[Sat Feb 11 20:37:55 2012] Detection parameters:
  Position = (654.6, 60.9) = 3 32 40.69 -27 56 1.0
  Extent = 1.8" x 1.1", rotation angle = 80 degrees
  Source counts = 10.7 +/- 4.0
  Background counts = 5.3
  Rate = 0.0002 +/- 7e-05

[Sat Feb 11 20:37:56 2012] Off-axis axis estimate = 8.12'
[Sat Feb 11 21:55:23 2012] Using EEF radius (= 2.91 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 21:55:23 2012] Initial guess for spatial extent in simple fitting = 2.91"
[Sat Feb 11 21:55:23 2012] source mask rpix=5.9, npix_max = 164, mask sum = 156, frac = 0.946
[Sat Feb 11 21:55:23 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 2.91"
[Sat Feb 11 22:12:33 2012] fullrun_ccd3_acisf12213_pi14-548_cl_pass0_src12.ximg exists
[Sat Feb 11 22:12:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12213_pi14-548_cl_pass0_src12.csv
[Sat Feb 11 22:12:33 2012] fullrun_ccd3_acisf12213_pi14-548_cl_pass0_src12_1.ximg exists
[Sat Feb 11 22:12:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12213_pi14-548_cl_pass0_src12.csv
[Sat Feb 11 22:12:33 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12213_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12213_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 22:12:33 2012] fullrun_ccd3_acisf12213_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Sat Feb 11 22:12:33 2012] fullrun_ccd3_acisf12213_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Feb 11 22:12:33 2012] Fit fullrun_ccd3_acisf12213_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Sat Feb 11 22:12:46 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 34.636671 pixels away
[Sat Feb 11 22:12:46 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 22:12:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 22:12:46 2012] Assessing source extent using major
[Sat Feb 11 22:12:46 2012] Source does appear to be extended
[Sat Feb 11 22:12:46 2012] Computing asymmetry using major and minor axis, asym = 1.68
[Sat Feb 11 22:12:46 2012] Source is asymmetric
[Sat Feb 11 23:15:20 2012] Using EEF radius (= 2.91 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 23:15:20 2012] Initial guess for spatial extent in simple fitting = 2.91"
[Sat Feb 11 23:15:20 2012] source mask rpix=5.9, npix_max = 164, mask sum = 156, frac = 0.946
[Sat Feb 11 23:15:20 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 2.91"
[Sat Feb 11 23:32:43 2012] fullrun_ccd3_acisf12213_pi14-548_cl_pass1_src12.ximg exists
[Sat Feb 11 23:32:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12213_pi14-548_cl_pass1_src12.csv
[Sat Feb 11 23:32:43 2012] fullrun_ccd3_acisf12213_pi14-548_cl_pass1_src12_1.ximg exists
[Sat Feb 11 23:32:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12213_pi14-548_cl_pass1_src12.csv
[Sat Feb 11 23:32:43 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12213_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12213_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 23:32:43 2012] fullrun_ccd3_acisf12213_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Sat Feb 11 23:32:43 2012] fullrun_ccd3_acisf12213_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Feb 11 23:32:43 2012] Fit fullrun_ccd3_acisf12213_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Sat Feb 11 23:32:55 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 42.970927 pixels away
[Sat Feb 11 23:32:55 2012] Spatial fit model total counts = 30.819100, observed total counts = 31.000000
[Sat Feb 11 23:32:55 2012] Offset between fit and detection position for source 13 = 3.168223 pixels
[Sat Feb 11 23:32:55 2012] 30.160100 total counts/ 10.043000 bgd. counts: snr = 6.347952
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 3.168223 pixels
  Position = (652.6, 63.4) = 3 32 40.78 -27 56 0.0
  Extent = 2.5 (1.0-4.0)", rotation angle = 0
  Source counts = 20.1 +/- 5.5
  Background counts = 10.0
  Rate = 0.0003 +/- 9e-05
[Sat Feb 11 23:32:56 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 23:32:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 23:32:56 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 23:32:56 2012] Source does appear to be extended
[Sat Feb 11 23:32:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 12 00:22:31 2012] Writing source region out to fullrun_ccd3_acisf12213_pi14-548_pass1_cl_src13_src.reg
[Sun Feb 12 00:22:31 2012] Extracting stamp from image fullrun_ccd3_acisf12213_pi14-548_cl_sm2.00.img.gz, (538, 0) - (767, 178)
[Sun Feb 12 00:22:31 2012] Writing fullrun_ccd3_acisf12213_pi14-548_pass1_cl_src13.gif
[Sun Feb 12 00:27:49 2012] Size of ../../acisf12213/products/events/fullrun_ccd3_acisf12213_pi14-548_pass1_cl_src13_src.evt.gz[events] = 34 counts
[Sun Feb 12 00:27:49 2012] Mean chipx,y = (42.91, 627.88)
[Sun Feb 12 00:27:49 2012] Mean tdetx,y = (4504.12, 3103.91)
[Sun Feb 12 00:27:49 2012] chipx,y range = (18.00-65.00, 596.00-659.00)
[Sun Feb 12 00:27:49 2012] Size of ../../acisf12213/products/events/fullrun_ccd3_acisf12213_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 230 counts
[Sun Feb 12 00:27:50 2012] Not generating rmf since there are only 20 counts
[Sun Feb 12 00:27:50 2012] arf not found, will run specextract
[Sun Feb 12 00:28:16 2012] ../../acisf12213/products/spectra/fullrun_ccd3_acisf12213_pi14-548_pass1_cl_src13.warf not found
[Sun Feb 12 00:28:16 2012] ../../acisf12213/products/spectra/fullrun_ccd3_acisf12213_pi14-548_pass1_cl_src13.wrmf not found
[Sun Feb 12 00:28:16 2012] Removal of ../../acisf12213/products/spectra/fullrun_ccd3_acisf12213_pi14-548_pass1_cl_src13.soff failed
[Sun Feb 12 00:32:29 2012] Spectrum 13 has only 20 counts, deleting rmf
[Sun Feb 12 00:32:29 2012] 163.634
[Sun Feb 12 00:32:36 2012] Updating aperture counts using extracted products
[Sun Feb 12 00:32:36 2012] Error reading totcts from fullrun_ccd3_acisf12213_pi14-548_pass1_cl_src13_src.pi.gz
[Sun Feb 12 00:32:36 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 00:32:36 2012] Using photon index=1.80, rate=0.000328, arf fullrun_ccd3_acisf12213_pi14-548_pass1_cl_src13.arf
[Sun Feb 12 00:32:36 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 12 00:32:36 2012] Updating source flux to 4.9e-15
[Sun Feb 12 00:32:54 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Feb 12 00:32:55 2012] acisf12213/analysis//spectral/fullrun_ccd3_acisf12213_pi14-548_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete