[Fri Oct 28 10:06:57 2011] Detection parameters:
  Position = (125.9, 767.3) = 0 50 55.01 -73 18 2.8
  Extent = 0.8" x 0.5", rotation angle = 84 degrees
  Source counts = 16.7 +/- 4.2
  Background counts = 1.3
  Rate = 0.0005 +/- 0.0001

[Fri Oct 28 10:06:58 2011] Off-axis axis estimate = 3.52'
[Fri Oct 28 11:02:54 2011] Using EEF radius (= 0.70 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 11:02:54 2011] Initial guess for spatial extent in simple fitting = 0.70"
[Fri Oct 28 11:02:54 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.090
[Fri Oct 28 11:02:54 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 0.70"
[Fri Oct 28 11:12:54 2011] fullrun_ccd6_acisf12211_pi14-548_cl_pass0_src7.ximg exists
[Fri Oct 28 11:12:54 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf12211_pi14-548_cl_pass0_src7.csv
[Fri Oct 28 11:12:54 2011] fullrun_ccd6_acisf12211_pi14-548_cl_pass0_src7_1.ximg exists
[Fri Oct 28 11:12:54 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd6_acisf12211_pi14-548_cl_pass0_src7.csv
[Fri Oct 28 11:12:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12211_pi14-548_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12211_pi14-548_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 11:12:54 2011] fullrun_ccd6_acisf12211_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Fri Oct 28 11:12:54 2011] fullrun_ccd6_acisf12211_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Oct 28 11:12:54 2011] Fit fullrun_ccd6_acisf12211_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Oct 28 11:26:59 2011] Spatial fit model total counts = 19.284600, observed total counts = 18.000000
[Fri Oct 28 11:26:59 2011] Offset between fit and detection position for source 5 = 0.707272 pixels
[Fri Oct 28 11:26:59 2011] 19.309900 total counts/ 0.000000 bgd. counts: snr = 138747185739.409180
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.707272 pixels
  Position = (126.4, 767.8) = 0 50 55.02 -73 18 2.8
  Extent = 0.8 (0.7-1.0)", rotation angle = 0
  Source counts = 19.3 +/- 4.4
  Background counts = 0.0
  Rate = 0.0006 +/- 0.0001
[Fri Oct 28 11:26:59 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 11:26:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 11:26:59 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 11:26:59 2011] Source does appear to be extended
[Fri Oct 28 11:26:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 12:11:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 12:11:58 2011] Initial guess for spatial extent in simple fitting = 0.84"
[Fri Oct 28 12:11:58 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.029
[Fri Oct 28 12:11:58 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 0.84"
[Fri Oct 28 12:21:07 2011] fullrun_ccd6_acisf12211_pi14-548_cl_pass1_src7.ximg exists
[Fri Oct 28 12:21:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12211_pi14-548_cl_pass1_src7.csv
[Fri Oct 28 12:21:07 2011] fullrun_ccd6_acisf12211_pi14-548_cl_pass1_src7_1.ximg exists
[Fri Oct 28 12:21:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12211_pi14-548_cl_pass1_src7.csv
[Fri Oct 28 12:21:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12211_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12211_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 12:21:07 2011] fullrun_ccd6_acisf12211_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Fri Oct 28 12:21:07 2011] fullrun_ccd6_acisf12211_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Oct 28 12:21:07 2011] Fit fullrun_ccd6_acisf12211_pi14-548_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Oct 28 12:35:53 2011] Spatial fit model total counts = 18.785400, observed total counts = 18.000000
[Fri Oct 28 12:35:53 2011] Offset between fit and detection position for source 5 = 0.083273 pixels
[Fri Oct 28 12:35:53 2011] 18.797800 total counts/ 0.000000 bgd. counts: snr = 435078311427557.750000
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.083273 pixels
  Position = (126.5, 767.8) = 0 50 55.01 -73 18 2.8
  Extent = 0.9 (0.7-1.0)", rotation angle = 0
  Source counts = 18.8 +/- 4.3
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Fri Oct 28 12:35:53 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 12:35:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 12:35:53 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 12:35:53 2011] Source does appear to be extended
[Fri Oct 28 12:35:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 12:41:10 2011] Writing source region out to fullrun_ccd6_acisf12211_pi14-548_pass1_cl_src5_src.reg
[Fri Oct 28 12:41:10 2011] Extracting stamp from image fullrun_ccd6_acisf12211_pi14-548_cl_sm2.00.img.gz, (86, 727) - (167, 809)
[Fri Oct 28 12:41:10 2011] Writing fullrun_ccd6_acisf12211_pi14-548_pass1_cl_src5.gif
[Fri Oct 28 12:44:53 2011] Size of ../../acisf12211/products/events/fullrun_ccd6_acisf12211_pi14-548_pass1_cl_src5_src.evt.gz[events] = 18 counts
[Fri Oct 28 12:44:53 2011] Mean chipx,y = (974.06, 846.61)
[Fri Oct 28 12:44:53 2011] Mean tdetx,y = (3849.06, 2548.61)
[Fri Oct 28 12:44:53 2011] chipx,y range = (959.00-989.00, 826.00-860.00)
[Fri Oct 28 12:44:53 2011] Size of ../../acisf12211/products/events/fullrun_ccd6_acisf12211_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 22 counts
[Fri Oct 28 12:44:54 2011] Not generating rmf since there are only 18 counts
[Fri Oct 28 12:44:54 2011] arf not found, will run specextract
[Fri Oct 28 12:45:24 2011] ../../acisf12211/products/spectra/fullrun_ccd6_acisf12211_pi14-548_pass1_cl_src5.warf not found
[Fri Oct 28 12:45:24 2011] ../../acisf12211/products/spectra/fullrun_ccd6_acisf12211_pi14-548_pass1_cl_src5.wrmf not found
[Fri Oct 28 12:45:24 2011] Removal of ../../acisf12211/products/spectra/fullrun_ccd6_acisf12211_pi14-548_pass1_cl_src5.soff failed
[Fri Oct 28 12:46:05 2011] Spectrum 5 has only 19 counts, deleting rmf
[Fri Oct 28 12:46:05 2011] 201.466
[Fri Oct 28 12:50:39 2011] Updating aperture counts using extracted products
[Fri Oct 28 12:50:39 2011] Error reading totcts from fullrun_ccd6_acisf12211_pi14-548_pass1_cl_src5_src.pi.gz
[Fri Oct 28 12:50:39 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 12:50:39 2011] Using photon index=1.80, rate=0.000537, arf fullrun_ccd6_acisf12211_pi14-548_pass1_cl_src5.arf
[Fri Oct 28 12:50:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 12:50:39 2011] Updating source flux to 6.5e-15
[Fri Oct 28 12:50:53 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting