[Sun Sep 25 16:17:34 2011] Detection parameters:
  Position = (466.9, 244.0) = 12 32 9.60 -2 26 19.2
  Extent = 1.1" x 0.6", rotation angle = 73 degrees
  Source counts = 10.5 +/- 3.6
  Background counts = 2.5
  Rate = 0.0002 +/- 7e-05

[Sun Sep 25 16:17:35 2011] Off-axis axis estimate = 2.98'
[Sun Sep 25 16:18:37 2011] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 16:18:37 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Sun Sep 25 16:18:37 2011] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.435
[Sun Sep 25 16:18:37 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 0.58"
[Sun Sep 25 16:18:41 2011] fullrun_ccd7_acisf12205_pi14-548_cl_pass0_src26.ximg exists
[Sun Sep 25 16:18:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12205_pi14-548_cl_pass0_src26.csv
[Sun Sep 25 16:18:41 2011] fullrun_ccd7_acisf12205_pi14-548_cl_pass0_src26_1.ximg exists
[Sun Sep 25 16:18:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12205_pi14-548_cl_pass0_src26.csv
[Sun Sep 25 16:18:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12205_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12205_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 16:18:41 2011] fullrun_ccd7_acisf12205_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Sun Sep 25 16:18:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12205_pi14-548_cl_pass0_tfrozen_src26.csv
[Sun Sep 25 16:18:41 2011] fullrun_ccd7_acisf12205_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Sun Sep 25 16:18:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12205_pi14-548_cl_pass0_tfrozen_src26.csv
[Sun Sep 25 16:18:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12205_pi14-548_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12205_pi14-548_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 16:18:54 2011] Source 28 is offset by -4.793629 and -5.639576 pixels which is larger than
2 X fitted extent = 0.584768 x 0.584768, not incorporating fit results
[Sun Sep 25 16:18:54 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 16:18:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 16:18:54 2011] Assessing source extent using major
[Sun Sep 25 16:18:54 2011] Source does appear to be extended
[Sun Sep 25 16:18:54 2011] Computing asymmetry using major and minor axis, asym = 1.82
[Sun Sep 25 16:18:54 2011] Source is asymmetric
[Sun Sep 25 16:18:54 2011] Deleting source due to low Poisson probability 0.9