[Mon Oct  3 07:09:37 2011] Detection parameters:
  Position = (1069.5, 554.5) = 16 17 57.18 -51 4 8.1
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 15.1 +/- 5.7
  Background counts = 17.9
  Rate = 0.0008 +/- 0.0003

[Mon Oct  3 07:09:43 2011] Off-axis axis estimate = 3.77'
[Mon Oct  3 07:12:46 2011] Using EEF radius (= 0.76 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 07:12:46 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Mon Oct  3 07:12:46 2011] source mask rpix=1.6, npix_max = 16, mask sum = 19, frac = 1.129
[Mon Oct  3 07:12:46 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 0.76"
[Mon Oct  3 07:12:49 2011] fullrun_ccd2_acisf12224_pi14-548_cl_pass0_src27.ximg exists
[Mon Oct  3 07:12:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12224_pi14-548_cl_pass0_src27.csv
[Mon Oct  3 07:12:49 2011] fullrun_ccd2_acisf12224_pi14-548_cl_pass0_src27_1.ximg exists
[Mon Oct  3 07:12:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12224_pi14-548_cl_pass0_src27.csv
[Mon Oct  3 07:12:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12224_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12224_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 07:12:50 2011] fullrun_ccd2_acisf12224_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Mon Oct  3 07:12:50 2011] fullrun_ccd2_acisf12224_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Oct  3 07:12:50 2011] Fit fullrun_ccd2_acisf12224_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Mon Oct  3 07:13:25 2011] Spatial fit model total counts = 350.528000, observed total counts = 349.000000
[Mon Oct  3 07:13:25 2011] Offset between fit and detection position for source 12 = 0.391685 pixels
[Mon Oct  3 07:13:25 2011] 357.232000 total counts/ 312.328000 bgd. counts: snr = 2.540853
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.391685 pixels
  Position = (1069.8, 554.8) = 16 17 57.19 -51 4 8.2
  Extent = 1.1 (0.3-1.5)", rotation angle = 0
  Source counts = 44.9 +/- 18.9
  Background counts = 312.3
  Rate = 0.003 +/- 0.001
[Mon Oct  3 07:13:25 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 07:13:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 07:13:25 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 07:13:25 2011] Source does appear to be extended
[Mon Oct  3 07:13:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 07:14:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct  3 07:14:01 2011] Initial guess for spatial extent in simple fitting = 1.13"
[Mon Oct  3 07:14:01 2011] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.800
[Mon Oct  3 07:14:01 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 1.13"
[Mon Oct  3 07:14:05 2011] fullrun_ccd2_acisf12224_pi14-548_cl_pass1_src18.ximg exists
[Mon Oct  3 07:14:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12224_pi14-548_cl_pass1_src18.csv
[Mon Oct  3 07:14:05 2011] fullrun_ccd2_acisf12224_pi14-548_cl_pass1_src18_1.ximg exists
[Mon Oct  3 07:14:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12224_pi14-548_cl_pass1_src18.csv
[Mon Oct  3 07:14:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12224_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12224_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 07:14:09 2011] fullrun_ccd2_acisf12224_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Mon Oct  3 07:14:09 2011] fullrun_ccd2_acisf12224_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Mon Oct  3 07:14:09 2011] Fit fullrun_ccd2_acisf12224_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Mon Oct  3 07:14:36 2011] Spatial fit model total counts = 351.832000, observed total counts = 349.000000
[Mon Oct  3 07:14:36 2011] Offset between fit and detection position for source 12 = 0.234036 pixels
[Mon Oct  3 07:14:36 2011] 358.630100 total counts/ 313.987000 bgd. counts: snr = 2.519408
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.234036 pixels
  Position = (1069.6, 555.0) = 16 17 57.20 -51 4 8.1
  Extent = 1.2 (0.4-2.3)", rotation angle = 0
  Source counts = 44.6 +/- 18.9
  Background counts = 314.0
  Rate = 0.003 +/- 0.001
[Mon Oct  3 07:14:36 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 07:14:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 07:14:36 2011] Assessing source extent using major axis lower bound
[Mon Oct  3 07:14:36 2011] Source does appear to be extended
[Mon Oct  3 07:14:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 07:19:33 2011] Not overwriting source region fullrun_ccd2_acisf12224_pi14-548_pass1_cl_src12_src.reg
[Mon Oct  3 07:19:33 2011] Extracting stamp from image fullrun_ccd2_acisf12224_pi14-548_cl_sm2.00.img.gz, (1015, 500) - (1125, 610)
[Mon Oct  3 07:19:33 2011] Writing fullrun_ccd2_acisf12224_pi14-548_pass1_cl_src12.gif
[Mon Oct  3 07:20:42 2011] ../../acisf12224/products/events/fullrun_ccd2_acisf12224_pi14-548_pass1_cl_src12_src.evt and ../../acisf12224/products/events/fullrun_ccd2_acisf12224_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Mon Oct  3 07:20:42 2011] Size of ../../acisf12224/products/events/fullrun_ccd2_acisf12224_pi14-548_pass1_cl_src12_src.evt.gz[events] = 394 counts
[Mon Oct  3 07:20:42 2011] Mean chipx,y = (139.12, 590.36)
[Mon Oct  3 07:20:42 2011] Mean tdetx,y = (3651.36, 3946.88)
[Mon Oct  3 07:20:42 2011] chipx,y range = (113.00-160.00, 564.00-616.00)
[Mon Oct  3 07:20:42 2011] Size of ../../acisf12224/products/events/fullrun_ccd2_acisf12224_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 3194 counts
[Mon Oct  3 07:20:42 2011] ../../acisf12224/products/images/fullrun_ccd2_acisf12224_pi14-548_pass1_cl_src12_src.img and ../../acisf12224/products/images/fullrun_ccd2_acisf12224_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Mon Oct  3 07:20:42 2011] ../../acisf12224/products/spectra/fullrun_ccd2_acisf12224_pi14-548_pass1_cl_src12_src.pi and ../../acisf12224/products/spectra/fullrun_ccd2_acisf12224_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Mon Oct  3 07:20:42 2011] Not generating rmf since there are only 44 counts
[Mon Oct  3 07:20:46 2011] ../../acisf12224/products/lightcurves/fullrun_ccd2_acisf12224_pi14-548_pass1_cl_src12_src.lc and ../../acisf12224/products/lightcurves/fullrun_ccd2_acisf12224_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Mon Oct  3 07:20:49 2011] 175.519
[Mon Oct  3 07:22:15 2011] Updating aperture counts using extracted products
[Mon Oct  3 07:22:15 2011] Error reading totcts from fullrun_ccd2_acisf12224_pi14-548_pass1_cl_src12_src.pi.gz
[Mon Oct  3 07:22:15 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct  3 07:22:15 2011] Using photon index=1.80, rate=0.0025, arf fullrun_ccd2_acisf12224_pi14-548_pass1_cl_src12.arf
[Mon Oct  3 07:22:15 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct  3 07:22:15 2011] Updating source flux to 5.1e-14
[Mon Oct  3 07:22:36 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting