[Sun Sep 25 16:17:30 2011] Detection parameters:
  Position = (679.1, 442.1) = 12 31 48.09 -2 32 31.1
  Extent = 2.2" x 1.3", rotation angle = 159 degrees
  Source counts = 15.3 +/- 4.5
  Background counts = 4.7
  Rate = 0.0003 +/- 9e-05

[Sun Sep 25 16:17:31 2011] Off-axis axis estimate = 7.69'
[Sun Sep 25 16:18:36 2011] Using EEF radius (= 2.62 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 16:18:36 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep 25 16:18:36 2011] Initial guess for spatial extent in simple fitting = 2.62"
[Sun Sep 25 16:18:36 2011] source mask rpix=5.3, npix_max = 135, mask sum = 144, frac = 1.064
[Sun Sep 25 16:18:36 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 2.62"
[Sun Sep 25 16:18:36 2011] fullrun_ccd6_acisf12205_pi14-548_cl_pass0_src5.ximg exists
[Sun Sep 25 16:18:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12205_pi14-548_cl_pass0_src5.csv
[Sun Sep 25 16:18:36 2011] fullrun_ccd6_acisf12205_pi14-548_cl_pass0_src5_1.ximg exists
[Sun Sep 25 16:18:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12205_pi14-548_cl_pass0_src5.csv
[Sun Sep 25 16:18:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12205_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12205_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 16:18:37 2011] fullrun_ccd6_acisf12205_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Sun Sep 25 16:18:37 2011] fullrun_ccd6_acisf12205_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Sep 25 16:18:37 2011] Fit fullrun_ccd6_acisf12205_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Sep 25 16:18:49 2011] Spatial fit model total counts = 34.929200, observed total counts = 30.000000
[Sun Sep 25 16:18:49 2011] Offset between fit and detection position for source 10 = 4.713940 pixels
[Sun Sep 25 16:18:49 2011] 34.484310 total counts/ 32.212400 bgd. counts: snr = 0.400294
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 4.713940 pixels
  Position = (675.3, 439.3) = 12 31 48.23 -2 32 32.7
  Extent = 1.5" x 1.5", rotation angle = 0
  Source counts = 2.3 +/- 5.9
  Background counts = 32.2
  Rate = 4e-05 +/- 0.0001
  Deleting source due to low Poisson probability