[Wed Sep 28 07:06:59 2011] Detection parameters:
  Position = (443.2, 437.6) = 3 7 22.01 -62 28 2.1
  Extent = 0.7" x 0.5", rotation angle = 44 degrees
  Source counts = 13.6 +/- 3.7
  Background counts = 0.4
  Rate = 0.0005 +/- 0.0002

[Wed Sep 28 07:07:01 2011] Off-axis axis estimate = 5.39'
[Wed Sep 28 07:07:45 2011] Using EEF radius (= 1.34 ")to estimate initial spatial extent for simple fitting
[Wed Sep 28 07:07:45 2011] Initial guess for spatial extent in simple fitting = 1.34"
[Wed Sep 28 07:07:45 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.006
[Wed Sep 28 07:07:45 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 1.34"
[Wed Sep 28 07:07:45 2011] fullrun_ccd3_acisf12191_pi14-548_cl_pass0_src7.ximg exists
[Wed Sep 28 07:07:45 2011] fullrun_ccd3_acisf12191_pi14-548_cl_pass0_src7_1.ximg exists
[Wed Sep 28 07:07:45 2011] Fit fullrun_ccd3_acisf12191_pi14-548_cl_pass0_src7 appears to have run properly
[Wed Sep 28 07:07:45 2011] fullrun_ccd3_acisf12191_pi14-548_cl_pass0_tfrozen_src7.ximg exists
[Wed Sep 28 07:07:45 2011] fullrun_ccd3_acisf12191_pi14-548_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Sep 28 07:07:45 2011] Fit fullrun_ccd3_acisf12191_pi14-548_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Sep 28 07:07:55 2011] Spatial fit model total counts = 23.347700, observed total counts = 21.000000
[Wed Sep 28 07:07:55 2011] Offset between fit and detection position for source 1 = 2.745795 pixels
[Wed Sep 28 07:07:55 2011] 24.901150 total counts/ 4.501150 bgd. counts: snr = 9.615424
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.745795 pixels
  Position = (442.1, 435.1) = 3 7 22.12 -62 28 3.5
  Extent = 1.6" x 0.8", rotation angle = 140
  Source counts = 20.4 +/- 5.0
  Background counts = 4.5
  Rate = 0.0008 +/- 0.0002
[Wed Sep 28 07:07:55 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 07:07:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 07:07:55 2011] Assessing source extent using major
[Wed Sep 28 07:07:55 2011] Source does appear to be extended
[Wed Sep 28 07:07:55 2011] Computing asymmetry using major and minor axis, asym = 1.94
[Wed Sep 28 07:07:55 2011] Source is asymmetric
[Wed Sep 28 07:08:18 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 28 07:08:18 2011] Initial guess for spatial extent in simple fitting = 1.20"
[Wed Sep 28 07:08:18 2011] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.044
[Wed Sep 28 07:08:18 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 1.20"
[Wed Sep 28 07:08:19 2011] fullrun_ccd3_acisf12191_pi14-548_cl_pass1_src7.ximg exists
[Wed Sep 28 07:08:19 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12191_pi14-548_cl_pass1_src7.csv
[Wed Sep 28 07:08:19 2011] fullrun_ccd3_acisf12191_pi14-548_cl_pass1_src7_1.ximg exists
[Wed Sep 28 07:08:19 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf12191_pi14-548_cl_pass1_src7.csv
[Wed Sep 28 07:08:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12191_pi14-548_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12191_pi14-548_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 07:08:20 2011] fullrun_ccd3_acisf12191_pi14-548_cl_pass1_tfrozen_src7.ximg exists
[Wed Sep 28 07:08:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12191_pi14-548_cl_pass1_tfrozen_src7.csv
[Wed Sep 28 07:08:20 2011] fullrun_ccd3_acisf12191_pi14-548_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Sep 28 07:08:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12191_pi14-548_cl_pass1_tfrozen_src7.csv
[Wed Sep 28 07:08:20 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12191_pi14-548_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12191_pi14-548_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 28 07:08:29 2011] Source 1 is offset by -0.739957 and -2.377130 pixels which is larger than
2 X fitted extent = 1.485520 x 1.485520, not incorporating fit results
[Wed Sep 28 07:08:29 2011] Vigneting correction estimate = 1.000000
[Wed Sep 28 07:08:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 28 07:08:29 2011] Assessing source extent using major
[Wed Sep 28 07:08:29 2011] Source does appear to be extended
[Wed Sep 28 07:08:29 2011] Computing asymmetry using major and minor axis, asym = 1.94
[Wed Sep 28 07:08:29 2011] Source is asymmetric
[Wed Sep 28 07:10:21 2011] Not overwriting source region fullrun_ccd3_acisf12191_pi14-548_pass1_cl_src1_src.reg
[Wed Sep 28 07:10:21 2011] Extracting stamp from image fullrun_ccd3_acisf12191_pi14-548_cl_sm2.00.img.gz, (370, 363) - (514, 507)
[Wed Sep 28 07:10:21 2011] Writing fullrun_ccd3_acisf12191_pi14-548_pass1_cl_src1.gif
[Wed Sep 28 07:10:47 2011] ../../acisf12191/products/events/fullrun_ccd3_acisf12191_pi14-548_pass1_cl_src1_src.evt and ../../acisf12191/products/events/fullrun_ccd3_acisf12191_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Sep 28 07:10:47 2011] Size of ../../acisf12191/products/events/fullrun_ccd3_acisf12191_pi14-548_pass1_cl_src1_src.evt.gz[events] = 17 counts
[Wed Sep 28 07:10:47 2011] Mean chipx,y = (625.53, 356.12)
[Wed Sep 28 07:10:47 2011] Mean tdetx,y = (4775.88, 3686.53)
[Wed Sep 28 07:10:47 2011] chipx,y range = (605.00-641.00, 340.00-376.00)
[Wed Sep 28 07:10:47 2011] Size of ../../acisf12191/products/events/fullrun_ccd3_acisf12191_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 40 counts
[Wed Sep 28 07:10:47 2011] ../../acisf12191/products/images/fullrun_ccd3_acisf12191_pi14-548_pass1_cl_src1_src.img and ../../acisf12191/products/images/fullrun_ccd3_acisf12191_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Sep 28 07:10:47 2011] ../../acisf12191/products/spectra/fullrun_ccd3_acisf12191_pi14-548_pass1_cl_src1_src.pi and ../../acisf12191/products/spectra/fullrun_ccd3_acisf12191_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Sep 28 07:10:47 2011] Not generating rmf since there are only 20 counts
[Wed Sep 28 07:10:55 2011] ../../acisf12191/products/lightcurves/fullrun_ccd3_acisf12191_pi14-548_pass1_cl_src1_src.lc and ../../acisf12191/products/lightcurves/fullrun_ccd3_acisf12191_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Sep 28 07:11:38 2011] 187.046
[Wed Sep 28 07:11:46 2011] Updating aperture counts using extracted products
[Wed Sep 28 07:11:46 2011] Error reading totcts from fullrun_ccd3_acisf12191_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Sep 28 07:11:46 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 28 07:11:46 2011] Using photon index=1.80, rate=0.000825, arf fullrun_ccd3_acisf12191_pi14-548_pass1_cl_src1.arf
[Wed Sep 28 07:11:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 28 07:11:46 2011] Updating source flux to 1.1e-14
[Wed Sep 28 07:11:56 2011] Flag b found in src. 1 procflags, skipping spectral fitting
[Wed Sep 28 07:11:56 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting