[Thu May  2 10:37:54 2013] Detection parameters:
  Position = (757.8, 479.9) = 20 33 58.32 -59 36 23.1
  Extent = 0.5" x 0.5", rotation angle = 2 degrees
  Source counts = 18.7 +/- 4.5
  Background counts = 1.3
  Rate = 0.0003 +/- 8e-05

[Thu May  2 10:37:55 2013] Off-axis axis estimate = 4.33'
[Thu May  2 12:08:55 2013] Using EEF radius (= 0.93 ")to estimate initial spatial extent for simple fitting
[Thu May  2 12:08:55 2013] Initial guess for spatial extent in simple fitting = 0.93"
[Thu May  2 12:08:55 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.870
[Thu May  2 12:08:55 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 0.93"
[Thu May  2 12:48:18 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass0_src26.ximg exists
[Thu May  2 12:48:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12182_pi14-548_cl_pass0_src26.csv
[Thu May  2 12:48:18 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass0_src26_1.ximg exists
[Thu May  2 12:48:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12182_pi14-548_cl_pass0_src26.csv
[Thu May  2 12:48:18 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12182_pi14-548_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12182_pi14-548_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 12:48:18 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass0_tfrozen_src26.ximg exists
[Thu May  2 12:48:18 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass0_tfrozen_src26_1.ximg exists
[Thu May  2 12:48:18 2013] Fit fullrun_ccd3_acisf12182_pi14-548_cl_pass0_tfrozen_src26 appears to have run properly
[Thu May  2 13:13:36 2013] Spatial fit model total counts = 20.996200, observed total counts = 23.000000
[Thu May  2 13:13:36 2013] Offset between fit and detection position for source 17 = 0.813944 pixels
[Thu May  2 13:13:36 2013] 20.741200 total counts/ 3.711300 bgd. counts: snr = 8.839935
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.813944 pixels
  Position = (758.4, 480.4) = 20 33 58.31 -59 36 23.1
  Extent = 0.6 (0.4-0.8)" x 0.3 (0.2-0.4)", rotation angle = 4 (336-33) degrees
  Source counts = 17.0 +/- 4.6
  Background counts = 3.7
  Rate = 0.0003 +/- 8e-05
[Thu May  2 13:13:36 2013] Vigneting correction estimate = 1.000000
[Thu May  2 13:13:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 13:13:36 2013] Assessing source extent using major axis lower bound
[Thu May  2 13:13:36 2013] Source does appear to be extended
[Thu May  2 13:13:36 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.87
[Thu May  2 14:32:09 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 14:32:09 2013] Initial guess for spatial extent in simple fitting = 0.42"
[Thu May  2 14:32:09 2013] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.214
[Thu May  2 14:32:09 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 0.42"
[Thu May  2 15:13:01 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass1_src26.ximg exists
[Thu May  2 15:13:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12182_pi14-548_cl_pass1_src26.csv
[Thu May  2 15:13:01 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass1_src26_1.ximg exists
[Thu May  2 15:13:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf12182_pi14-548_cl_pass1_src26.csv
[Thu May  2 15:13:01 2013] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf12182_pi14-548_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf12182_pi14-548_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 15:13:01 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass1_tfrozen_src26.ximg exists
[Thu May  2 15:13:01 2013] fullrun_ccd3_acisf12182_pi14-548_cl_pass1_tfrozen_src26_1.ximg exists
[Thu May  2 15:13:01 2013] Fit fullrun_ccd3_acisf12182_pi14-548_cl_pass1_tfrozen_src26 appears to have run properly
[Thu May  2 15:48:15 2013] Spatial fit model total counts = 20.870800, observed total counts = 23.000000
[Thu May  2 15:48:15 2013] Offset between fit and detection position for source 17 = 0.018630 pixels
[Thu May  2 15:48:15 2013] 20.609760 total counts/ 3.675660 bgd. counts: snr = 8.832720
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.018630 pixels
  Position = (758.4, 480.4) = 20 33 58.31 -59 36 23.1
  Extent = 0.5 (0.4-0.9)" x 0.3 (0.1-0.4)", rotation angle = 4 (340-28) degrees
  Source counts = 16.9 +/- 4.5
  Background counts = 3.7
  Rate = 0.0003 +/- 8e-05
[Thu May  2 15:48:15 2013] Vigneting correction estimate = 1.000000
[Thu May  2 15:48:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 15:48:15 2013] Assessing source extent using major axis lower bound
[Thu May  2 15:48:15 2013] Source does appear to be extended
[Thu May  2 15:48:15 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.88
[Thu May  2 16:19:15 2013] Writing source region out to fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src17_src.reg
[Thu May  2 16:19:15 2013] Extracting stamp from image fullrun_ccd3_acisf12182_pi14-548_cl_sm2.00.img.gz, (733, 455) - (783, 505)
[Thu May  2 16:19:15 2013] Writing fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src17.gif
[Thu May  2 16:33:16 2013] Size of ../../acisf12182/products/events/fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src17_src.evt.gz[events] = 17 counts
[Thu May  2 16:33:16 2013] Mean chipx,y = (721.12, 498.59)
[Thu May  2 16:33:16 2013] Mean tdetx,y = (4633.41, 3782.12)
[Thu May  2 16:33:16 2013] chipx,y range = (702.00-735.00, 483.00-517.00)
[Thu May  2 16:33:16 2013] Size of ../../acisf12182/products/events/fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src17_bgd.evt.gz[events] = 9 counts
[Thu May  2 16:33:18 2013] Not generating rmf since there are only 16 counts
[Thu May  2 16:33:18 2013] arf not found, will run specextract
[Thu May  2 16:33:42 2013] ../../acisf12182/products/spectra/fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src17.warf not found
[Thu May  2 16:33:42 2013] ../../acisf12182/products/spectra/fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src17.wrmf not found
[Thu May  2 16:33:42 2013] Removal of ../../acisf12182/products/spectra/fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src17.soff failed
[Thu May  2 16:40:04 2013] Spectrum 17 has only 17 counts, deleting rmf
[Thu May  2 16:40:04 2013] 192.933
[Thu May  2 16:43:17 2013] Updating aperture counts using extracted products
[Thu May  2 16:43:17 2013] Total counts from fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src17_src.pi.gz = 17.00
[Thu May  2 16:43:17 2013] Total counts from fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src17_bgd.pi.gz = 9.00
[Thu May  2 16:43:17 2013] Got source and background scale factors 0.000000, 0.000011
[Thu May  2 16:43:17 2013] User source parameters:
  Position = (758.4, 480.4) = 20 33 58.31 -59 36 23.1
  Extent = 0.5 (0.4-0.9)" x 0.3 (0.1-0.4)", rotation angle = 4 (340-28) degrees
  Source aperture counts = 16.6 +/- 5.2
  Background aperture counts = 0.4
  Rate = 0.0003 +/- 9e-05

[Thu May  2 16:43:19 2013] Calculating source flux in energy range 0.30-8.00
[Thu May  2 16:43:19 2013] Using photon index=1.80, rate=0.000287, arf fullrun_ccd3_acisf12182_pi14-548_pass1_cl_src17.arf
[Thu May  2 16:43:19 2013] Assuming count rate is from the 0.20-8.00 bandpass
[Thu May  2 16:43:19 2013] Updating source flux to 3.4e-15
[Thu May  2 16:43:40 2013] Source 17 has fewer than 100.000000 counts, skipping spectral fitting