[Sat Feb 11 20:37:49 2012] Detection parameters:
  Position = (714.1, 240.2) = 3 32 39.05 -27 46 2.1
  Extent = 0.6" x 0.5", rotation angle = 117 degrees
  Source counts = 27.4 +/- 5.4
  Background counts = 1.6
  Rate = 0.0004 +/- 9e-05

[Sat Feb 11 20:37:51 2012] Off-axis axis estimate = 3.69'
[Sat Feb 11 21:23:39 2012] Using EEF radius (= 0.74 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 21:23:39 2012] Initial guess for spatial extent in simple fitting = 0.74"
[Sat Feb 11 21:23:39 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.991
[Sat Feb 11 21:23:39 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 0.74"
[Sat Feb 11 21:43:50 2012] fullrun_ccd1_acisf12213_pi14-548_cl_pass0_src7.ximg exists
[Sat Feb 11 21:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12213_pi14-548_cl_pass0_src7.csv
[Sat Feb 11 21:43:50 2012] fullrun_ccd1_acisf12213_pi14-548_cl_pass0_src7_1.ximg exists
[Sat Feb 11 21:43:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12213_pi14-548_cl_pass0_src7.csv
[Sat Feb 11 21:43:50 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12213_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12213_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 21:43:50 2012] fullrun_ccd1_acisf12213_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Sat Feb 11 21:43:50 2012] fullrun_ccd1_acisf12213_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Feb 11 21:43:50 2012] Fit fullrun_ccd1_acisf12213_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Sat Feb 11 22:12:42 2012] Spatial fit model total counts = 30.086700, observed total counts = 33.000000
[Sat Feb 11 22:12:42 2012] Offset between fit and detection position for source 10 = 0.728539 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.728539 pixels
  Position = (714.6, 240.7) = 3 32 39.05 -27 46 2.1
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 29.0 +/- 5.4
  Background counts = 0.0
  Rate = 0.0005 +/- 9e-05
[Sat Feb 11 22:12:42 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 22:12:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 22:12:42 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 22:12:42 2012] Source does appear to be extended
[Sat Feb 11 22:12:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 22:47:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 11 22:47:32 2012] Initial guess for spatial extent in simple fitting = 0.65"
[Sat Feb 11 22:47:32 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.896
[Sat Feb 11 22:47:32 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 0.65"
[Sat Feb 11 23:04:42 2012] fullrun_ccd1_acisf12213_pi14-548_cl_pass1_src7.ximg exists
[Sat Feb 11 23:04:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12213_pi14-548_cl_pass1_src7.csv
[Sat Feb 11 23:04:42 2012] fullrun_ccd1_acisf12213_pi14-548_cl_pass1_src7_1.ximg exists
[Sat Feb 11 23:04:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12213_pi14-548_cl_pass1_src7.csv
[Sat Feb 11 23:04:42 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12213_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12213_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 23:04:42 2012] fullrun_ccd1_acisf12213_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Sat Feb 11 23:04:42 2012] fullrun_ccd1_acisf12213_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Feb 11 23:04:42 2012] Fit fullrun_ccd1_acisf12213_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Sat Feb 11 23:32:53 2012] Spatial fit model total counts = 31.785600, observed total counts = 33.000000
[Sat Feb 11 23:32:53 2012] Offset between fit and detection position for source 10 = 0.033017 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.033017 pixels
  Position = (714.6, 240.8) = 3 32 39.05 -27 46 2.1
  Extent = 0.7 (0.6-0.8)", rotation angle = 0
  Source counts = 30.5 +/- 5.5
  Background counts = 0.0
  Rate = 0.0005 +/- 9e-05
[Sat Feb 11 23:32:53 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 23:32:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 23:32:53 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 23:32:53 2012] Source does appear to be extended
[Sat Feb 11 23:32:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 23:49:08 2012] Writing source region out to fullrun_ccd1_acisf12213_pi14-548_pass1_cl_src10_src.reg
[Sat Feb 11 23:49:08 2012] Extracting stamp from image fullrun_ccd1_acisf12213_pi14-548_cl_sm2.00.img.gz, (685, 211) - (745, 271)
[Sat Feb 11 23:49:08 2012] Writing fullrun_ccd1_acisf12213_pi14-548_pass1_cl_src10.gif
[Sat Feb 11 23:53:03 2012] Size of ../../acisf12213/products/events/fullrun_ccd1_acisf12213_pi14-548_pass1_cl_src10_src.evt.gz[events] = 29 counts
[Sat Feb 11 23:53:03 2012] Mean chipx,y = (211.72, 692.90)
[Sat Feb 11 23:53:03 2012] Mean tdetx,y = (4439.10, 4318.72)
[Sat Feb 11 23:53:03 2012] chipx,y range = (195.00-228.00, 674.00-712.00)
[Sat Feb 11 23:53:03 2012] Size of ../../acisf12213/products/events/fullrun_ccd1_acisf12213_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 24 counts
[Sat Feb 11 23:53:04 2012] Not generating rmf since there are only 30 counts
[Sat Feb 11 23:53:04 2012] arf not found, will run specextract
[Sat Feb 11 23:53:28 2012] ../../acisf12213/products/spectra/fullrun_ccd1_acisf12213_pi14-548_pass1_cl_src10.warf not found
[Sat Feb 11 23:53:28 2012] ../../acisf12213/products/spectra/fullrun_ccd1_acisf12213_pi14-548_pass1_cl_src10.wrmf not found
[Sat Feb 11 23:53:28 2012] Removal of ../../acisf12213/products/spectra/fullrun_ccd1_acisf12213_pi14-548_pass1_cl_src10.soff failed
[Sun Feb 12 00:02:11 2012] Spectrum 10 has only 31 counts, deleting rmf
[Sun Feb 12 00:02:11 2012] 198.008
[Sun Feb 12 00:32:35 2012] Updating aperture counts using extracted products
[Sun Feb 12 00:32:35 2012] Error reading totcts from fullrun_ccd1_acisf12213_pi14-548_pass1_cl_src10_src.pi.gz
[Sun Feb 12 00:32:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 12 00:32:35 2012] Using photon index=1.80, rate=0.000498, arf fullrun_ccd1_acisf12213_pi14-548_pass1_cl_src10.arf
[Sun Feb 12 00:32:35 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Sun Feb 12 00:32:35 2012] Updating source flux to 6e-15
[Sun Feb 12 00:32:46 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting