[Sat Sep 24 08:32:17 2011] Detection parameters:
  Position = (593.1, 342.6) = 0 49 48.18 -73 22 11.7
  Extent = 0.9" x 0.6", rotation angle = 50 degrees
  Source counts = 126.3 +/- 11.4
  Background counts = 4.7
  Rate = 0.005 +/- 0.0004

[Sat Sep 24 08:32:17 2011] Off-axis axis estimate = 5.39'
[Sat Sep 24 08:33:04 2011] Using EEF radius (= 1.34 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 08:33:04 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 08:33:04 2011] Initial guess for spatial extent in simple fitting = 1.34"
[Sat Sep 24 08:33:04 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.004
[Sat Sep 24 08:33:04 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.34"
[Sat Sep 24 08:33:05 2011] fullrun_ccd6_acisf12200_pi14-548_cl_pass0_src1.ximg exists
[Sat Sep 24 08:33:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12200_pi14-548_cl_pass0_src1.csv
[Sat Sep 24 08:33:05 2011] fullrun_ccd6_acisf12200_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Sep 24 08:33:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12200_pi14-548_cl_pass0_src1.csv
[Sat Sep 24 08:33:05 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12200_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12200_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 08:33:06 2011] fullrun_ccd6_acisf12200_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep 24 08:33:06 2011] fullrun_ccd6_acisf12200_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep 24 08:33:06 2011] Fit fullrun_ccd6_acisf12200_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Sep 24 08:33:18 2011] Spatial fit model total counts = 140.767000, observed total counts = 141.000000
[Sat Sep 24 08:33:18 2011] Offset between fit and detection position for source 9 = 1.222806 pixels
[Sat Sep 24 08:33:18 2011] 140.529090 total counts/ 9.928090 bgd. counts: snr = 41.448961
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.222806 pixels
  Position = (594.1, 343.3) = 0 49 48.13 -73 22 11.5
  Extent = 1.8 (1.5-2.1)", rotation angle = 0
  Source counts = 130.6 +/- 11.9
  Background counts = 9.9
  Rate = 0.005 +/- 0.0004
[Sat Sep 24 08:33:18 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 08:33:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 08:33:18 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 08:33:18 2011] Source does appear to be extended
[Sat Sep 24 08:33:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 08:33:41 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 08:33:41 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 08:33:41 2011] Initial guess for spatial extent in simple fitting = 1.80"
[Sat Sep 24 08:33:41 2011] source mask rpix=3.7, npix_max = 69, mask sum = 64, frac = 0.927
[Sat Sep 24 08:33:41 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.80"
[Sat Sep 24 08:33:41 2011] fullrun_ccd6_acisf12200_pi14-548_cl_pass1_src1.ximg exists
[Sat Sep 24 08:33:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12200_pi14-548_cl_pass1_src1.csv
[Sat Sep 24 08:33:41 2011] fullrun_ccd6_acisf12200_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Sep 24 08:33:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12200_pi14-548_cl_pass1_src1.csv
[Sat Sep 24 08:33:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12200_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12200_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 08:33:42 2011] fullrun_ccd6_acisf12200_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep 24 08:33:43 2011] fullrun_ccd6_acisf12200_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep 24 08:33:43 2011] Fit fullrun_ccd6_acisf12200_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep 24 08:33:56 2011] Spatial fit model total counts = 148.962000, observed total counts = 149.000000
