[Sat Sep 24 08:32:13 2011] Detection parameters:
  Position = (1080.5, 800.2) = 0 51 52.16 -73 10 34.2
  Extent = 3.2" x 2.8", rotation angle = 90 degrees
  Source counts = 989.9 +/- 35.1
  Background counts = 242.1
  Rate = 0.04 +/- 0.001

[Sat Sep 24 08:32:14 2011] Off-axis axis estimate = 11.56'
[Sat Sep 24 08:33:03 2011] Using EEF radius (= 5.95 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 08:33:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 08:33:03 2011] Initial guess for spatial extent in simple fitting = 5.95"
[Sat Sep 24 08:33:03 2011] source mask rpix=12.1, npix_max = 635, mask sum = 625, frac = 0.984
[Sat Sep 24 08:33:03 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 5.95"
[Sat Sep 24 08:33:03 2011] fullrun_ccd3_acisf12200_pi14-548_cl_pass0_src1.ximg exists
[Sat Sep 24 08:33:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12200_pi14-548_cl_pass0_src1.csv
[Sat Sep 24 08:33:03 2011] fullrun_ccd3_acisf12200_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Sep 24 08:33:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12200_pi14-548_cl_pass0_src1.csv
[Sat Sep 24 08:33:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12200_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12200_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 08:33:03 2011] fullrun_ccd3_acisf12200_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Sep 24 08:33:04 2011] fullrun_ccd3_acisf12200_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Sep 24 08:33:04 2011] Fit fullrun_ccd3_acisf12200_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Sep 24 08:33:17 2011] Spatial fit model total counts = 1307.210000, observed total counts = 1316.000000
[Sat Sep 24 08:33:17 2011] Offset between fit and detection position for source 7 = 0.391335 pixels
[Sat Sep 24 08:33:17 2011] 1306.392200 total counts/ 48.012200 bgd. counts: snr = 181.608430
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.391335 pixels
  Position = (1080.9, 800.2) = 0 51 52.17 -73 10 34.5
  Extent = 6.2 (6.0-6.4)", rotation angle = 0
  Source counts = 1258.4 +/- 36.1
  Background counts = 48.0
  Rate = 0.05 +/- 0.001
[Sat Sep 24 08:33:17 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 08:33:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 08:33:17 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 08:33:17 2011] Source does appear to be extended
[Sat Sep 24 08:33:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 08:33:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 08:33:39 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Sep 24 08:33:39 2011] Initial guess for spatial extent in simple fitting = 6.20"
[Sat Sep 24 08:33:39 2011] source mask rpix=12.6, npix_max = 685, mask sum = 676, frac = 0.986
[Sat Sep 24 08:33:39 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.20"
[Sat Sep 24 08:33:40 2011] fullrun_ccd3_acisf12200_pi14-548_cl_pass1_src1.ximg exists
[Sat Sep 24 08:33:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12200_pi14-548_cl_pass1_src1.csv
[Sat Sep 24 08:33:40 2011] fullrun_ccd3_acisf12200_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Sep 24 08:33:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12200_pi14-548_cl_pass1_src1.csv
[Sat Sep 24 08:33:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12200_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12200_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 08:33:40 2011] fullrun_ccd3_acisf12200_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Sep 24 08:33:40 2011] fullrun_ccd3_acisf12200_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Sep 24 08:33:40 2011] Fit fullrun_ccd3_acisf12200_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep 24 08:33:53 2011] Spatial fit model total counts = 1299.530000, observed total counts = 1317.000000
