun_ccd1_acisf12227_pi14-548_pass1_cl_src16_src.evt.gz[events] = 57 counts
[Tue Jan 17 07:53:33 2012] Mean chipx,y = (133.68, 197.07)
[Tue Jan 17 07:53:33 2012] Mean tdetx,y = (4934.93, 4240.68)
[Tue Jan 17 07:53:33 2012] chipx,y range = (108.00-158.00, 175.00-222.00)
[Tue Jan 17 07:53:33 2012] Size of ../../acisf12227/products/events/fullrun_ccd1_acisf12227_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 209 counts
[Tue Jan 17 07:53:34 2012] Not generating rmf since there are only 52 counts
[Tue Jan 17 07:53:34 2012] arf not found, will run specextract
[Tue Jan 17 07:53:52 2012] ../../acisf12227/products/spectra/fullrun_ccd1_acisf12227_pi14-548_pass1_cl_src16.warf not found
[Tue Jan 17 07:53:52 2012] ../../acisf12227/products/spectra/fullrun_ccd1_acisf12227_pi14-548_pass1_cl_src16.wrmf not found
[Tue Jan 17 07:53:52 2012] Removal of ../../acisf12227/products/spectra/fullrun_ccd1_acisf12227_pi14-548_pass1_cl_src16.soff failed
[Tue Jan 17 07:59:13 2012] Spectrum 16 has only 53 counts, deleting rmf
[Tue Jan 17 07:59:13 2012] 180.192
[Tue Jan 17 08:35:04 2012] Updating aperture counts using extracted products
[Tue Jan 17 08:35:04 2012] Error reading totcts from fullrun_ccd1_acisf12227_pi14-548_pass1_cl_src16_src.pi.gz
[Tue Jan 17 08:35:05 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 08:35:05 2012] Using photon index=1.80, rate=0.000968, arf fullrun_ccd1_acisf12227_pi14-548_pass1_cl_src16.arf
[Tue Jan 17 08:35:05 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 08:35:05 2012] Updating source flux to 1.3e-14
[Tue Jan 17 08:35:12 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jan 17 08:35:13 2012] acisf12227/analysis//spectral/fullrun_ccd1_acisf12227_pi14-548_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete