[Tue Jan 17 12:03:08 2012] Detection parameters:
  Position = (775.2, 1048.4) = 3 32 47.88 -27 41 50.0
  Extent = 1.1" x 0.9", rotation angle = 139 degrees
  Source counts = 22.5 +/- 5.2
  Background counts = 4.5
  Rate = 0.0007 +/- 0.0002

[Tue Jan 17 12:03:09 2012] Off-axis axis estimate = 8.05'
[Tue Jan 17 12:32:29 2012] Using EEF radius (= 2.86 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 12:32:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 12:32:29 2012] Initial guess for spatial extent in simple fitting = 2.86"
[Tue Jan 17 12:32:29 2012] source mask rpix=5.8, npix_max = 159, mask sum = 156, frac = 0.976
[Tue Jan 17 12:32:29 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 2.86"
[Tue Jan 17 12:53:31 2012] fullrun_ccd1_acisf12222_pi14-548_cl_pass0_src4.ximg exists
[Tue Jan 17 12:53:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12222_pi14-548_cl_pass0_src4.csv
[Tue Jan 17 12:53:31 2012] fullrun_ccd1_acisf12222_pi14-548_cl_pass0_src4_1.ximg exists
[Tue Jan 17 12:53:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12222_pi14-548_cl_pass0_src4.csv
[Tue Jan 17 12:53:31 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12222_pi14-548_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12222_pi14-548_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 12:53:31 2012] fullrun_ccd1_acisf12222_pi14-548_cl_pass0_tfrozen_src4.ximg exists
[Tue Jan 17 12:53:31 2012] fullrun_ccd1_acisf12222_pi14-548_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Jan 17 12:53:31 2012] Fit fullrun_ccd1_acisf12222_pi14-548_cl_pass0_tfrozen_src4 appears to have run properly
[Tue Jan 17 13:21:22 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 26.959672 pixels away
[Tue Jan 17 13:21:22 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 13:21:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 13:21:22 2012] Assessing source extent using major
[Tue Jan 17 13:21:22 2012] Source does appear to be extended
[Tue Jan 17 13:21:22 2012] Computing asymmetry using major and minor axis, asym = 1.22
[Tue Jan 17 13:47:07 2012] Using EEF radius (= 2.86 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 13:47:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 13:47:07 2012] Initial guess for spatial extent in simple fitting = 2.86"
[Tue Jan 17 13:47:07 2012] source mask rpix=5.8, npix_max = 159, mask sum = 156, frac = 0.976
[Tue Jan 17 13:47:07 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 2.86"
[Tue Jan 17 14:05:51 2012] fullrun_ccd1_acisf12222_pi14-548_cl_pass1_src4.ximg exists
[Tue Jan 17 14:05:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12222_pi14-548_cl_pass1_src4.csv
[Tue Jan 17 14:05:51 2012] fullrun_ccd1_acisf12222_pi14-548_cl_pass1_src4_1.ximg exists
[Tue Jan 17 14:05:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12222_pi14-548_cl_pass1_src4.csv
[Tue Jan 17 14:05:51 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12222_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12222_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 14:05:51 2012] fullrun_ccd1_acisf12222_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Tue Jan 17 14:05:51 2012] fullrun_ccd1_acisf12222_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Jan 17 14:05:51 2012] Fit fullrun_ccd1_acisf12222_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Tue Jan 17 14:41:49 2012] Spatial fit model total counts = 32.797500, observed total counts = 33.000000
[Tue Jan 17 14:41:49 2012] Offset between fit and detection position for source 4 = 1.533443 pixels
[Tue Jan 17 14:41:49 2012] 33.044770 total counts/ 9.472670 bgd. counts: snr = 7.658824
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.533443 pixels
  Position = (775.8, 1049.8) = 3 32 47.88 -27 41 49.6
  Extent = 1.8 (1.4-2.8)", rotation angle = 0
  Source counts = 23.6 +/- 5.7
  Background counts = 9.5
  Rate = 0.0008 +/- 0.0002
[Tue Jan 17 14:41:49 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 14:41:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 14:41:49 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 14:41:49 2012] Source does appear to be extended
[Tue Jan 17 14:41:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 14:54:15 2012] Writing source region out to fullrun_ccd1_acisf12222_pi14-548_pass1_cl_src4_src.reg
[Tue Jan 17 14:54:15 2012] Extracting stamp from image fullrun_ccd1_acisf12222_pi14-548_cl_sm2.00.img.gz, (692, 966) - (860, 1134)
[Tue Jan 17 14:54:15 2012] Writing fullrun_ccd1_acisf12222_pi14-548_pass1_cl_src4.gif
[Tue Jan 17 14:55:55 2012] Size of ../../acisf12222/products/events/fullrun_ccd1_acisf12222_pi14-548_pass1_cl_src4_src.evt.gz[events] = 30 counts
[Tue Jan 17 14:55:55 2012] Mean chipx,y = (847.73, 755.80)
[Tue Jan 17 14:55:55 2012] Mean tdetx,y = (4376.20, 4954.73)
[Tue Jan 17 14:55:55 2012] chipx,y range = (829.00-870.00, 736.00-779.00)
[Tue Jan 17 14:55:55 2012] Size of ../../acisf12222/products/events/fullrun_ccd1_acisf12222_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 84 counts
[Tue Jan 17 14:55:56 2012] Not generating rmf since there are only 23 counts
[Tue Jan 17 14:55:56 2012] arf not found, will run specextract
[Tue Jan 17 14:56:20 2012] ../../acisf12222/products/spectra/fullrun_ccd1_acisf12222_pi14-548_pass1_cl_src4.warf not found
[Tue Jan 17 14:56:20 2012] ../../acisf12222/products/spectra/fullrun_ccd1_acisf12222_pi14-548_pass1_cl_src4.wrmf not found
[Tue Jan 17 14:56:20 2012] Removal of ../../acisf12222/products/spectra/fullrun_ccd1_acisf12222_pi14-548_pass1_cl_src4.soff failed
[Tue Jan 17 15:00:05 2012] Spectrum 4 has only 24 counts, deleting rmf
[Tue Jan 17 15:00:05 2012] 173.864
[Tue Jan 17 15:19:58 2012] Updating aperture counts using extracted products
[Tue Jan 17 15:19:59 2012] Error reading totcts from fullrun_ccd1_acisf12222_pi14-548_pass1_cl_src4_src.pi.gz
[Tue Jan 17 15:19:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 15:19:59 2012] Using photon index=1.80, rate=0.000769, arf fullrun_ccd1_acisf12222_pi14-548_pass1_cl_src4.arf
[Tue Jan 17 15:19:59 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Jan 17 15:19:59 2012] Updating source flux to 1.1e-14
[Tue Jan 17 15:20:05 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Jan 17 15:20:06 2012] acisf12222/analysis//spectral/fullrun_ccd1_acisf12222_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete