[Mon Oct 10 08:59:15 2011] Detection parameters:
  Position = (853.2, 1165.6) = 1 29 23.56 -73 31 60.0
  Extent = 0.6" x 0.5", rotation angle = 29 degrees
  Source counts = 15.5 +/- 4.0
  Background counts = 0.5
  Rate = 0.0009 +/- 0.0002

[Mon Oct 10 08:59:15 2011] Off-axis axis estimate = 1.28'
[Mon Oct 10 08:59:59 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Oct 10 08:59:59 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct 10 08:59:59 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.373
[Mon Oct 10 08:59:59 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.38"
[Mon Oct 10 08:59:59 2011] fullrun_ccd3_acisf12207_pi14-548_cl_pass0_src3.ximg exists
[Mon Oct 10 08:59:59 2011] fullrun_ccd3_acisf12207_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Oct 10 08:59:59 2011] Fit fullrun_ccd3_acisf12207_pi14-548_cl_pass0_src3 appears to have run properly
[Mon Oct 10 08:59:59 2011] fullrun_ccd3_acisf12207_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Oct 10 08:59:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12207_pi14-548_cl_pass0_tfrozen_src3.csv
[Mon Oct 10 08:59:59 2011] fullrun_ccd3_acisf12207_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Oct 10 08:59:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12207_pi14-548_cl_pass0_tfrozen_src3.csv
[Mon Oct 10 08:59:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12207_pi14-548_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12207_pi14-548_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 09:00:06 2011] Spatial fit model total counts = 13.374100, observed total counts = 16.000000
[Mon Oct 10 09:00:06 2011] Offset between fit and detection position for source 3 = 0.420208 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.420208 pixels
  Position = (853.5, 1166.0) = 1 29 23.59 -73 32 0.0
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 13.8 +/- 3.7
  Background counts = 0.0
  Rate = 0.0008 +/- 0.0002
[Mon Oct 10 09:00:06 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 09:00:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 09:00:06 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 09:00:06 2011] Source does appear to be extended
[Mon Oct 10 09:00:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 09:00:23 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 10 09:00:23 2011] Initial guess for spatial extent in simple fitting = 0.42"
[Mon Oct 10 09:00:23 2011] source mask rpix=0.9, npix_max = 7, mask sum = 6, frac = 0.819
[Mon Oct 10 09:00:23 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.42"
[Mon Oct 10 09:00:23 2011] fullrun_ccd3_acisf12207_pi14-548_cl_pass1_src3.ximg exists
[Mon Oct 10 09:00:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12207_pi14-548_cl_pass1_src3.csv
[Mon Oct 10 09:00:23 2011] fullrun_ccd3_acisf12207_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Oct 10 09:00:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12207_pi14-548_cl_pass1_src3.csv
[Mon Oct 10 09:00:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12207_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12207_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 09:00:23 2011] fullrun_ccd3_acisf12207_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Oct 10 09:00:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12207_pi14-548_cl_pass1_tfrozen_src3.csv
[Mon Oct 10 09:00:23 2011] fullrun_ccd3_acisf12207_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Oct 10 09:00:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12207_pi14-548_cl_pass1_tfrozen_src3.csv
[Mon Oct 10 09:00:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12207_pi14-548_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12207_pi14-548_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 10 09:00:28 2011] Spatial fit model total counts = 14.013800, observed total counts = 17.000000
[Mon Oct 10 09:00:28 2011] Offset between fit and detection position for source 3 = 0.024537 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.024537 pixels
  Position = (853.5, 1166.0) = 1 29 23.59 -73 32 0.0
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 15.0 +/- 3.9
  Background counts = 0.0
  Rate = 0.0009 +/- 0.0002
[Mon Oct 10 09:00:28 2011] Vigneting correction estimate = 1.000000
[Mon Oct 10 09:00:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 10 09:00:28 2011] Assessing source extent using major axis lower bound
[Mon Oct 10 09:00:28 2011] Source does appear to be extended
[Mon Oct 10 09:00:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 10 09:10:32 2011] Not overwriting source region fullrun_ccd3_acisf12207_pi14-548_pass1_cl_src3_src.reg
[Mon Oct 10 09:10:32 2011] Extracting stamp from image fullrun_ccd3_acisf12207_pi14-548_cl_sm2.00.img.gz, (835, 1148) - (872, 1184)
[Mon Oct 10 09:10:32 2011] Writing fullrun_ccd3_acisf12207_pi14-548_pass1_cl_src3.gif
[Mon Oct 10 09:11:32 2011] ../../acisf12207/products/events/fullrun_ccd3_acisf12207_pi14-548_pass1_cl_src3_src.evt and ../../acisf12207/products/events/fullrun_ccd3_acisf12207_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Mon Oct 10 09:11:32 2011] Size of ../../acisf12207/products/events/fullrun_ccd3_acisf12207_pi14-548_pass1_cl_src3_src.evt.gz[events] = 15 counts
[Mon Oct 10 09:11:32 2011] Mean chipx,y = (985.47, 881.47)
[Mon Oct 10 09:11:32 2011] Mean tdetx,y = (4250.53, 4046.47)
[Mon Oct 10 09:11:32 2011] chipx,y range = (970.00-1005.00, 864.00-897.00)
[Mon Oct 10 09:11:32 2011] Size of ../../acisf12207/products/events/fullrun_ccd3_acisf12207_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 5 counts
[Mon Oct 10 09:11:32 2011] ../../acisf12207/products/images/fullrun_ccd3_acisf12207_pi14-548_pass1_cl_src3_src.img and ../../acisf12207/products/images/fullrun_ccd3_acisf12207_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Mon Oct 10 09:11:32 2011] Not generating rmf since there are only 15 counts
[Mon Oct 10 09:11:32 2011] arf not found, will run specextract
[Mon Oct 10 09:11:59 2011] ../../acisf12207/products/spectra/fullrun_ccd3_acisf12207_pi14-548_pass1_cl_src3.warf not found
[Mon Oct 10 09:11:59 2011] ../../acisf12207/products/spectra/fullrun_ccd3_acisf12207_pi14-548_pass1_cl_src3.wrmf not found
[Mon Oct 10 09:11:59 2011] Removal of ../../acisf12207/products/spectra/fullrun_ccd3_acisf12207_pi14-548_pass1_cl_src3.soff failed
[Mon Oct 10 09:12:05 2011] ../../acisf12207/products/lightcurves/fullrun_ccd3_acisf12207_pi14-548_pass1_cl_src3_src.lc and ../../acisf12207/products/lightcurves/fullrun_ccd3_acisf12207_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Mon Oct 10 09:19:23 2011] Spectrum 3 has only 15 counts, deleting rmf
[Mon Oct 10 09:19:23 2011] 202.497
[Mon Oct 10 09:19:26 2011] Updating aperture counts using extracted products
[Mon Oct 10 09:19:26 2011] Error reading totcts from fullrun_ccd3_acisf12207_pi14-548_pass1_cl_src3_src.pi.gz
[Mon Oct 10 09:19:27 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 10 09:19:27 2011] Using photon index=1.80, rate=0.000863, arf fullrun_ccd3_acisf12207_pi14-548_pass1_cl_src3.arf
[Mon Oct 10 09:19:27 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 10 09:19:27 2011] Updating source flux to 9.7e-15
[Mon Oct 10 09:19:35 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting