[Tue Jan 17 09:16:20 2012] Detection parameters: Position = (248.8, 623.9) = 3 33 9.54 -27 46 4.2 Extent = 1.9" x 1.3", rotation angle = 157 degrees Source counts = 24.3 +/- 7.1 Background counts = 25.7 Rate = 0.0002 +/- 7e-05 [Tue Jan 17 09:16:21 2012] Off-axis axis estimate = 9.76' [Tue Jan 17 10:07:01 2012] Using EEF radius (= 4.21 ")to estimate initial spatial extent for simple fitting [Tue Jan 17 10:07:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Tue Jan 17 10:07:01 2012] Initial guess for spatial extent in simple fitting = 4.21" [Tue Jan 17 10:07:01 2012] source mask rpix=8.6, npix_max = 328, mask sum = 324, frac = 0.986 [Tue Jan 17 10:07:01 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 4.21" [Tue Jan 17 10:36:07 2012] fullrun_ccd1_acisf12223_pi14-548_cl_pass0_src9.ximg exists [Tue Jan 17 10:36:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12223_pi14-548_cl_pass0_src9.csv [Tue Jan 17 10:36:07 2012] fullrun_ccd1_acisf12223_pi14-548_cl_pass0_src9_1.ximg exists [Tue Jan 17 10:36:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12223_pi14-548_cl_pass0_src9.csv [Tue Jan 17 10:36:07 2012] It looks like the fit did not converge You should probably delete fullrun_ccd1_acisf12223_pi14-548_cl_pass0_src9_1.ximg Either tweak this fit manually starting from fullrun_ccd1_acisf12223_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jan 17 10:36:07 2012] fullrun_ccd1_acisf12223_pi14-548_cl_pass0_tfrozen_src9.ximg exists [Tue Jan 17 10:36:07 2012] fullrun_ccd1_acisf12223_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists [Tue Jan 17 10:36:07 2012] Fit fullrun_ccd1_acisf12223_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly [Tue Jan 17 11:22:55 2012] Spatial fit model total counts = 94.445700, observed total counts = 94.000000 [Tue Jan 17 11:22:55 2012] Offset between fit and detection position for source 27 = 2.295748 pixels [Tue Jan 17 11:22:55 2012] 94.682800 total counts/ 83.245800 bgd. counts: snr = 1.253519 Spatial fit parameters: Offset between fit and detection position for source 27 = 2.295748 pixels Position = (251.1, 623.7) = 3 33 9.47 -27 46 4.6 Extent = 1.1" x 1.1", rotation angle = 0 Source counts = 11.4 +/- 9.7 Background counts = 83.2 Rate = 0.0001 +/- 0.0001 Deleting source due to low Poisson probability