[Fri Oct 14 23:46:27 2011] Detection parameters:
  Position = (938.9, 562.9) = 0 46 2.07 20 18 46.9
  Extent = 0.9" x 0.6", rotation angle = 70 degrees
  Source counts = 28.2 +/- 5.4
  Background counts = 0.8
  Rate = 0.001 +/- 0.0003

[Fri Oct 14 23:46:28 2011] Off-axis axis estimate = 5.73'
[Fri Oct 14 23:47:33 2011] Using EEF radius (= 1.50 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 23:47:33 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 23:47:33 2011] Initial guess for spatial extent in simple fitting = 1.50"
[Fri Oct 14 23:47:33 2011] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.976
[Fri Oct 14 23:47:33 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.50"
[Fri Oct 14 23:47:33 2011] fullrun_ccd2_acisf12185_pi14-548_cl_pass0_src2.ximg exists
[Fri Oct 14 23:47:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12185_pi14-548_cl_pass0_src2.csv
[Fri Oct 14 23:47:33 2011] fullrun_ccd2_acisf12185_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Oct 14 23:47:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12185_pi14-548_cl_pass0_src2.csv
[Fri Oct 14 23:47:33 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12185_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12185_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 23:47:33 2011] fullrun_ccd2_acisf12185_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Oct 14 23:47:33 2011] fullrun_ccd2_acisf12185_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Oct 14 23:47:33 2011] Fit fullrun_ccd2_acisf12185_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Oct 14 23:47:43 2011] Spatial fit model total counts = 33.859600, observed total counts = 34.000000
[Fri Oct 14 23:47:43 2011] Offset between fit and detection position for source 1 = 0.712713 pixels
[Fri Oct 14 23:47:43 2011] 34.259070 total counts/ 8.834970 bgd. counts: snr = 8.553484
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.712713 pixels
  Position = (939.4, 563.4) = 0 46 2.07 20 18 46.9
  Extent = 0.9 (0.7-1.6)", rotation angle = 0
  Source counts = 25.4 +/- 5.9
  Background counts = 8.8
  Rate = 0.001 +/- 0.0003
[Fri Oct 14 23:47:43 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 23:47:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 23:47:43 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 23:47:43 2011] Source does appear to be extended
[Fri Oct 14 23:47:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 23:48:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 23:48:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 23:48:15 2011] Initial guess for spatial extent in simple fitting = 0.93"
[Fri Oct 14 23:48:15 2011] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.088
[Fri Oct 14 23:48:15 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.93"
[Fri Oct 14 23:48:19 2011] fullrun_ccd2_acisf12185_pi14-548_cl_pass1_src2.ximg exists
[Fri Oct 14 23:48:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12185_pi14-548_cl_pass1_src2.csv
[Fri Oct 14 23:48:19 2011] fullrun_ccd2_acisf12185_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Oct 14 23:48:19 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf12185_pi14-548_cl_pass1_src2.csv
[Fri Oct 14 23:48:19 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf12185_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf12185_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 23:48:20 2011] fullrun_ccd2_acisf12185_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Oct 14 23:48:20 2011] fullrun_ccd2_acisf12185_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Oct 14 23:48:20 2011] Fit fullrun_ccd2_acisf12185_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Oct 14 23:48:39 2011] Spatial fit model total counts = 33.035000, observed total counts = 33.000000
[Fri Oct 14 23:48:39 2011] Offset between fit and detection position for source 1 = 0.038918 pixels
[Fri Oct 14 23:48:39 2011] 33.402060 total counts/ 9.570460 bgd. counts: snr = 7.703477
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.038918 pixels
  Position = (939.4, 563.4) = 0 46 2.07 20 18 46.9
  Extent = 0.9 (0.6-1.5)", rotation angle = 0
  Source counts = 23.8 +/- 5.8
  Background counts = 9.6
  Rate = 0.001 +/- 0.0003
[Fri Oct 14 23:48:39 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 23:48:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 23:48:39 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 23:48:39 2011] Source does appear to be extended
[Fri Oct 14 23:48:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 23:49:21 2011] Not overwriting source region fullrun_ccd2_acisf12185_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 14 23:49:21 2011] Extracting stamp from image fullrun_ccd2_acisf12185_pi14-548_cl_sm2.00.img.gz, (899, 523) - (980, 604)
[Fri Oct 14 23:49:21 2011] Writing fullrun_ccd2_acisf12185_pi14-548_pass1_cl_src1.gif
[Fri Oct 14 23:49:28 2011] ../../acisf12185/products/events/fullrun_ccd2_acisf12185_pi14-548_pass1_cl_src1_src.evt and ../../acisf12185/products/events/fullrun_ccd2_acisf12185_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct 14 23:49:28 2011] Size of ../../acisf12185/products/events/fullrun_ccd2_acisf12185_pi14-548_pass1_cl_src1_src.evt.gz[events] = 31 counts
[Fri Oct 14 23:49:28 2011] Mean chipx,y = (788.61, 472.06)
[Fri Oct 14 23:49:28 2011] Mean tdetx,y = (3533.06, 3297.39)
[Fri Oct 14 23:49:28 2011] chipx,y range = (770.00-806.00, 455.00-487.00)
[Fri Oct 14 23:49:29 2011] Size of ../../acisf12185/products/events/fullrun_ccd2_acisf12185_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 12 counts
[Fri Oct 14 23:49:29 2011] ../../acisf12185/products/images/fullrun_ccd2_acisf12185_pi14-548_pass1_cl_src1_src.img and ../../acisf12185/products/images/fullrun_ccd2_acisf12185_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct 14 23:49:29 2011] ../../acisf12185/products/spectra/fullrun_ccd2_acisf12185_pi14-548_pass1_cl_src1_src.pi and ../../acisf12185/products/spectra/fullrun_ccd2_acisf12185_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct 14 23:49:29 2011] Not generating rmf since there are only 23 counts
[Fri Oct 14 23:49:32 2011] ../../acisf12185/products/lightcurves/fullrun_ccd2_acisf12185_pi14-548_pass1_cl_src1_src.lc and ../../acisf12185/products/lightcurves/fullrun_ccd2_acisf12185_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct 14 23:49:59 2011] 176.698
[Fri Oct 14 23:51:14 2011] Updating aperture counts using extracted products
[Fri Oct 14 23:51:14 2011] Error reading totcts from fullrun_ccd2_acisf12185_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 14 23:51:14 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 23:51:14 2011] Using photon index=1.80, rate=0.0012, arf fullrun_ccd2_acisf12185_pi14-548_pass1_cl_src1.arf
[Fri Oct 14 23:51:14 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 23:51:14 2011] Updating source flux to 1.6e-14
[Fri Oct 14 23:51:25 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct 14 23:51:26 2011] acisf12185/analysis//spectral/fullrun_ccd2_acisf12185_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete