[Sat Oct  1 23:03:08 2011] Detection parameters:
  Position = (987.2, 887.2) = 0 49 11.12 -73 17 17.9
  Extent = 2.1" x 1.8", rotation angle = 87 degrees
  Source counts = 11.1 +/- 3.9
  Background counts = 3.9
  Rate = 0.0007 +/- 0.0002

[Sat Oct  1 23:03:08 2011] Off-axis axis estimate = 9.07'
[Sat Oct  1 23:03:47 2011] Using EEF radius (= 3.64 ")to estimate initial spatial extent for simple fitting
[Sat Oct  1 23:03:47 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct  1 23:03:47 2011] Initial guess for spatial extent in simple fitting = 3.64"
[Sat Oct  1 23:03:47 2011] source mask rpix=7.4, npix_max = 249, mask sum = 256, frac = 1.027
[Sat Oct  1 23:03:47 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 3.64"
[Sat Oct  1 23:03:48 2011] fullrun_ccd6_acisf12208_pi14-548_cl_pass0_src6.ximg exists
[Sat Oct  1 23:03:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12208_pi14-548_cl_pass0_src6.csv
[Sat Oct  1 23:03:48 2011] fullrun_ccd6_acisf12208_pi14-548_cl_pass0_src6_1.ximg exists
[Sat Oct  1 23:03:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12208_pi14-548_cl_pass0_src6.csv
[Sat Oct  1 23:03:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12208_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12208_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct  1 23:03:48 2011] fullrun_ccd6_acisf12208_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Sat Oct  1 23:03:48 2011] fullrun_ccd6_acisf12208_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Sat Oct  1 23:03:48 2011] Fit fullrun_ccd6_acisf12208_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Sat Oct  1 23:03:52 2011] Spatial fit model total counts = 29.967200, observed total counts = 30.000000
[Sat Oct  1 23:03:52 2011] Offset between fit and detection position for source 7 = 1.675674 pixels
[Sat Oct  1 23:03:52 2011] 30.059830 total counts/ 22.423900 bgd. counts: snr = 1.612525
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 1.675674 pixels
  Position = (987.8, 885.7) = 0 49 11.10 -73 17 18.9
  Extent = 1.0 (0.9-1.4)", rotation angle = 0
  Source counts = 7.6 +/- 5.5
  Background counts = 22.4
  Rate = 0.0005 +/- 0.0003
  Deleting source due to low Poisson probability