[Sat Feb 11 20:37:49 2012] Detection parameters:
  Position = (579.9, 171.6) = 3 32 44.03 -27 46 35.9
  Extent = 0.7" x 0.5", rotation angle = 136 degrees
  Source counts = 15.1 +/- 4.1
  Background counts = 1.9
  Rate = 0.0002 +/- 7e-05

[Sat Feb 11 20:37:51 2012] Off-axis axis estimate = 4.29'
[Sat Feb 11 21:23:39 2012] Using EEF radius (= 0.92 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 21:23:39 2012] Initial guess for spatial extent in simple fitting = 0.92"
[Sat Feb 11 21:23:39 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.889
[Sat Feb 11 21:23:39 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 0.92"
[Sat Feb 11 21:43:50 2012] fullrun_ccd1_acisf12213_pi14-548_cl_pass0_src11.ximg exists
[Sat Feb 11 21:43:50 2012] fullrun_ccd1_acisf12213_pi14-548_cl_pass0_src11_1.ximg exists
[Sat Feb 11 21:43:50 2012] Fit fullrun_ccd1_acisf12213_pi14-548_cl_pass0_src11 appears to have run properly
[Sat Feb 11 21:43:50 2012] fullrun_ccd1_acisf12213_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Sat Feb 11 21:43:50 2012] fullrun_ccd1_acisf12213_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Feb 11 21:43:50 2012] Fit fullrun_ccd1_acisf12213_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Feb 11 22:12:42 2012] Spatial fit model total counts = 19.689500, observed total counts = 20.000000
[Sat Feb 11 22:12:42 2012] Offset between fit and detection position for source 13 = 0.877052 pixels
[Sat Feb 11 22:12:42 2012] 19.633000 total counts/ 2.562200 bgd. counts: snr = 10.664669
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.877052 pixels
  Position = (580.5, 172.2) = 3 32 44.03 -27 46 35.8
  Extent = 0.8 (0.6-1.2)", rotation angle = 0
  Source counts = 17.1 +/- 4.4
  Background counts = 2.6
  Rate = 0.0003 +/- 7e-05
[Sat Feb 11 22:12:42 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 22:12:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 22:12:42 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 22:12:42 2012] Source does appear to be extended
[Sat Feb 11 22:12:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 22:47:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 11 22:47:32 2012] Initial guess for spatial extent in simple fitting = 0.83"
[Sat Feb 11 22:47:32 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.051
[Sat Feb 11 22:47:32 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 0.83"
[Sat Feb 11 23:04:42 2012] fullrun_ccd1_acisf12213_pi14-548_cl_pass1_src11.ximg exists
[Sat Feb 11 23:04:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12213_pi14-548_cl_pass1_src11.csv
[Sat Feb 11 23:04:42 2012] fullrun_ccd1_acisf12213_pi14-548_cl_pass1_src11_1.ximg exists
[Sat Feb 11 23:04:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12213_pi14-548_cl_pass1_src11.csv
[Sat Feb 11 23:04:42 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12213_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12213_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 23:04:42 2012] fullrun_ccd1_acisf12213_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Sat Feb 11 23:04:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12213_pi14-548_cl_pass1_tfrozen_src11.csv
[Sat Feb 11 23:04:42 2012] fullrun_ccd1_acisf12213_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Feb 11 23:04:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12213_pi14-548_cl_pass1_tfrozen_src11.csv
[Sat Feb 11 23:04:42 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12213_pi14-548_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12213_pi14-548_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 23:32:53 2012] Spatial fit model total counts = 16.526800, observed total counts = 20.000000
[Sat Feb 11 23:32:53 2012] Offset between fit and detection position for source 13 = 0.144958 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.144958 pixels
  Position = (580.4, 172.1) = 3 32 44.03 -27 46 35.9
  Extent = 0.8 (0.6-1.1)", rotation angle = 0
  Source counts = 17.7 +/- 4.2
  Background counts = 0.0
  Rate = 0.0003 +/- 7e-05
[Sat Feb 11 23:32:53 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 23:32:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 23:32:53 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 23:32:53 2012] Source does appear to be extended
[Sat Feb 11 23:32:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 23:49:08 2012] Writing source region out to fullrun_ccd1_acisf12213_pi14-548_pass1_cl_src13_src.reg
[Sat Feb 11 23:49:08 2012] Extracting stamp from image fullrun_ccd1_acisf12213_pi14-548_cl_sm2.00.img.gz, (542, 134) - (619, 211)
[Sat Feb 11 23:49:08 2012] Writing fullrun_ccd1_acisf12213_pi14-548_pass1_cl_src13.gif
[Sat Feb 11 23:55:11 2012] Size of ../../acisf12213/products/events/fullrun_ccd1_acisf12213_pi14-548_pass1_cl_src13_src.evt.gz[events] = 19 counts
[Sat Feb 11 23:55:11 2012] Mean chipx,y = (145.53, 555.74)
[Sat Feb 11 23:55:11 2012] Mean tdetx,y = (4576.26, 4252.53)
[Sat Feb 11 23:55:11 2012] chipx,y range = (129.00-160.00, 538.00-578.00)
[Sat Feb 11 23:55:11 2012] Size of ../../acisf12213/products/events/fullrun_ccd1_acisf12213_pi14-548_pass1_cl_src13_bgd.evt.gz[events] = 41 counts
[Sat Feb 11 23:55:12 2012] Not generating rmf since there are only 17 counts
[Sat Feb 11 23:55:12 2012] arf not found, will run specextract
[Sat Feb 11 23:55:41 2012] ../../acisf12213/products/spectra/fullrun_ccd1_acisf12213_pi14-548_pass1_cl_src13.warf not found
[Sat Feb 11 23:55:41 2012] ../../acisf12213/products/spectra/fullrun_ccd1_acisf12213_pi14-548_pass1_cl_src13.wrmf not found
[Sat Feb 11 23:55:41 2012] Removal of ../../acisf12213/products/spectra/fullrun_ccd1_acisf12213_pi14-548_pass1_cl_src13.soff failed
[Sun Feb 12 00:02:11 2012] Spectrum 13 has only 18 counts, deleting rmf
[Sun Feb 12 00:02:11 2012] 194.978
[Sun Feb 12 00:32:35 2012] Updating aperture counts using extracted products
[Sun Feb 12 00:32:35 2012] Error reading totcts from fullrun_ccd1_acisf12213_pi14-548_pass1_cl_src13_src.pi.gz
[Sun Feb 12 00:32:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 00:32:35 2012] Using photon index=1.80, rate=0.000289, arf fullrun_ccd1_acisf12213_pi14-548_pass1_cl_src13.arf
[Sun Feb 12 00:32:35 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 12 00:32:35 2012] Updating source flux to 3.6e-15
[Sun Feb 12 00:32:46 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting