[Sat Feb 11 20:37:55 2012] Detection parameters:
  Position = (552.9, 833.3) = 3 32 44.45 -27 49 41.0
  Extent = 0.7" x 0.5", rotation angle = 117 degrees
  Source counts = 16.0 +/- 4.2
  Background counts = 2.0
  Rate = 0.0003 +/- 7e-05

[Sat Feb 11 20:37:56 2012] Off-axis axis estimate = 4.10'
[Sat Feb 11 21:55:23 2012] Using EEF radius (= 0.86 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 21:55:23 2012] Initial guess for spatial extent in simple fitting = 0.86"
[Sat Feb 11 21:55:23 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.989
[Sat Feb 11 21:55:23 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 0.86"
[Sat Feb 11 22:12:33 2012] fullrun_ccd3_acisf12213_pi14-548_cl_pass0_src7.ximg exists
[Sat Feb 11 22:12:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12213_pi14-548_cl_pass0_src7.csv
[Sat Feb 11 22:12:33 2012] fullrun_ccd3_acisf12213_pi14-548_cl_pass0_src7_1.ximg exists
[Sat Feb 11 22:12:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12213_pi14-548_cl_pass0_src7.csv
[Sat Feb 11 22:12:33 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12213_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12213_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 22:12:33 2012] fullrun_ccd3_acisf12213_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Sat Feb 11 22:12:33 2012] fullrun_ccd3_acisf12213_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Feb 11 22:12:33 2012] Fit fullrun_ccd3_acisf12213_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Sat Feb 11 22:12:46 2012] Spatial fit model total counts = 21.004800, observed total counts = 21.000000
[Sat Feb 11 22:12:46 2012] Offset between fit and detection position for source 5 = 0.935788 pixels
[Sat Feb 11 22:12:46 2012] 20.662590 total counts/ 8.022590 bgd. counts: snr = 4.462619
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.935788 pixels
  Position = (553.2, 834.2) = 3 32 44.45 -27 49 40.8
  Extent = 0.4 (0.3-0.7)", rotation angle = 0
  Source counts = 12.6 +/- 4.5
  Background counts = 8.0
  Rate = 0.0002 +/- 7e-05
[Sat Feb 11 22:12:46 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 22:12:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 22:12:46 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 22:12:46 2012] Source does appear to be extended
[Sat Feb 11 22:12:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 23:15:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 11 23:15:20 2012] Initial guess for spatial extent in simple fitting = 0.45"
[Sat Feb 11 23:15:20 2012] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.129
[Sat Feb 11 23:15:20 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 0.45"
[Sat Feb 11 23:32:43 2012] fullrun_ccd3_acisf12213_pi14-548_cl_pass1_src7.ximg exists
[Sat Feb 11 23:32:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12213_pi14-548_cl_pass1_src7.csv
[Sat Feb 11 23:32:43 2012] fullrun_ccd3_acisf12213_pi14-548_cl_pass1_src7_1.ximg exists
[Sat Feb 11 23:32:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12213_pi14-548_cl_pass1_src7.csv
[Sat Feb 11 23:32:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12213_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12213_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 23:32:43 2012] fullrun_ccd3_acisf12213_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Sat Feb 11 23:32:43 2012] fullrun_ccd3_acisf12213_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Feb 11 23:32:43 2012] Fit fullrun_ccd3_acisf12213_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Sat Feb 11 23:32:55 2012] Spatial fit model total counts = 21.890700, observed total counts = 22.000000
[Sat Feb 11 23:32:55 2012] Offset between fit and detection position for source 5 = 0.019790 pixels
[Sat Feb 11 23:32:55 2012] 21.084510 total counts/ 8.639810 bgd. counts: snr = 4.233819
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.019790 pixels
  Position = (553.2, 834.2) = 3 32 44.45 -27 49 40.8
  Extent = 0.4 (0.3-0.8)", rotation angle = 0
  Source counts = 12.4 +/- 4.6
  Background counts = 8.6
  Rate = 0.0002 +/- 7e-05
[Sat Feb 11 23:32:56 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 23:32:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 23:32:56 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 23:32:56 2012] Source does appear to be extended
[Sat Feb 11 23:32:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 00:22:31 2012] Writing source region out to fullrun_ccd3_acisf12213_pi14-548_pass1_cl_src5_src.reg
[Sun Feb 12 00:22:31 2012] Extracting stamp from image fullrun_ccd3_acisf12213_pi14-548_cl_sm2.00.img.gz, (534, 815) - (573, 854)
[Sun Feb 12 00:22:31 2012] Writing fullrun_ccd3_acisf12213_pi14-548_pass1_cl_src5.gif
[Sun Feb 12 00:25:35 2012] Size of ../../acisf12213/products/events/fullrun_ccd3_acisf12213_pi14-548_pass1_cl_src5_src.evt.gz[events] = 14 counts
[Sun Feb 12 00:25:35 2012] Mean chipx,y = (813.79, 538.57)
[Sun Feb 12 00:25:35 2012] Mean tdetx,y = (4593.43, 3874.79)
[Sun Feb 12 00:25:35 2012] chipx,y range = (799.00-833.00, 521.00-557.00)
[Sun Feb 12 00:25:35 2012] Size of ../../acisf12213/products/events/fullrun_ccd3_acisf12213_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 9 counts
[Sun Feb 12 00:25:36 2012] Not generating rmf since there are only 12 counts
[Sun Feb 12 00:25:36 2012] arf not found, will run specextract
[Sun Feb 12 00:26:03 2012] ../../acisf12213/products/spectra/fullrun_ccd3_acisf12213_pi14-548_pass1_cl_src5.warf not found
[Sun Feb 12 00:26:03 2012] ../../acisf12213/products/spectra/fullrun_ccd3_acisf12213_pi14-548_pass1_cl_src5.wrmf not found
[Sun Feb 12 00:26:03 2012] Removal of ../../acisf12213/products/spectra/fullrun_ccd3_acisf12213_pi14-548_pass1_cl_src5.soff failed
[Sun Feb 12 00:32:29 2012] Spectrum 5 has only 12 counts, deleting rmf
[Sun Feb 12 00:32:29 2012] 192.542
[Sun Feb 12 00:32:36 2012] Updating aperture counts using extracted products
[Sun Feb 12 00:32:36 2012] Error reading totcts from fullrun_ccd3_acisf12213_pi14-548_pass1_cl_src5_src.pi.gz
[Sun Feb 12 00:32:36 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 00:32:36 2012] Using photon index=1.80, rate=0.000203, arf fullrun_ccd3_acisf12213_pi14-548_pass1_cl_src5.arf
[Sun Feb 12 00:32:36 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 12 00:32:36 2012] Updating source flux to 2.5e-15
[Sun Feb 12 00:32:54 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 12 00:32:55 2012] acisf12213/analysis//spectral/fullrun_ccd3_acisf12213_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete