[Fri Oct 28 10:05:50 2011] Detection parameters:
  Position = (895.2, 607.6) = 0 50 57.43 -73 10 8.4
  Extent = 4.6" x 4.1", rotation angle = 114 degrees
  Source counts = 825.8 +/- 32.3
  Background counts = 219.2
  Rate = 0.02 +/- 0.0009

[Fri Oct 28 10:05:50 2011] Off-axis axis estimate = 11.38'
[Fri Oct 28 10:09:24 2011] Using EEF radius (= 5.77 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 10:09:24 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 10:09:24 2011] Initial guess for spatial extent in simple fitting = 5.77"
[Fri Oct 28 10:09:24 2011] source mask rpix=11.7, npix_max = 598, mask sum = 573, frac = 0.957
[Fri Oct 28 10:09:24 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 5.77"
[Fri Oct 28 10:38:29 2011] fullrun_ccd2_acisf12211_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 28 10:38:29 2011] fullrun_ccd2_acisf12211_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 28 10:38:29 2011] Fit fullrun_ccd2_acisf12211_pi14-548_cl_pass0_src1 appears to have run properly
[Fri Oct 28 10:38:29 2011] fullrun_ccd2_acisf12211_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 28 10:38:29 2011] fullrun_ccd2_acisf12211_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 28 10:38:29 2011] Fit fullrun_ccd2_acisf12211_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 28 11:26:57 2011] Spatial fit model total counts = 1167.000000, observed total counts = 1167.000000
[Fri Oct 28 11:26:57 2011] Offset between fit and detection position for source 1 = 0.870683 pixels
[Fri Oct 28 11:26:57 2011] 1166.427400 total counts/ 99.317400 bgd. counts: snr = 107.077080
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.870683 pixels
  Position = (896.0, 607.8) = 0 50 57.39 -73 10 8.5
  Extent = 5.9 (5.7-6.2)", rotation angle = 0
  Source counts = 1067.1 +/- 34.2
  Background counts = 99.3
  Rate = 0.03 +/- 0.001
[Fri Oct 28 11:26:57 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 11:26:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 11:26:57 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 11:26:57 2011] Source does appear to be extended
[Fri Oct 28 11:26:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 11:27:12 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 11:27:12 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 11:27:12 2011] Initial guess for spatial extent in simple fitting = 5.94"
[Fri Oct 28 11:27:12 2011] source mask rpix=12.1, npix_max = 632, mask sum = 621, frac = 0.983
[Fri Oct 28 11:27:12 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.94"
[Fri Oct 28 11:54:36 2011] fullrun_ccd2_acisf12211_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 28 11:54:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12211_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 11:54:36 2011] fullrun_ccd2_acisf12211_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 28 11:54:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12211_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 11:54:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12211_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12211_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 11:54:36 2011] fullrun_ccd2_acisf12211_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 28 11:54:36 2011] fullrun_ccd2_acisf12211_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 28 11:54:36 2011] Fit fullrun_ccd2_acisf12211_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 28 12:35:51 2011] Spatial fit model total counts = 1169.540000, observed total counts = 1173.000000
[Fri Oct 28 12:35:51 2011] Offset between fit and detection position for source 1 = 0.022346 pixels
[Fri Oct 28 12:35:51 2011] 1168.960000 total counts/ 103.160000 bgd. counts: snr = 104.934923
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.022346 pixels
  Position = (896.0, 607.8) = 0 50 57.39 -73 10 8.5
  Extent = 6.0 (5.7-6.2)", rotation angle = 0
  Source counts = 1065.8 +/- 34.2
  Background counts = 103.2
  Rate = 0.03 +/- 0.001
[Fri Oct 28 12:35:51 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 12:35:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 12:35:51 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 12:35:51 2011] Source does appear to be extended
[Fri Oct 28 12:35:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 12:36:09 2011] Writing source region out to fullrun_ccd2_acisf12211_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 28 12:36:09 2011] Extracting stamp from image fullrun_ccd2_acisf12211_pi14-548_cl_sm2.00.img.gz, (623, 335) - (1169, 880)
[Fri Oct 28 12:36:09 2011] Writing fullrun_ccd2_acisf12211_pi14-548_pass1_cl_src1.gif
[Fri Oct 28 12:36:11 2011] Size of ../../acisf12211/products/events/fullrun_ccd2_acisf12211_pi14-548_pass1_cl_src1_src.evt.gz[events] = 1155 counts
[Fri Oct 28 12:36:11 2011] Mean chipx,y = (677.28, 359.36)
[Fri Oct 28 12:36:11 2011] Mean tdetx,y = (3420.36, 3408.72)
[Fri Oct 28 12:36:11 2011] chipx,y range = (623.00-728.00, 303.00-413.00)
[Fri Oct 28 12:36:11 2011] Size of ../../acisf12211/products/events/fullrun_ccd2_acisf12211_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 686 counts
[Fri Oct 28 12:36:13 2011] rmf not found, will run specextract
[Fri Oct 28 12:36:13 2011] arf not found, will run specextract
[Fri Oct 28 12:36:43 2011] ../../acisf12211/products/spectra/fullrun_ccd2_acisf12211_pi14-548_pass1_cl_src1.warf not found
[Fri Oct 28 12:36:43 2011] ../../acisf12211/products/spectra/fullrun_ccd2_acisf12211_pi14-548_pass1_cl_src1.wrmf not found
[Fri Oct 28 12:36:43 2011] Removal of ../../acisf12211/products/spectra/fullrun_ccd2_acisf12211_pi14-548_pass1_cl_src1.soff failed
[Fri Oct 28 12:39:19 2011] Keeping rmf generated by specextract
[Fri Oct 28 12:39:19 2011] 152.978
[Fri Oct 28 12:50:39 2011] Updating aperture counts using extracted products
[Fri Oct 28 12:50:39 2011] Error reading totcts from fullrun_ccd2_acisf12211_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 28 12:50:39 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 12:50:39 2011] Using photon index=1.80, rate=0.0305, arf fullrun_ccd2_acisf12211_pi14-548_pass1_cl_src1.arf
[Fri Oct 28 12:50:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 12:50:39 2011] Updating source flux to 4.7e-13
[Fri Oct 28 12:50:52 2011] Reading fit data from acisf12211/analysis//spectral/fullrun_ccd2_acisf12211_pi14-548_pass1_cl_src1_pl.csv
[Fri Oct 28 12:50:52 2011] Spectral fit parameter nH value = 2.17751e+21
[Fri Oct 28 12:50:52 2011] Spectral fit parameter PhoIndex value = 0.90851
[Fri Oct 28 12:50:52 2011] Failed to get F(0.3-8.0) from acisf12211/analysis//spectral/fullrun_ccd2_acisf12211_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Oct 28 12:50:52 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 12:50:52 2011] Using Nh = 2.2e+21, photon index=0.91, rate=0.0305, arf fullrun_ccd2_acisf12211_pi14-548_pass1_cl_src1.arf
[Fri Oct 28 12:50:52 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 12:50:52 2011] Updating source flux to 6.6e-13