[Thu May  2 10:37:54 2013] Detection parameters:
  Position = (668.7, 585.8) = 20 34 4.10 -59 35 31.1
  Extent = 0.6" x 0.5", rotation angle = 56 degrees
  Source counts = 10.5 +/- 3.5
  Background counts = 1.5
  Rate = 0.0002 +/- 6e-05

[Thu May  2 10:37:55 2013] Off-axis axis estimate = 3.95'
[Thu May  2 12:08:55 2013] Using EEF radius (= 0.81 ")to estimate initial spatial extent for simple fitting
[Thu May  2 12:08:55 2013] Initial guess for spatial extent in simple fitting = 0.81"
[Thu May  2 12:08:55 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.861
[Thu May  2 12:08:55 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 0.81"
[Thu May  2 12:48:18 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass0_src35.ximg exists
[Thu May  2 12:48:18 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass0_src35_1.ximg exists
[Thu May  2 12:48:18 2013] Fit fullrun_ccd3_acisf12182_pi14-548_cl_pass0_src35 appears to have run properly
[Thu May  2 12:48:18 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass0_tfrozen_src35.ximg exists
[Thu May  2 12:48:18 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass0_tfrozen_src35_1.ximg exists
[Thu May  2 12:48:18 2013] Fit fullrun_ccd3_acisf12182_pi14-548_cl_pass0_tfrozen_src35 appears to have run properly
[Thu May  2 13:13:36 2013] Spatial fit model total counts = 15.837900, observed total counts = 16.000000
[Thu May  2 13:13:36 2013] Offset between fit and detection position for source 33 = 0.894265 pixels
[Thu May  2 13:13:36 2013] 15.380450 total counts/ 4.535150 bgd. counts: snr = 5.092672
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.894265 pixels
  Position = (669.2, 586.5) = 20 34 4.10 -59 35 31.0
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source counts = 10.8 +/- 3.9
  Background counts = 4.5
  Rate = 0.0002 +/- 7e-05
[Thu May  2 13:13:36 2013] Vigneting correction estimate = 1.000000
[Thu May  2 13:13:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 13:13:36 2013] Assessing source extent using major axis lower bound
[Thu May  2 13:13:36 2013] Source does appear to be extended
[Thu May  2 13:13:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 14:32:09 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 14:32:09 2013] Initial guess for spatial extent in simple fitting = 0.63"
[Thu May  2 14:32:09 2013] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.943
[Thu May  2 14:32:09 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 0.63"
[Thu May  2 15:13:01 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass1_src35.ximg exists
[Thu May  2 15:13:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12182_pi14-548_cl_pass1_src35.csv
[Thu May  2 15:13:01 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass1_src35_1.ximg exists
[Thu May  2 15:13:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12182_pi14-548_cl_pass1_src35.csv
[Thu May  2 15:13:01 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12182_pi14-548_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12182_pi14-548_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 15:13:02 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass1_tfrozen_src35.ximg exists
[Thu May  2 15:13:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12182_pi14-548_cl_pass1_tfrozen_src35.csv
[Thu May  2 15:13:02 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass1_tfrozen_src35_1.ximg exists
[Thu May  2 15:13:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12182_pi14-548_cl_pass1_tfrozen_src35.csv
[Thu May  2 15:13:02 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12182_pi14-548_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12182_pi14-548_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 15:48:15 2013] Spatial fit model total counts = 14.302600, observed total counts = 16.000000
[Thu May  2 15:48:15 2013] Offset between fit and detection position for source 33 = 0.051237 pixels
[Thu May  2 15:48:15 2013] 13.396540 total counts/ 2.429940 bgd. counts: snr = 7.035164
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.051237 pixels
  Position = (669.3, 586.6) = 20 34 4.10 -59 35 31.0
  Extent = 0.6 (0.5-1.0)", rotation angle = 0
  Source counts = 11.0 +/- 3.7
  Background counts = 2.4
  Rate = 0.0002 +/- 6e-05
[Thu May  2 15:48:15 2013] Vigneting correction estimate = 1.000000
[Thu May  2 15:48:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 15:48:15 2013] Assessing source extent using major axis lower bound
[Thu May  2 15:48:15 2013] Source does appear to be extended
[Thu May  2 15:48:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 16:19:15 2013] Writing source region out to fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src33_src.reg
[Thu May  2 16:19:15 2013] Extracting stamp from image fullrun_ccd3_acisf12182_pi14-548_cl_sm2.00.img.gz, (640, 558) - (698, 615)
[Thu May  2 16:19:15 2013] Writing fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src33.gif
[Thu May  2 16:38:23 2013] Size of ../../acisf12182/products/events/fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src33_src.evt.gz[events] = 12 counts
[Thu May  2 16:38:23 2013] Mean chipx,y = (591.92, 538.58)
[Thu May  2 16:38:23 2013] Mean tdetx,y = (4593.42, 3652.92)
[Thu May  2 16:38:23 2013] chipx,y range = (571.00-603.00, 524.00-558.00)
[Thu May  2 16:38:23 2013] Size of ../../acisf12182/products/events/fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src33_bgd.evt.gz[events] = 21 counts
[Thu May  2 16:38:24 2013] Not generating rmf since there are only 10 counts
[Thu May  2 16:38:24 2013] arf not found, will run specextract
[Thu May  2 16:38:49 2013] ../../acisf12182/products/spectra/fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src33.warf not found
[Thu May  2 16:38:49 2013] ../../acisf12182/products/spectra/fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src33.wrmf not found
[Thu May  2 16:38:49 2013] Removal of ../../acisf12182/products/spectra/fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src33.soff failed
[Thu May  2 16:40:04 2013] Spectrum 33 has only 11 counts, deleting rmf
[Thu May  2 16:40:04 2013] 192.829
[Thu May  2 16:43:18 2013] Updating aperture counts using extracted products
[Thu May  2 16:43:18 2013] Total counts from fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src33_src.pi.gz = 12.00
[Thu May  2 16:43:18 2013] Total counts from fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src33_bgd.pi.gz = 21.00
[Thu May  2 16:43:18 2013] Got source and background scale factors 0.000001, 0.000014
[Thu May  2 16:43:18 2013] User source parameters:
  Position = (669.3, 586.6) = 20 34 4.10 -59 35 31.0
  Extent = 0.6 (0.5-1.0)", rotation angle = 0
  Source aperture counts = 10.2 +/- 4.6
  Background aperture counts = 1.8
  Rate = 0.0002 +/- 8e-05

[Thu May  2 16:43:19 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 16:43:19 2013] Using photon index=1.80, rate=0.000186, arf fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src33.arf
[Thu May  2 16:43:19 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May  2 16:43:19 2013] Updating source flux to 2.2e-15
[Thu May  2 16:43:40 2013] Source 33 has fewer than 100.000000 counts, skipping spectral fitting