[Mon Dec 19 11:47:00 2011] Detection parameters:
  Position = (1168.7, 478.0) = 3 10 19.72 -20 40 41.3
  Extent = 0.7" x 0.5", rotation angle = 102 degrees
  Source counts = 45.5 +/- 6.9
  Background counts = 2.5
  Rate = 0.001 +/- 0.0001

[Mon Dec 19 11:47:00 2011] Off-axis axis estimate = 4.44'
[Mon Dec 19 12:31:59 2011] Using EEF radius (= 0.97 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 12:31:59 2011] Initial guess for spatial extent in simple fitting = 0.97"
[Mon Dec 19 12:31:59 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.019
[Mon Dec 19 12:31:59 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 0.97"
[Mon Dec 19 12:52:18 2011] fullrun_ccd6_acisf12198_pi14-548_cl_pass0_src6.ximg exists
[Mon Dec 19 12:52:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12198_pi14-548_cl_pass0_src6.csv
[Mon Dec 19 12:52:18 2011] fullrun_ccd6_acisf12198_pi14-548_cl_pass0_src6_1.ximg exists
[Mon Dec 19 12:52:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12198_pi14-548_cl_pass0_src6.csv
[Mon Dec 19 12:52:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12198_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12198_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 12:52:18 2011] fullrun_ccd6_acisf12198_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Mon Dec 19 12:52:18 2011] fullrun_ccd6_acisf12198_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Dec 19 12:52:18 2011] Fit fullrun_ccd6_acisf12198_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Mon Dec 19 13:39:06 2011] Spatial fit model total counts = 44.679100, observed total counts = 51.000000
[Mon Dec 19 13:39:06 2011] Offset between fit and detection position for source 5 = 0.614725 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.614725 pixels
  Position = (1168.8, 477.3) = 3 10 19.73 -20 40 41.9
  Extent = 1.9" x 1.0", rotation angle = 94
  Source counts = 44.7 +/- 6.7
  Background counts = 0.0
  Rate = 0.001 +/- 0.0001
[Mon Dec 19 13:39:06 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 13:39:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 13:39:06 2011] Assessing source extent using major
[Mon Dec 19 13:39:06 2011] Source does appear to be extended
[Mon Dec 19 13:39:06 2011] Computing asymmetry using major and minor axis, asym = 1.83
[Mon Dec 19 13:39:06 2011] Source is asymmetric
[Mon Dec 19 14:23:52 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Dec 19 14:23:52 2011] Initial guess for spatial extent in simple fitting = 1.44"
[Mon Dec 19 14:23:52 2011] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.039
[Mon Dec 19 14:23:52 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 1.44"
[Mon Dec 19 14:45:07 2011] fullrun_ccd6_acisf12198_pi14-548_cl_pass1_src6.ximg exists
[Mon Dec 19 14:45:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12198_pi14-548_cl_pass1_src6.csv
[Mon Dec 19 14:45:07 2011] fullrun_ccd6_acisf12198_pi14-548_cl_pass1_src6_1.ximg exists
[Mon Dec 19 14:45:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12198_pi14-548_cl_pass1_src6.csv
[Mon Dec 19 14:45:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12198_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12198_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 14:45:07 2011] fullrun_ccd6_acisf12198_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Mon Dec 19 14:45:07 2011] fullrun_ccd6_acisf12198_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Dec 19 14:45:07 2011] Fit fullrun_ccd6_acisf12198_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Mon Dec 19 15:28:19 2011] Spatial fit model total counts = 51.528200, observed total counts = 53.000000
[Mon Dec 19 15:28:19 2011] Offset between fit and detection position for source 5 = 0.055433 pixels
[Mon Dec 19 15:28:19 2011] 51.913550 total counts/ 4.226150 bgd. counts: snr = 23.196966
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.055433 pixels
  Position = (1168.8, 477.4) = 3 10 19.73 -20 40 41.9
  Extent = 1.2 (1.0-1.5)", rotation angle = 0
  Source counts = 47.7 +/- 7.2
  Background counts = 4.2
  Rate = 0.001 +/- 0.0002
[Mon Dec 19 15:28:19 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 15:28:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 15:28:19 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 15:28:19 2011] Source does appear to be extended
[Mon Dec 19 15:28:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 15:34:40 2011] Writing source region out to fullrun_ccd6_acisf12198_pi14-548_pass1_cl_src5_src.reg
[Mon Dec 19 15:34:40 2011] Extracting stamp from image fullrun_ccd6_acisf12198_pi14-548_cl_sm2.00.img.gz, (1113, 422) - (1224, 533)
[Mon Dec 19 15:34:40 2011] Writing fullrun_ccd6_acisf12198_pi14-548_pass1_cl_src5.gif
[Mon Dec 19 15:37:39 2011] Size of ../../acisf12198/products/events/fullrun_ccd6_acisf12198_pi14-548_pass1_cl_src5_src.evt.gz[events] = 53 counts
[Mon Dec 19 15:37:39 2011] Mean chipx,y = (865.47, 901.13)
[Mon Dec 19 15:37:39 2011] Mean tdetx,y = (3740.47, 2603.13)
[Mon Dec 19 15:37:39 2011] chipx,y range = (846.00-886.00, 882.00-920.00)
[Mon Dec 19 15:37:39 2011] Size of ../../acisf12198/products/events/fullrun_ccd6_acisf12198_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 48 counts
[Mon Dec 19 15:37:41 2011] Not generating rmf since there are only 47 counts
[Mon Dec 19 15:37:41 2011] arf not found, will run specextract
[Mon Dec 19 15:38:12 2011] ../../acisf12198/products/spectra/fullrun_ccd6_acisf12198_pi14-548_pass1_cl_src5.warf not found
[Mon Dec 19 15:38:12 2011] ../../acisf12198/products/spectra/fullrun_ccd6_acisf12198_pi14-548_pass1_cl_src5.wrmf not found
[Mon Dec 19 15:38:12 2011] Removal of ../../acisf12198/products/spectra/fullrun_ccd6_acisf12198_pi14-548_pass1_cl_src5.soff failed
[Mon Dec 19 15:44:27 2011] Spectrum 5 has only 48 counts, deleting rmf
[Mon Dec 19 15:44:27 2011] 194.844
[Mon Dec 19 15:58:17 2011] Updating aperture counts using extracted products
[Mon Dec 19 15:58:17 2011] Error reading totcts from fullrun_ccd6_acisf12198_pi14-548_pass1_cl_src5_src.pi.gz
[Mon Dec 19 15:58:17 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 15:58:17 2011] Using photon index=1.80, rate=0.00103, arf fullrun_ccd6_acisf12198_pi14-548_pass1_cl_src5.arf
[Mon Dec 19 15:58:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Dec 19 15:58:17 2011] Updating source flux to 1.2e-14
[Mon Dec 19 15:58:23 2011] Source 5 has fewer than 100.000000 counts, skipping spectral fitting