[Mon Dec 19 11:47:00 2011] Detection parameters:
  Position = (178.3, 970.5) = 3 10 54.42 -20 36 38.7
  Extent = 3.2" x 2.8", rotation angle = 56 degrees
  Source counts = 131.4 +/- 13.3
  Background counts = 46.6
  Rate = 0.003 +/- 0.0003

[Mon Dec 19 11:47:00 2011] Off-axis axis estimate = 9.50'
[Mon Dec 19 12:31:59 2011] Using EEF radius (= 4.00 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 12:31:59 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 19 12:31:59 2011] Initial guess for spatial extent in simple fitting = 4.00"
[Mon Dec 19 12:31:59 2011] source mask rpix=8.1, npix_max = 297, mask sum = 289, frac = 0.972
[Mon Dec 19 12:31:59 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 4.00"
[Mon Dec 19 12:52:18 2011] fullrun_ccd6_acisf12198_pi14-548_cl_pass0_src3.ximg exists
[Mon Dec 19 12:52:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12198_pi14-548_cl_pass0_src3.csv
[Mon Dec 19 12:52:18 2011] fullrun_ccd6_acisf12198_pi14-548_cl_pass0_src3_1.ximg exists
[Mon Dec 19 12:52:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12198_pi14-548_cl_pass0_src3.csv
[Mon Dec 19 12:52:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12198_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12198_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 12:52:18 2011] fullrun_ccd6_acisf12198_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Mon Dec 19 12:52:18 2011] fullrun_ccd6_acisf12198_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Dec 19 12:52:18 2011] Fit fullrun_ccd6_acisf12198_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Dec 19 13:39:06 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 44.648731 pixels away
[Mon Dec 19 13:39:06 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 13:39:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 13:39:06 2011] Assessing source extent using major
[Mon Dec 19 13:39:06 2011] Source does appear to be extended
[Mon Dec 19 13:39:06 2011] Computing asymmetry using major and minor axis, asym = 1.17
[Mon Dec 19 14:23:52 2011] Using EEF radius (= 4.00 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 14:23:52 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 19 14:23:52 2011] Initial guess for spatial extent in simple fitting = 4.00"
[Mon Dec 19 14:23:52 2011] source mask rpix=8.1, npix_max = 297, mask sum = 289, frac = 0.972
[Mon Dec 19 14:23:52 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 4.00"
[Mon Dec 19 14:45:07 2011] fullrun_ccd6_acisf12198_pi14-548_cl_pass1_src3.ximg exists
[Mon Dec 19 14:45:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12198_pi14-548_cl_pass1_src3.csv
[Mon Dec 19 14:45:07 2011] fullrun_ccd6_acisf12198_pi14-548_cl_pass1_src3_1.ximg exists
[Mon Dec 19 14:45:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf12198_pi14-548_cl_pass1_src3.csv
[Mon Dec 19 14:45:07 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf12198_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf12198_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 14:45:07 2011] fullrun_ccd6_acisf12198_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Mon Dec 19 14:45:07 2011] fullrun_ccd6_acisf12198_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Dec 19 14:45:07 2011] Fit fullrun_ccd6_acisf12198_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Dec 19 15:28:19 2011] Spatial fit model total counts = 171.280000, observed total counts = 172.000000
[Mon Dec 19 15:28:19 2011] Offset between fit and detection position for source 2 = 5.213897 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 5.213897 pixels
  Position = (181.7, 974.4) = 3 10 54.32 -20 36 37.0
  Extent = 5.9 (4.6-6.8)", rotation angle = 0
  Source counts = 170.2 +/- 13.0
  Background counts = 0.0
  Rate = 0.004 +/- 0.0003
[Mon Dec 19 15:28:19 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 15:28:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 15:28:19 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 15:28:19 2011] Source does appear to be extended
[Mon Dec 19 15:28:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 15:34:40 2011] Writing source region out to fullrun_ccd6_acisf12198_pi14-548_pass1_cl_src2_src.reg
[Mon Dec 19 15:34:40 2011] Extracting stamp from image fullrun_ccd6_acisf12198_pi14-548_cl_sm2.00.img.gz, (0, 705) - (451, 1244)
[Mon Dec 19 15:34:40 2011] Writing fullrun_ccd6_acisf12198_pi14-548_pass1_cl_src2.gif
[Mon Dec 19 15:35:57 2011] Size of ../../acisf12198/products/events/fullrun_ccd6_acisf12198_pi14-548_pass1_cl_src2_src.evt.gz[events] = 224 counts
[Mon Dec 19 15:35:57 2011] Mean chipx,y = (163.49, 45.43)
[Mon Dec 19 15:35:57 2011] Mean tdetx,y = (3038.49, 1747.43)
[Mon Dec 19 15:35:57 2011] chipx,y range = (114.00-216.00, 5.00-93.00)
[Mon Dec 19 15:35:57 2011] Size of ../../acisf12198/products/events/fullrun_ccd6_acisf12198_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 481 counts
[Mon Dec 19 15:35:58 2011] rmf not found, will run specextract
[Mon Dec 19 15:35:58 2011] arf not found, will run specextract
[Mon Dec 19 15:36:06 2011] ../../acisf12198/products/spectra/fullrun_ccd6_acisf12198_pi14-548_pass1_cl_src2.warf not found
[Mon Dec 19 15:36:06 2011] ../../acisf12198/products/spectra/fullrun_ccd6_acisf12198_pi14-548_pass1_cl_src2.wrmf not found
[Mon Dec 19 15:36:06 2011] Removal of ../../acisf12198/products/spectra/fullrun_ccd6_acisf12198_pi14-548_pass1_cl_src2.soff failed
[Mon Dec 19 15:44:27 2011] Keeping rmf generated by specextract
[Mon Dec 19 15:44:27 2011] 162.437
[Mon Dec 19 15:58:17 2011] Updating aperture counts using extracted products
[Mon Dec 19 15:58:17 2011] Error reading totcts from fullrun_ccd6_acisf12198_pi14-548_pass1_cl_src2_src.pi.gz
[Mon Dec 19 15:58:17 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 15:58:17 2011] Using photon index=1.80, rate=0.00366, arf fullrun_ccd6_acisf12198_pi14-548_pass1_cl_src2.arf
[Mon Dec 19 15:58:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Dec 19 15:58:17 2011] Updating source flux to 5.2e-14