[Sat Sep 24 08:33:53 2011] Offset between fit and detection position for source 7 = 0.021950 pixels
[Sat Sep 24 08:33:53 2011] 1298.696400 total counts/ 41.906400 bgd. counts: snr = 194.143359
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.021950 pixels
  Position = (1080.9, 800.1) = 0 51 52.17 -73 10 34.5
  Extent = 6.2 (6.0-6.5)", rotation angle = 0
  Source counts = 1256.8 +/- 36.0
  Background counts = 41.9
  Rate = 0.05 +/- 0.001
[Sat Sep 24 08:33:53 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 08:33:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 08:33:53 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 08:33:53 2011] Source does appear to be extended
[Sat Sep 24 08:33:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 08:34:35 2011] Not overwriting source region fullrun_ccd3_acisf12200_pi14-548_pass1_cl_src7_src.reg
[Sat Sep 24 08:34:35 2011] Extracting stamp from image fullrun_ccd3_acisf12200_pi14-548_cl_sm2.00.img.gz, (796, 515) - (1269, 1085)
[Sat Sep 24 08:34:35 2011] Writing fullrun_ccd3_acisf12200_pi14-548_pass1_cl_src7.gif
[Sat Sep 24 08:34:38 2011] ../../acisf12200/products/events/fullrun_ccd3_acisf12200_pi14-548_pass1_cl_src7_src.evt and ../../acisf12200/products/events/fullrun_ccd3_acisf12200_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Sat Sep 24 08:34:39 2011] Size of ../../acisf12200/products/events/fullrun_ccd3_acisf12200_pi14-548_pass1_cl_src7_src.evt.gz[events] = 1308 counts
[Sat Sep 24 08:34:39 2011] Mean chipx,y = (552.39, 984.77)
[Sat Sep 24 08:34:39 2011] Mean tdetx,y = (4147.23, 3613.39)
[Sat Sep 24 08:34:39 2011] chipx,y range = (490.00-608.00, 931.00-1022.00)
[Sat Sep 24 08:34:39 2011] Size of ../../acisf12200/products/events/fullrun_ccd3_acisf12200_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 427 counts
[Sat Sep 24 08:34:39 2011] ../../acisf12200/products/images/fullrun_ccd3_acisf12200_pi14-548_pass1_cl_src7_src.img and ../../acisf12200/products/images/fullrun_ccd3_acisf12200_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Sat Sep 24 08:34:39 2011] ../../acisf12200/products/spectra/fullrun_ccd3_acisf12200_pi14-548_pass1_cl_src7_src.pi and ../../acisf12200/products/spectra/fullrun_ccd3_acisf12200_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Sat Sep 24 08:34:42 2011] ../../acisf12200/products/lightcurves/fullrun_ccd3_acisf12200_pi14-548_pass1_cl_src7_src.lc and ../../acisf12200/products/lightcurves/fullrun_ccd3_acisf12200_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Sat Sep 24 08:35:00 2011] Keeping rmf generated by specextract
[Sat Sep 24 08:35:00 2011] 148.039
[Sat Sep 24 08:36:47 2011] Updating aperture counts using extracted products
[Sat Sep 24 08:36:47 2011] Error reading totcts from fullrun_ccd3_acisf12200_pi14-548_pass1_cl_src7_src.pi.gz
[Sat Sep 24 08:36:47 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 08:36:47 2011] Using photon index=1.80, rate=0.047, arf fullrun_ccd3_acisf12200_pi14-548_pass1_cl_src7.arf
[Sat Sep 24 08:36:47 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 08:36:47 2011] Updating source flux to 7.5e-13
[Sat Sep 24 08:36:59 2011] Reading fit data from acisf12200/analysis//spectral/fullrun_ccd3_acisf12200_pi14-548_pass1_cl_src7_pl.csv
[Sat Sep 24 08:36:59 2011] Spectral fit parameter nH value = 2.67228e+14
[Sat Sep 24 08:36:59 2011] Spectral fit parameter PhoIndex value = 1.07779
[Sat Sep 24 08:36:59 2011] Failed to get F(0.3-8.0) from acisf12200/analysis//spectral/fullrun_ccd3_acisf12200_pi14-548_pass1_cl_src7_pl.csv, possibly due to different flux energy range selected
[Sat Sep 24 08:36:59 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 08:36:59 2011] Using Nh = 2.7e+14, photon index=1.08, rate=0.047, arf fullrun_ccd3_acisf12200_pi14-548_pass1_cl_src7.arf
[Sat Sep 24 08:36:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 08:36:59 2011] Updating source flux to 9e-13