[Sat Sep 24 08:33:56 2011] Offset between fit and detection position for source 9 = 0.218308 pixels
[Sat Sep 24 08:33:56 2011] 148.438200 total counts/ 10.756200 bgd. counts: snr = 41.980512
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.218308 pixels
  Position = (594.1, 343.5) = 0 49 48.12 -73 22 11.4
  Extent = 1.9 (1.6-2.2)", rotation angle = 0
  Source counts = 137.7 +/- 12.2
  Background counts = 10.8
  Rate = 0.005 +/- 0.0005
[Sat Sep 24 08:33:56 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 08:33:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 08:33:56 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 08:33:56 2011] Source does appear to be extended
[Sat Sep 24 08:33:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 08:35:02 2011] Not overwriting source region fullrun_ccd6_acisf12200_pi14-548_pass1_cl_src9_src.reg
[Sat Sep 24 08:35:02 2011] Extracting stamp from image fullrun_ccd6_acisf12200_pi14-548_cl_sm2.00.img.gz, (508, 258) - (680, 429)
[Sat Sep 24 08:35:02 2011] Writing fullrun_ccd6_acisf12200_pi14-548_pass1_cl_src9.gif
[Sat Sep 24 08:35:04 2011] ../../acisf12200/products/events/fullrun_ccd6_acisf12200_pi14-548_pass1_cl_src9_src.evt and ../../acisf12200/products/events/fullrun_ccd6_acisf12200_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sat Sep 24 08:35:04 2011] Size of ../../acisf12200/products/events/fullrun_ccd6_acisf12200_pi14-548_pass1_cl_src9_src.evt.gz[events] = 150 counts
[Sat Sep 24 08:35:04 2011] Mean chipx,y = (628.90, 243.43)
[Sat Sep 24 08:35:04 2011] Mean tdetx,y = (3503.90, 1945.43)
[Sat Sep 24 08:35:04 2011] chipx,y range = (606.00-656.00, 217.00-271.00)
[Sat Sep 24 08:35:04 2011] Size of ../../acisf12200/products/events/fullrun_ccd6_acisf12200_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 60 counts
[Sat Sep 24 08:35:04 2011] ../../acisf12200/products/images/fullrun_ccd6_acisf12200_pi14-548_pass1_cl_src9_src.img and ../../acisf12200/products/images/fullrun_ccd6_acisf12200_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Sat Sep 24 08:35:04 2011] ../../acisf12200/products/spectra/fullrun_ccd6_acisf12200_pi14-548_pass1_cl_src9_src.pi and ../../acisf12200/products/spectra/fullrun_ccd6_acisf12200_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Sat Sep 24 08:35:08 2011] ../../acisf12200/products/lightcurves/fullrun_ccd6_acisf12200_pi14-548_pass1_cl_src9_src.lc and ../../acisf12200/products/lightcurves/fullrun_ccd6_acisf12200_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sat Sep 24 08:35:31 2011] Keeping rmf generated by specextract
[Sat Sep 24 08:35:31 2011] 191.068
[Sat Sep 24 08:36:47 2011] Updating aperture counts using extracted products
[Sat Sep 24 08:36:47 2011] Error reading totcts from fullrun_ccd6_acisf12200_pi14-548_pass1_cl_src9_src.pi.gz
[Sat Sep 24 08:36:47 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 08:36:47 2011] Using photon index=1.80, rate=0.00515, arf fullrun_ccd6_acisf12200_pi14-548_pass1_cl_src9.arf
[Sat Sep 24 08:36:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 08:36:47 2011] Updating source flux to 6.4e-14
[Sat Sep 24 08:37:04 2011] Reading fit data from acisf12200/analysis//spectral/fullrun_ccd6_acisf12200_pi14-548_pass1_cl_src9_pl.csv
[Sat Sep 24 08:37:04 2011] Spectral fit parameter nH value = 2.41656e+21
[Sat Sep 24 08:37:04 2011] Spectral fit parameter PhoIndex value = 1.22806
[Sat Sep 24 08:37:04 2011] Failed to get F(0.3-8.0) from acisf12200/analysis//spectral/fullrun_ccd6_acisf12200_pi14-548_pass1_cl_src9_pl.csv, possibly due to different flux energy range selected
[Sat Sep 24 08:37:04 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 08:37:04 2011] Using Nh = 2.4e+21, photon index=1.23, rate=0.00515, arf fullrun_ccd6_acisf12200_pi14-548_pass1_cl_src9.arf
[Sat Sep 24 08:37:04 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 08:37:04 2011] Updating source flux to 7.8e-14