[Fri May 10 08:29:13 2013] Detection parameters:
  Position = (464.2, 1049.3) = 12 43 25.57 13 15 15.9
  Extent = 0.6" x 0.5", rotation angle = 24 degrees
  Source counts = 13.5 +/- 3.9
  Background counts = 1.5
  Rate = 0.0004 +/- 0.0001

[Fri May 10 08:29:13 2013] Off-axis axis estimate = 2.44'
[Fri May 10 09:27:15 2013] Using EEF radius (= 0.48 ")to estimate initial spatial extent for simple fitting
[Fri May 10 09:27:15 2013] Initial guess for spatial extent in simple fitting = 0.48"
[Fri May 10 09:27:15 2013] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.022
[Fri May 10 09:27:15 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 0.48"
[Fri May 10 09:53:11 2013] fullrun_ccd7_acisf12202_pi14-548_cl_pass0_src14.ximg exists
[Fri May 10 09:53:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12202_pi14-548_cl_pass0_src14.csv
[Fri May 10 09:53:11 2013] fullrun_ccd7_acisf12202_pi14-548_cl_pass0_src14_1.ximg exists
[Fri May 10 09:53:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12202_pi14-548_cl_pass0_src14.csv
[Fri May 10 09:53:11 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12202_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12202_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 09:53:11 2013] fullrun_ccd7_acisf12202_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Fri May 10 09:53:11 2013] fullrun_ccd7_acisf12202_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Fri May 10 09:53:11 2013] Fit fullrun_ccd7_acisf12202_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Fri May 10 09:53:18 2013] Spatial fit model total counts = 20.443600, observed total counts = 21.000000
[Fri May 10 09:53:18 2013] Offset between fit and detection position for source 22 = 0.870120 pixels
[Fri May 10 09:53:18 2013] 21.041800 total counts/ 9.319800 bgd. counts: snr = 3.839710
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.870120 pixels
  Position = (464.9, 1049.9) = 12 43 25.57 13 15 16.0
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 11.7 +/- 4.6
  Background counts = 9.3
  Rate = 0.0003 +/- 0.0001
[Fri May 10 09:53:18 2013] Vigneting correction estimate = 1.000000
[Fri May 10 09:53:18 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 09:53:18 2013] Assessing source extent using major axis lower bound
[Fri May 10 09:53:18 2013] Source does appear to be extended
[Fri May 10 09:53:18 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 10:40:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 10 10:40:00 2013] Initial guess for spatial extent in simple fitting = 0.32"
[Fri May 10 10:40:00 2013] source mask rpix=0.6, npix_max = 5, mask sum = 4, frac = 0.757
[Fri May 10 10:40:00 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 0.32"
[Fri May 10 11:01:24 2013] fullrun_ccd7_acisf12202_pi14-548_cl_pass1_src14.ximg exists
[Fri May 10 11:01:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12202_pi14-548_cl_pass1_src14.csv
[Fri May 10 11:01:24 2013] fullrun_ccd7_acisf12202_pi14-548_cl_pass1_src14_1.ximg exists
[Fri May 10 11:01:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf12202_pi14-548_cl_pass1_src14.csv
[Fri May 10 11:01:24 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf12202_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf12202_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 11:01:24 2013] fullrun_ccd7_acisf12202_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Fri May 10 11:01:24 2013] fullrun_ccd7_acisf12202_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Fri May 10 11:01:24 2013] Fit fullrun_ccd7_acisf12202_pi14-548_cl_pass1_tfrozen_src14 appears to have run properly
[Fri May 10 11:01:30 2013] Spatial fit model total counts = 20.998800, observed total counts = 21.000000
[Fri May 10 11:01:30 2013] Offset between fit and detection position for source 22 = 0.044782 pixels
[Fri May 10 11:01:30 2013] 21.591490 total counts/ 9.327290 bgd. counts: snr = 4.015702
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.044782 pixels
  Position = (464.8, 1049.9) = 12 43 25.57 13 15 15.9
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source counts = 12.3 +/- 4.6
  Background counts = 9.3
  Rate = 0.0003 +/- 0.0001
[Fri May 10 11:01:30 2013] Vigneting correction estimate = 1.000000
[Fri May 10 11:01:30 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 11:01:30 2013] Assessing source extent using major axis lower bound
[Fri May 10 11:01:30 2013] Source does appear to be extended
[Fri May 10 11:01:30 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 11:12:07 2013] Writing source region out to fullrun_ccd7_acisf12202_pi14-548_pass1_cl_src22_src.reg
[Fri May 10 11:12:07 2013] Extracting stamp from image fullrun_ccd7_acisf12202_pi14-548_cl_sm2.00.img.gz, (450, 1035) - (480, 1065)
[Fri May 10 11:12:07 2013] Writing fullrun_ccd7_acisf12202_pi14-548_pass1_cl_src22.gif
[Fri May 10 11:15:59 2013] Size of ../../acisf12202/products/events/fullrun_ccd7_acisf12202_pi14-548_pass1_cl_src22_src.evt.gz[events] = 13 counts
[Fri May 10 11:15:59 2013] Mean chipx,y = (175.46, 794.46)
[Fri May 10 11:15:59 2013] Mean tdetx,y = (4092.46, 2496.46)
[Fri May 10 11:15:59 2013] chipx,y range = (152.00-186.00, 781.00-814.00)
[Fri May 10 11:15:59 2013] Size of ../../acisf12202/products/events/fullrun_ccd7_acisf12202_pi14-548_pass1_cl_src22_bgd.evt.gz[events] = 8 counts
[Fri May 10 11:16:00 2013] Not generating rmf since there are only 12 counts
[Fri May 10 11:16:00 2013] arf not found, will run specextract
[Fri May 10 11:16:08 2013] ../../acisf12202/products/spectra/fullrun_ccd7_acisf12202_pi14-548_pass1_cl_src22.warf not found
[Fri May 10 11:16:08 2013] ../../acisf12202/products/spectra/fullrun_ccd7_acisf12202_pi14-548_pass1_cl_src22.wrmf not found
[Fri May 10 11:16:08 2013] Removal of ../../acisf12202/products/spectra/fullrun_ccd7_acisf12202_pi14-548_pass1_cl_src22.soff failed
[Fri May 10 11:21:13 2013] Spectrum 22 has only 12 counts, deleting rmf
[Fri May 10 11:21:13 2013] 228.952
[Fri May 10 11:21:19 2013] Updating aperture counts using extracted products
[Fri May 10 11:21:19 2013] Total counts from fullrun_ccd7_acisf12202_pi14-548_pass1_cl_src22_src.pi.gz = 13.00
[Fri May 10 11:21:19 2013] Total counts from fullrun_ccd7_acisf12202_pi14-548_pass1_cl_src22_bgd.pi.gz = 8.00
[Fri May 10 11:21:19 2013] Got source and background scale factors 0.000000, 0.000004
[Fri May 10 11:21:19 2013] User source parameters:
  Position = (464.8, 1049.9) = 12 43 25.57 13 15 15.9
  Extent = 0.3 (0.2-0.5)", rotation angle = 0
  Source aperture counts = 12.3 +/- 4.7
  Background aperture counts = 0.7
  Rate = 0.0003 +/- 0.0001

[Fri May 10 11:21:22 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 11:21:22 2013] Using photon index=1.80, rate=0.000335, arf fullrun_ccd7_acisf12202_pi14-548_pass1_cl_src22.arf
[Fri May 10 11:21:22 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Fri May 10 11:21:22 2013] Updating source flux to 2.6e-15
[Fri May 10 11:21:35 2013] Source 22 has fewer than 100.000000 counts, skipping spectral fitting