[Tue Jan 17 09:16:25 2012] Detection parameters:
  Position = (632.8, 233.3) = 3 32 38.87 -27 57 0.3
  Extent = 4.5" x 2.6", rotation angle = 3 degrees
  Source counts = 213.1 +/- 17.1
  Background counts = 77.9
  Rate = 0.002 +/- 0.0002

[Tue Jan 17 09:16:26 2012] Off-axis axis estimate = 9.10'
[Tue Jan 17 10:56:30 2012] Using EEF radius (= 3.66 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 10:56:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 10:56:30 2012] Initial guess for spatial extent in simple fitting = 3.66"
[Tue Jan 17 10:56:30 2012] source mask rpix=7.4, npix_max = 252, mask sum = 256, frac = 1.014
[Tue Jan 17 10:56:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 3.66"
[Tue Jan 17 11:22:44 2012] fullrun_ccd3_acisf12223_pi14-548_cl_pass0_src1.ximg exists
[Tue Jan 17 11:22:44 2012] fullrun_ccd3_acisf12223_pi14-548_cl_pass0_src1_1.ximg exists
[Tue Jan 17 11:22:44 2012] Fit fullrun_ccd3_acisf12223_pi14-548_cl_pass0_src1 appears to have run properly
[Tue Jan 17 11:22:44 2012] fullrun_ccd3_acisf12223_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan 17 11:22:44 2012] fullrun_ccd3_acisf12223_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan 17 11:22:44 2012] Fit fullrun_ccd3_acisf12223_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan 17 11:23:00 2012] Spatial fit model total counts = 329.190000, observed total counts = 326.000000
[Tue Jan 17 11:23:00 2012] Offset between fit and detection position for source 1 = 0.227307 pixels
[Tue Jan 17 11:23:00 2012] 329.457000 total counts/ 129.967000 bgd. counts: snr = 17.498652
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.227307 pixels
  Position = (632.9, 233.0) = 3 32 38.88 -27 57 0.7
  Extent = 3.3 (2.7-3.8)", rotation angle = 0
  Source counts = 199.5 +/- 18.2
  Background counts = 130.0
  Rate = 0.002 +/- 0.0002
[Tue Jan 17 11:23:00 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 11:23:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 11:23:00 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 11:23:00 2012] Source does appear to be extended
[Tue Jan 17 11:23:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 12:51:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 12:51:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 12:51:07 2012] Initial guess for spatial extent in simple fitting = 3.27"
[Tue Jan 17 12:51:07 2012] source mask rpix=6.6, npix_max = 204, mask sum = 196, frac = 0.959
[Tue Jan 17 12:51:07 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 3.27"
[Tue Jan 17 13:10:37 2012] fullrun_ccd3_acisf12223_pi14-548_cl_pass1_src1.ximg exists
[Tue Jan 17 13:10:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12223_pi14-548_cl_pass1_src1.csv
[Tue Jan 17 13:10:37 2012] fullrun_ccd3_acisf12223_pi14-548_cl_pass1_src1_1.ximg exists
[Tue Jan 17 13:10:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12223_pi14-548_cl_pass1_src1.csv
[Tue Jan 17 13:10:37 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12223_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12223_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 13:10:37 2012] fullrun_ccd3_acisf12223_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan 17 13:10:37 2012] fullrun_ccd3_acisf12223_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan 17 13:10:37 2012] Fit fullrun_ccd3_acisf12223_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan 17 13:10:52 2012] Spatial fit model total counts = 298.426000, observed total counts = 298.000000
[Tue Jan 17 13:10:52 2012] Offset between fit and detection position for source 1 = 0.098574 pixels
[Tue Jan 17 13:10:52 2012] 298.604000 total counts/ 104.706000 bgd. counts: snr = 18.949055
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.098574 pixels
  Position = (632.8, 233.1) = 3 32 38.89 -27 57 0.6
  Extent = 3.2 (2.6-3.8)", rotation angle = 0
  Source counts = 193.9 +/- 17.3
  Background counts = 104.7
  Rate = 0.002 +/- 0.0002
[Tue Jan 17 13:10:52 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 13:10:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 13:10:52 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 13:10:52 2012] Source does appear to be extended
[Tue Jan 17 13:10:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 13:57:55 2012] Writing source region out to fullrun_ccd3_acisf12223_pi14-548_pass1_cl_src1_src.reg
[Tue Jan 17 13:57:55 2012] Extracting stamp from image fullrun_ccd3_acisf12223_pi14-548_cl_sm2.00.img.gz, (486, 86) - (780, 380)
[Tue Jan 17 13:57:55 2012] Writing fullrun_ccd3_acisf12223_pi14-548_pass1_cl_src1.gif
[Tue Jan 17 13:57:57 2012] Size of ../../acisf12223/products/events/fullrun_ccd3_acisf12223_pi14-548_pass1_cl_src1_src.evt.gz[events] = 276 counts
[Tue Jan 17 13:57:57 2012] Mean chipx,y = (121.67, 278.59)
[Tue Jan 17 13:57:57 2012] Mean tdetx,y = (4853.41, 3182.67)
[Tue Jan 17 13:57:57 2012] chipx,y range = (82.00-162.00, 241.00-311.00)
[Tue Jan 17 13:57:57 2012] Size of ../../acisf12223/products/events/fullrun_ccd3_acisf12223_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 665 counts
[Tue Jan 17 13:57:58 2012] rmf not found, will run specextract
[Tue Jan 17 13:57:58 2012] arf not found, will run specextract
[Tue Jan 17 13:58:18 2012] ../../acisf12223/products/spectra/fullrun_ccd3_acisf12223_pi14-548_pass1_cl_src1.warf not found
[Tue Jan 17 13:58:18 2012] ../../acisf12223/products/spectra/fullrun_ccd3_acisf12223_pi14-548_pass1_cl_src1.wrmf not found
[Tue Jan 17 13:58:18 2012] Removal of ../../acisf12223/products/spectra/fullrun_ccd3_acisf12223_pi14-548_pass1_cl_src1.soff failed
[Tue Jan 17 14:09:34 2012] Keeping rmf generated by specextract
[Tue Jan 17 14:09:34 2012] 160.711
[Tue Jan 17 14:10:54 2012] Updating aperture counts using extracted products
[Tue Jan 17 14:10:54 2012] Error reading totcts from fullrun_ccd3_acisf12223_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Jan 17 14:10:55 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 14:10:55 2012] Using photon index=1.80, rate=0.00193, arf fullrun_ccd3_acisf12223_pi14-548_pass1_cl_src1.arf
[Tue Jan 17 14:10:55 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 14:10:55 2012] Updating source flux to 3e-14
[Tue Jan 17 14:11:36 2012] Reading fit data from acisf12223/analysis//spectral/fullrun_ccd3_acisf12223_pi14-548_pass1_cl_src1_pl.csv
[Tue Jan 17 14:11:36 2012] Spectral fit parameter nH value = 1.30279e+22
[Tue Jan 17 14:11:36 2012] Spectral fit parameter PhoIndex value = 1.40911
[Tue Jan 17 14:11:36 2012] Failed to get F(0.3-8.0) from acisf12223/analysis//spectral/fullrun_ccd3_acisf12223_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jan 17 14:11:36 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 14:11:36 2012] Using Nh = 1.3e+22, photon index=1.41, rate=0.00193, arf fullrun_ccd3_acisf12223_pi14-548_pass1_cl_src1.arf
[Tue Jan 17 14:11:36 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 14:11:36 2012] Updating source flux to 4.2e-14