[Tue Feb 14 22:54:51 2012] Detection parameters:
  Position = (580.3, 809.4) = 9 21 44.15 29 28 56.2
  Extent = 0.8" x 0.5", rotation angle = 179 degrees
  Source counts = 11.8 +/- 3.5
  Background counts = 0.2
  Rate = 0.001 +/- 0.0004

[Tue Feb 14 22:54:51 2012] Off-axis axis estimate = 4.93'
[Tue Feb 14 23:08:40 2012] Using EEF radius (= 1.15 ")to estimate initial spatial extent for simple fitting
[Tue Feb 14 23:08:40 2012] Initial guess for spatial extent in simple fitting = 1.15"
[Tue Feb 14 23:08:40 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.927
[Tue Feb 14 23:08:40 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 1.15"
[Tue Feb 14 23:14:20 2012] fullrun_ccd1_acisf12187_pi14-548_cl_pass0_src2.ximg exists
[Tue Feb 14 23:14:20 2012] fullrun_ccd1_acisf12187_pi14-548_cl_pass0_src2_1.ximg exists
[Tue Feb 14 23:14:20 2012] Fit fullrun_ccd1_acisf12187_pi14-548_cl_pass0_src2 appears to have run properly
[Tue Feb 14 23:14:20 2012] fullrun_ccd1_acisf12187_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Tue Feb 14 23:14:20 2012] fullrun_ccd1_acisf12187_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Feb 14 23:14:20 2012] Fit fullrun_ccd1_acisf12187_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Feb 14 23:20:48 2012] Spatial fit model total counts = 12.051600, observed total counts = 13.000000
[Tue Feb 14 23:20:48 2012] Offset between fit and detection position for source 3 = 0.737277 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.737277 pixels
  Position = (580.9, 809.9) = 9 21 44.15 29 28 56.2
  Extent = 1.1 (0.8-1.7)" x 0.4 (0.3-0.6)", rotation angle = 0 (345-18) degrees
  Source counts = 11.9 +/- 3.5
  Background counts = 0.0
  Rate = 0.001 +/- 0.0004
[Tue Feb 14 23:20:48 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 23:20:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 23:20:48 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 23:20:48 2012] Source does appear to be extended
[Tue Feb 14 23:20:48 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.26
[Tue Feb 14 23:32:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 14 23:32:26 2012] Initial guess for spatial extent in simple fitting = 0.77"
[Tue Feb 14 23:32:26 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.945
[Tue Feb 14 23:32:26 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 0.77"
[Tue Feb 14 23:34:58 2012] fullrun_ccd1_acisf12187_pi14-548_cl_pass1_src2.ximg exists
[Tue Feb 14 23:34:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12187_pi14-548_cl_pass1_src2.csv
[Tue Feb 14 23:34:58 2012] fullrun_ccd1_acisf12187_pi14-548_cl_pass1_src2_1.ximg exists
[Tue Feb 14 23:34:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12187_pi14-548_cl_pass1_src2.csv
[Tue Feb 14 23:34:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12187_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12187_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 23:34:58 2012] fullrun_ccd1_acisf12187_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Tue Feb 14 23:34:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12187_pi14-548_cl_pass1_tfrozen_src2.csv
[Tue Feb 14 23:34:58 2012] fullrun_ccd1_acisf12187_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Feb 14 23:34:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf12187_pi14-548_cl_pass1_tfrozen_src2.csv
[Tue Feb 14 23:34:58 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf12187_pi14-548_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf12187_pi14-548_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 14 23:41:26 2012] Spatial fit model total counts = 11.591700, observed total counts = 13.000000
[Tue Feb 14 23:41:26 2012] Offset between fit and detection position for source 3 = 0.082148 pixels
[Tue Feb 14 23:41:26 2012] 11.497300 total counts/ 0.000000 bgd. counts: snr = 118356030604254.671875
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.082148 pixels
  Position = (580.9, 809.9) = 9 21 44.14 29 28 56.2
  Extent = 1.1 (0.8-1.5)" x 0.4 (0.3-0.7)", rotation angle = 0 (343-19) degrees
  Source counts = 11.5 +/- 3.4
  Background counts = 0.0
  Rate = 0.001 +/- 0.0004
[Tue Feb 14 23:41:26 2012] Vigneting correction estimate = 1.000000
[Tue Feb 14 23:41:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 14 23:41:26 2012] Assessing source extent using major axis lower bound
[Tue Feb 14 23:41:26 2012] Source does appear to be extended
[Tue Feb 14 23:41:26 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.11
[Tue Feb 14 23:44:12 2012] Writing source region out to fullrun_ccd1_acisf12187_pi14-548_pass1_cl_src3_src.reg
[Tue Feb 14 23:44:12 2012] Extracting stamp from image fullrun_ccd1_acisf12187_pi14-548_cl_sm2.00.img.gz, (530, 759) - (632, 861)
[Tue Feb 14 23:44:12 2012] Writing fullrun_ccd1_acisf12187_pi14-548_pass1_cl_src3.gif
[Tue Feb 14 23:44:51 2012] Size of ../../acisf12187/products/events/fullrun_ccd1_acisf12187_pi14-548_pass1_cl_src3_src.evt.gz[events] = 12 counts
[Tue Feb 14 23:44:51 2012] Mean chipx,y = (454.08, 796.67)
[Tue Feb 14 23:44:51 2012] Mean tdetx,y = (4335.33, 4561.08)
[Tue Feb 14 23:44:51 2012] chipx,y range = (442.00-472.00, 780.00-812.00)
[Tue Feb 14 23:44:51 2012] Size of ../../acisf12187/products/events/fullrun_ccd1_acisf12187_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 7 counts
[Tue Feb 14 23:44:52 2012] Not generating rmf since there are only 11 counts
[Tue Feb 14 23:44:52 2012] arf not found, will run specextract
[Tue Feb 14 23:45:17 2012] ../../acisf12187/products/spectra/fullrun_ccd1_acisf12187_pi14-548_pass1_cl_src3.warf not found
[Tue Feb 14 23:45:17 2012] ../../acisf12187/products/spectra/fullrun_ccd1_acisf12187_pi14-548_pass1_cl_src3.wrmf not found
[Tue Feb 14 23:45:17 2012] Removal of ../../acisf12187/products/spectra/fullrun_ccd1_acisf12187_pi14-548_pass1_cl_src3.soff failed
[Tue Feb 14 23:46:34 2012] Spectrum 3 has only 11 counts, deleting rmf
[Tue Feb 14 23:46:34 2012] 191.483
[Tue Feb 14 23:51:13 2012] Updating aperture counts using extracted products
[Tue Feb 14 23:51:13 2012] Error reading totcts from fullrun_ccd1_acisf12187_pi14-548_pass1_cl_src3_src.pi.gz
[Tue Feb 14 23:51:13 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 14 23:51:13 2012] Using photon index=1.80, rate=0.00119, arf fullrun_ccd1_acisf12187_pi14-548_pass1_cl_src3.arf
[Tue Feb 14 23:51:13 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 14 23:51:13 2012] Updating source flux to 1.5e-14
[Tue Feb 14 23:51:20 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 14 23:51:21 2012] acisf12187/analysis//spectral/fullrun_ccd1_acisf12187_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete