[Sun Sep 25 16:17:32 2011] Detection parameters:
  Position = (806.4, 507.2) = 12 31 58.45 -2 24 9.7
  Extent = 0.6" x 0.5", rotation angle = 41 degrees
  Source counts = 12.3 +/- 3.9
  Background counts = 2.7
  Rate = 0.0002 +/- 7e-05

[Sun Sep 25 16:17:35 2011] Off-axis axis estimate = 1.12'
[Sun Sep 25 16:18:37 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 16:18:37 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sun Sep 25 16:18:37 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.925
[Sun Sep 25 16:18:37 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 0.38"
[Sun Sep 25 16:18:40 2011] fullrun_ccd7_acisf12205_pi14-548_cl_pass0_src20.ximg exists
[Sun Sep 25 16:18:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12205_pi14-548_cl_pass0_src20.csv
[Sun Sep 25 16:18:40 2011] fullrun_ccd7_acisf12205_pi14-548_cl_pass0_src20_1.ximg exists
[Sun Sep 25 16:18:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12205_pi14-548_cl_pass0_src20.csv
[Sun Sep 25 16:18:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12205_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12205_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 16:18:41 2011] fullrun_ccd7_acisf12205_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Sun Sep 25 16:18:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12205_pi14-548_cl_pass0_tfrozen_src20.csv
[Sun Sep 25 16:18:41 2011] fullrun_ccd7_acisf12205_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Sun Sep 25 16:18:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12205_pi14-548_cl_pass0_tfrozen_src20.csv
[Sun Sep 25 16:18:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12205_pi14-548_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12205_pi14-548_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 16:18:54 2011] Spatial fit model total counts = 16.687500, observed total counts = 21.000000
[Sun Sep 25 16:18:54 2011] Offset between fit and detection position for source 11 = 0.415487 pixels
[Sun Sep 25 16:18:54 2011] 16.448690 total counts/ 7.666020 bgd. counts: snr = 3.172061
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.415487 pixels
  Position = (806.8, 507.3) = 12 31 58.46 -2 24 9.9
  Extent = 0.7" x 0.4", rotation angle = 1
  Source counts = 8.8 +/- 4.1
  Background counts = 7.7
  Rate = 0.0002 +/- 8e-05
[Sun Sep 25 16:18:54 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 16:18:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 16:18:54 2011] Assessing source extent using major
[Sun Sep 25 16:18:54 2011] Source does appear to be extended
[Sun Sep 25 16:18:54 2011] Computing asymmetry using major and minor axis, asym = 1.60
[Sun Sep 25 16:18:54 2011] Source is asymmetric
[Sun Sep 25 16:18:54 2011] Deleting source due to low Poisson probability 0.9