[Fri Oct 28 10:05:50 2011] Detection parameters:
  Position = (445.3, 725.7) = 0 51 48.34 -73 9 10.0
  Extent = 4.9" x 4.6", rotation angle = 78 degrees
  Source counts = 50.1 +/- 11.0
  Background counts = 69.9
  Rate = 0.001 +/- 0.0003

[Fri Oct 28 10:05:50 2011] Off-axis axis estimate = 12.78'
[Fri Oct 28 10:09:24 2011] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 10:09:24 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 10:09:24 2011] Initial guess for spatial extent in simple fitting = 7.32"
[Fri Oct 28 10:09:24 2011] source mask rpix=14.9, npix_max = 945, mask sum = 961, frac = 1.017
[Fri Oct 28 10:09:24 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 7.32"
[Fri Oct 28 10:38:29 2011] fullrun_ccd2_acisf12211_pi14-548_cl_pass0_src5.ximg exists
[Fri Oct 28 10:38:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12211_pi14-548_cl_pass0_src5.csv
[Fri Oct 28 10:38:29 2011] fullrun_ccd2_acisf12211_pi14-548_cl_pass0_src5_1.ximg exists
[Fri Oct 28 10:38:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12211_pi14-548_cl_pass0_src5.csv
[Fri Oct 28 10:38:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12211_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12211_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 10:38:29 2011] fullrun_ccd2_acisf12211_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Fri Oct 28 10:38:29 2011] fullrun_ccd2_acisf12211_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Oct 28 10:38:29 2011] Fit fullrun_ccd2_acisf12211_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Oct 28 11:26:57 2011] Spatial fit model total counts = 194.000000, observed total counts = 194.000000
[Fri Oct 28 11:26:57 2011] Offset between fit and detection position for source 5 = 2.113720 pixels
[Fri Oct 28 11:26:57 2011] 193.642700 total counts/ 141.336000 bgd. counts: snr = 4.399780
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 2.113720 pixels
  Position = (446.4, 727.5) = 0 51 48.28 -73 9 9.3
  Extent = 7.0 (4.6-9.7)", rotation angle = 0
  Source counts = 52.3 +/- 13.9
  Background counts = 141.3
  Rate = 0.001 +/- 0.0004
[Fri Oct 28 11:26:57 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 11:26:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 11:26:57 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 11:26:57 2011] Source does appear to be extended
[Fri Oct 28 11:26:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 11:27:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 11:27:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 11:27:12 2011] Initial guess for spatial extent in simple fitting = 7.02"
[Fri Oct 28 11:27:12 2011] source mask rpix=14.3, npix_max = 872, mask sum = 841, frac = 0.963
[Fri Oct 28 11:27:12 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 7.02"
[Fri Oct 28 11:54:36 2011] fullrun_ccd2_acisf12211_pi14-548_cl_pass1_src4.ximg exists
[Fri Oct 28 11:54:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12211_pi14-548_cl_pass1_src4.csv
[Fri Oct 28 11:54:36 2011] fullrun_ccd2_acisf12211_pi14-548_cl_pass1_src4_1.ximg exists
[Fri Oct 28 11:54:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12211_pi14-548_cl_pass1_src4.csv
[Fri Oct 28 11:54:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12211_pi14-548_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12211_pi14-548_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 11:54:36 2011] fullrun_ccd2_acisf12211_pi14-548_cl_pass1_tfrozen_src4.ximg exists
[Fri Oct 28 11:54:36 2011] fullrun_ccd2_acisf12211_pi14-548_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Oct 28 11:54:36 2011] Fit fullrun_ccd2_acisf12211_pi14-548_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Oct 28 12:35:51 2011] Warning, spatial fit 4 centroid is now closest to src. 20
[Fri Oct 28 12:35:51 2011] Source 4 in spatial fitting is no longer close to this source
[Fri Oct 28 12:35:51 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 12:35:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 12:35:51 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 12:35:51 2011] Source does appear to be extended
[Fri Oct 28 12:35:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 12:36:09 2011] Writing source region out to fullrun_ccd2_acisf12211_pi14-548_pass1_cl_src5_src.reg
[Fri Oct 28 12:36:09 2011] Extracting stamp from image fullrun_ccd2_acisf12211_pi14-548_cl_sm2.00.img.gz, (125, 406) - (767, 1049)
[Fri Oct 28 12:36:09 2011] Writing fullrun_ccd2_acisf12211_pi14-548_pass1_cl_src5.gif
[Fri Oct 28 12:38:00 2011] Size of ../../acisf12211/products/events/fullrun_ccd2_acisf12211_pi14-548_pass1_cl_src5_src.evt.gz[events] = 149 counts
[Fri Oct 28 12:38:00 2011] Mean chipx,y = (363.23, 705.30)
[Fri Oct 28 12:38:00 2011] Mean tdetx,y = (3766.30, 3722.77)
[Fri Oct 28 12:38:00 2011] chipx,y range = (294.00-426.00, 642.00-772.00)
[Fri Oct 28 12:38:00 2011] Size of ../../acisf12211/products/events/fullrun_ccd2_acisf12211_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 1040 counts
[Fri Oct 28 12:38:01 2011] Not generating rmf since there are only 52 counts
[Fri Oct 28 12:38:01 2011] arf not found, will run specextract
[Fri Oct 28 12:38:33 2011] ../../acisf12211/products/spectra/fullrun_ccd2_acisf12211_pi14-548_pass1_cl_src5.warf not found
[Fri Oct 28 12:38:33 2011] ../../acisf12211/products/spectra/fullrun_ccd2_acisf12211_pi14-548_pass1_cl_src5.wrmf not found
[Fri Oct 28 12:38:33 2011] Removal of ../../acisf12211/products/spectra/fullrun_ccd2_acisf12211_pi14-548_pass1_cl_src5.soff failed
[Fri Oct 28 12:39:19 2011] Spectrum 5 has only 52 counts, deleting rmf
[Fri Oct 28 12:39:19 2011] 151.462
[Fri Oct 28 12:50:39 2011] Updating aperture counts using extracted products
[Fri Oct 28 12:50:39 2011] Error reading totcts from fullrun_ccd2_acisf12211_pi14-548_pass1_cl_src5_src.pi.gz
[Fri Oct 28 12:50:39 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 12:50:39 2011] Using photon index=1.80, rate=0.0015, arf fullrun_ccd2_acisf12211_pi14-548_pass1_cl_src5.arf
[Fri Oct 28 12:50:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 12:50:39 2011] Updating source flux to 2.3e-14
[Fri Oct 28 12:50:42 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting