[Mon Oct  3 07:09:29 2011] Detection parameters:
  Position = (564.5, 1203.5) = 16 17 39.85 -51 3 54.9
  Extent = 0.5" x 0.5", rotation angle = 90 degrees
  Source counts = 21.9 +/- 8.5
  Background counts = 51.1
  Rate = 0.001 +/- 0.0005

[Mon Oct  3 07:09:33 2011] Off-axis axis estimate = 2.42'
[Mon Oct  3 07:12:12 2011] Using EEF radius (= 0.48 ")to estimate initial spatial extent for simple fitting
[Mon Oct  3 07:12:12 2011] Initial guess for spatial extent in simple fitting = 0.48"
[Mon Oct  3 07:12:12 2011] source mask rpix=1.0, npix_max = 8, mask sum = 7, frac = 0.801
[Mon Oct  3 07:12:12 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 0.48"
[Mon Oct  3 07:12:14 2011] fullrun_ccd0_acisf12224_pi14-548_cl_pass0_src8.ximg exists
[Mon Oct  3 07:12:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12224_pi14-548_cl_pass0_src8.csv
[Mon Oct  3 07:12:14 2011] fullrun_ccd0_acisf12224_pi14-548_cl_pass0_src8_1.ximg exists
[Mon Oct  3 07:12:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12224_pi14-548_cl_pass0_src8.csv
[Mon Oct  3 07:12:14 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12224_pi14-548_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12224_pi14-548_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 07:12:20 2011] fullrun_ccd0_acisf12224_pi14-548_cl_pass0_tfrozen_src8.ximg exists
[Mon Oct  3 07:12:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12224_pi14-548_cl_pass0_tfrozen_src8.csv
[Mon Oct  3 07:12:20 2011] fullrun_ccd0_acisf12224_pi14-548_cl_pass0_tfrozen_src8_1.ximg exists
[Mon Oct  3 07:12:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf12224_pi14-548_cl_pass0_tfrozen_src8.csv
[Mon Oct  3 07:12:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf12224_pi14-548_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf12224_pi14-548_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct  3 07:13:13 2011] Source 13 is offset by 0.922915 and 1.639654 pixels which is larger than
2 X fitted extent = 0.489126 x 0.489126, not incorporating fit results
[Mon Oct  3 07:13:13 2011] Vigneting correction estimate = 1.000000
[Mon Oct  3 07:13:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct  3 07:13:13 2011] Assessing source extent using major
[Mon Oct  3 07:13:13 2011] Source does appear to be extended
[Mon Oct  3 07:13:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct  3 07:13:13 2011] Deleting source due to low Poisson probability 0.9