[Thu May  2 10:37:54 2013] Detection parameters:
  Position = (556.2, 843.5) = 20 34 11.41 -59 33 24.4
  Extent = 0.8" x 0.6", rotation angle = 95 degrees
  Source counts = 26.4 +/- 5.3
  Background counts = 1.6
  Rate = 0.0004 +/- 9e-05

[Thu May  2 10:37:55 2013] Off-axis axis estimate = 4.73'
[Thu May  2 12:08:55 2013] Using EEF radius (= 1.07 ")to estimate initial spatial extent for simple fitting
[Thu May  2 12:08:55 2013] Initial guess for spatial extent in simple fitting = 1.07"
[Thu May  2 12:08:55 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.868
[Thu May  2 12:08:55 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 1.07"
[Thu May  2 12:48:18 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass0_src20.ximg exists
[Thu May  2 12:48:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12182_pi14-548_cl_pass0_src20.csv
[Thu May  2 12:48:18 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass0_src20_1.ximg exists
[Thu May  2 12:48:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12182_pi14-548_cl_pass0_src20.csv
[Thu May  2 12:48:18 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12182_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12182_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 12:48:18 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Thu May  2 12:48:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12182_pi14-548_cl_pass0_tfrozen_src20.csv
[Thu May  2 12:48:18 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Thu May  2 12:48:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12182_pi14-548_cl_pass0_tfrozen_src20.csv
[Thu May  2 12:48:18 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12182_pi14-548_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12182_pi14-548_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 13:13:36 2013] Spatial fit model total counts = 25.726100, observed total counts = 30.000000
[Thu May  2 13:13:36 2013] Offset between fit and detection position for source 22 = 0.543131 pixels
[Thu May  2 13:13:36 2013] 27.518362 total counts/ 0.006462 bgd. counts: snr = 342.237052
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.543131 pixels
  Position = (556.7, 843.6) = 20 34 11.41 -59 33 24.6
  Extent = 0.9 (0.8-1.1)", rotation angle = 0
  Source counts = 27.5 +/- 5.2
  Background counts = 0.0
  Rate = 0.0005 +/- 9e-05
[Thu May  2 13:13:36 2013] Vigneting correction estimate = 1.000000
[Thu May  2 13:13:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 13:13:36 2013] Assessing source extent using major axis lower bound
[Thu May  2 13:13:36 2013] Source does appear to be extended
[Thu May  2 13:13:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 14:32:09 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 14:32:09 2013] Initial guess for spatial extent in simple fitting = 0.91"
[Thu May  2 14:32:09 2013] source mask rpix=1.8, npix_max = 22, mask sum = 25, frac = 1.134
[Thu May  2 14:32:09 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 0.91"
[Thu May  2 15:13:01 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass1_src20.ximg exists
[Thu May  2 15:13:01 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass1_src20_1.ximg exists
[Thu May  2 15:13:01 2013] Fit fullrun_ccd3_acisf12182_pi14-548_cl_pass1_src20 appears to have run properly
[Thu May  2 15:13:01 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass1_tfrozen_src20.ximg exists
[Thu May  2 15:13:01 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass1_tfrozen_src20_1.ximg exists
[Thu May  2 15:13:01 2013] Fit fullrun_ccd3_acisf12182_pi14-548_cl_pass1_tfrozen_src20 appears to have run properly
[Thu May  2 15:48:15 2013] Spatial fit model total counts = 29.825000, observed total counts = 31.000000
[Thu May  2 15:48:15 2013] Offset between fit and detection position for source 22 = 0.344693 pixels
[Thu May  2 15:48:15 2013] 31.035369 total counts/ 0.477869 bgd. counts: snr = 44.204185
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.344693 pixels
  Position = (556.8, 843.9) = 20 34 11.41 -59 33 24.5
  Extent = 1.0 (0.8-1.3)", rotation angle = 0
  Source counts = 30.6 +/- 5.6
  Background counts = 0.5
  Rate = 0.0005 +/- 9e-05
[Thu May  2 15:48:15 2013] Vigneting correction estimate = 1.000000
[Thu May  2 15:48:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 15:48:15 2013] Assessing source extent using major axis lower bound
[Thu May  2 15:48:15 2013] Source does appear to be extended
[Thu May  2 15:48:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 16:19:15 2013] Writing source region out to fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src22_src.reg
[Thu May  2 16:19:15 2013] Extracting stamp from image fullrun_ccd3_acisf12182_pi14-548_cl_sm2.00.img.gz, (511, 798) - (603, 890)
[Thu May  2 16:19:15 2013] Writing fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src22.gif
[Thu May  2 16:29:52 2013] Size of ../../acisf12182/products/events/fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src22_src.evt.gz[events] = 31 counts
[Thu May  2 16:29:52 2013] Mean chipx,y = (305.58, 543.52)
[Thu May  2 16:29:52 2013] Mean tdetx,y = (4588.48, 3366.58)
[Thu May  2 16:29:52 2013] chipx,y range = (289.00-324.00, 525.00-563.00)
[Thu May  2 16:29:52 2013] Size of ../../acisf12182/products/events/fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src22_bgd.evt.gz[events] = 35 counts
[Thu May  2 16:29:54 2013] Not generating rmf since there are only 30 counts
[Thu May  2 16:29:54 2013] arf not found, will run specextract
[Thu May  2 16:30:19 2013] ../../acisf12182/products/spectra/fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src22.warf not found
[Thu May  2 16:30:19 2013] ../../acisf12182/products/spectra/fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src22.wrmf not found
[Thu May  2 16:30:19 2013] Removal of ../../acisf12182/products/spectra/fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src22.soff failed
[Thu May  2 16:40:04 2013] Spectrum 22 has only 31 counts, deleting rmf
[Thu May  2 16:40:04 2013] 186.022
[Thu May  2 16:43:16 2013] Updating aperture counts using extracted products
[Thu May  2 16:43:16 2013] Total counts from fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src22_src.pi.gz = 31.00
[Thu May  2 16:43:16 2013] Total counts from fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src22_bgd.pi.gz = 35.00
[Thu May  2 16:43:16 2013] Got source and background scale factors 0.000003, 0.000037
[Thu May  2 16:43:16 2013] User source parameters:
  Position = (556.8, 843.9) = 20 34 11.41 -59 33 24.5
  Extent = 1.0 (0.8-1.3)", rotation angle = 0
  Source aperture counts = 28.0 +/- 6.6
  Background aperture counts = 3.0
  Rate = 0.0005 +/- 0.0001

[Thu May  2 16:43:19 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 16:43:19 2013] Using photon index=1.80, rate=0.000519, arf fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src22.arf
[Thu May  2 16:43:19 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May  2 16:43:19 2013] Updating source flux to 6.6e-15
[Thu May  2 16:43:40 2013] Source 22 has fewer than 100.000000 counts, skipping spectral fitting